REPAIR TO ROAD ROAD FURNITURE WITH ALLIED SERVICES AT KWC AREA AND METCALFE AREA UNDER GE I RnD DELHI

Amount

Material and labour for repair to pot holes not exceeding 1 sqm area including sweeping free from dust and mud or water scoring sunken surface in road,path etc cutting around edges at least 30mm in depth & making good by filling in, screened and graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat @ 10 Kg/10 Sqm of VG-30 ,Grade paving bituminous binder complete all as specified and directed.

M&L for preparing of existing black top surface by brooming or brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dust etc and applying evenly a priming/ tack coat with bituminous primer of paving bitumen(VG-30) @ of 5 Kg /10 Sqm with mechanical sprayer and laying of Bituminous premixed Semi Dense Asphaltic Concrete 25 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler (OPC cement) as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. The content of Bitumen specified in this item is maximum content,in case, the quantity of Bitumen required is less as per approved design mix, the minus price adjustment for less quantity of bitumen shall be made @Rs.50.00/Kg Note " Material shall be broght at site from approved / authorised Hot Mix plant at any distance. Hot mix plant shall be got approved from GE(I).

M&L for Premix bituminous macadam using 40 mm well graded crushed stone aggregate with 4% binder content by weight of total mix (using paving bitumen of grade VG-30 grade confirming to IS: 73:2013), laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) completed all as specified and directed. Note:- (i) Mixing of bituminous concrete shall be in Hot Mix Plant. (ii) Premix bituminous concrete shall be designed considering the bituminous contents as specified and as directed. Hot mix plant shall be got approved from GE(I).

M&L for painting hinting lines on roads n exc 15cm wide with hot applied thermoplastic compound paint confirm to MOST specified painting as per manufacturers direction specification, mechanically applied to form 1.5mm thick film on road lined including cleaning and drying the existing road surface dust, oil, grease and moisture free surface before applying the paint complete all as specified and directed.

S&F in repair Plastic Speed Bump designed so dynamically and compact that it can bear maximum load on it. It is made of PE plastic material. Two highly reflective reflectors moulded in PMMA material welded with ABS base plate through ultrasonic welding process and then fixed on the speed bump so that dust and water cannot touch the reflectors inside area and thus it maintains its reflectivity for a long time. 04 Nos metallic bolts are used for installation on road. Available in Yellow and Black colours. Dimensions: L=750mm, width=250 mm & Height=75 mm to be installed complete all as specified and directed.

S&F in repair Solar road stud of size 125mmx125mmx25mm single piece moulded aluminium alloy body with bility of having pprox 10Tons load bearing capacity powered by monocrystal solar panel of 2.4v/0.3W,one Ni-Mh or NI-cd reachargeable battery (1.2V/1600MA),six super bright LEDs with 10000 to 18000 mcd(millicandela) with flashing frequency of 1-2Hz and view distance apprx 1000mtrs,high brightness LEDs of red/amber colours as approved with backup up to 3days after bfull charge incl fixed with epoxy complete all as specified.Make : Dark eye(DHRUV),Sinor Infrastructure,Oscar Safety solution.

S&F in repair Road studs (Cat eyes) size 100mm x 100mm x 20mm made of Aluminium Alloy die casted dynamically designed very high impect strenght having 10 Tons Load Bearing Capacity, and fitted with highly reflective reflactors and 2 Nos. of 43 beads each side of red/ amber colours as approved fixed with epoxy complete all as specified and directed.

S&F in repair for convex mirror for size 800mm to 1000mm made of PC material provided with suitable corrosion free MS pipes 75mm dia with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, 'T' junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, having 130 degree of viewing angle complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over concrete/plastered surfaces along with prepration of new or previously untreated surfaces of any description over 10cm width or girth with one coat of priming paints plaster coat all as spd and as directed by Engineer-in-Charge

S&F in repair Stainless steel (Grade 304) hollow round or square pipe of any dia /size fixed as in posts / sheds/ chair / railing and making frame structure for fixing sign board with knock-down fixing system & Top Mounted Round Baluster made of 38 to 50mm mm dia Stainless steel 304 Grade ,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engr-in-Charge including with making post holes or similar each n.exc 0.50 cum demolishing concrete and getting out, at least one/third height of poles/posts shall be embedded in PCC 1:2:4. The height of posts/poles shall be 1.5 to 2.5 mtr from ground level, complete all as specified and directed. Note:- Design/pattern of Railing shall be got approved by GE before commencement of work.

S&F in repair direction sign board of any size with 2mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting as base and with cut out massage (legends borders letters / numerals etc) as directed with high intensity prismatic grade retro reflective sheeting both side site of boards with epoxy powder coating, including fixed over framed work of stainless steel including necessary excavation and pcc work for fixing board all as specified and directed by Engineer-in-Charge. The following specification for sign board to be used:- (i) Paper used for printing should be 170 GSM 3M Reflective Vinyl. (ii) Printing of letter with Mutoh Eco Solvent. (iii) Base of Material should be used should be 3mm Alcabond

S&F as in repair MS Road Delinator square type colour black ,height 1000mm width 100mm weight 2.5kg appx including fixing in ground with necessary PCC work in CM 1:3:6 complete all as specified and directed.Make : 3M,Oscar Safety solution,Dark Eyes,

Demolition of PCC of any description and in any position not otherwise specifically provided including removing the demolished material out side MoD land in low laying area complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. complete all as specified and directed. (Precast C.C. kerb stone shall be as per sample kept in office of AGE B/R R&D Delhi).

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing and laying 60 mm thick factory made chemfered edges cement concret paver block of M-35 grade with approved colour, design and pattern as in footpath, park, lawns or light traffic parking etc of required strength , thickness, size shape made by table vibrating mehod uding PU mould laid in required colour and pattern over and including 50mm thick compacted bed of fine sand compacing and proper embedding/laying of interlocking paver block in sand bedding layer through vibrating compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at approved municipal dumping ground complete as per direction.

SAWARIYA ENGINEERS AND CONTRACTORS (BID ID -3458039)

R K GOEL ABHEY KUMAR JAIN (BID ID -3447972)