Borewell

Geological survey charges for selection of Borewell point DER No. 220/2024-25/31-12-2024

Drilling of tube well by down to the hole hammer drilling to finished dia of 6 ½ (6.5", ) in all formations suitable for down the hole hammer drilling such as hard rock to hard rock formations all consolidated formations etc., and roaming the boat to suit insertion of 177.8mm dia PVC with 6kg/sqm pressure caps and any other relevant materials required up to the depth as directed by the department, transporation of drilling rigs and support vehicles and including bore drvelopment (flushing the bore well at an averae of 100 PSA onducting yeild test view charges, cost of consumables, trasportation charges all other materials and all other charges required in fixation of pipe assebly complete all done to the satisfaction of the department and as stipulated in the technical conditions in any where in TS but excluding of the cost of casing pipe, coupling caps and entire work shoud be carried out as per IS 2800 part 1 &II 1979 and as amended from time to time.-Drilling of 165 mm 6 ½'' (6.5" ) Borewell with DTH Rig (As per Standard specifications) for one meter-375 DER No. 220/2024-25/31-12-2024

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potablewater supplies conforming to IS: 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional storesanywhere in TG including Excise duty and Sales Tax - For Casing

280mm dia 6 kg/Sqcm

180mm dia 6 kg/Sqcm

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete.(Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)

Supply and Transportation of 2.00HP 25 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon ELEC5.6.1

Supply and Transportation of 1.50HP 21 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon ELEC5.6.1

Supply & Fixing of 3 Core ---------------- Flat Copper cable of ISI for Submersible Motors. Makes : Polycab / GM / Million / VGuard / Gold Medal / Kundancab / HPL/ RPG / Nandicab / Payal / Finecab /Gemini / Vimal / Suncab / ELEC1.6.4

Supply & Fixing of 6 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab ELEC1.6.2

Supply and Transportation & Fixing of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LK (L&T) / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc., complete. ELEC5.11.1

Supply, Transportation and fixing of 50mm dia 90 °C bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc.,complete ELEC5.15.3

Supply, Transportation and fixing of 50mm dia MS flanges set (2 Nos) 150mm dia OD, 12mm thick each flange with required dia bolts and nuts including cost and conveyance of all materials, taxes etc., complete ELEC5.15.4

Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 32 mm NB Size TBSP-G.III-12

Supply, Transportation and fixing of 40 mm 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts. ELEC5.15.6

Supply, Transportation and fixing of 150 mm dia galvanised bore cover ELEC5.15.6