Sainik Rest House

Amount

Description

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of engineer-in-charge.

Providing & fixing in position vitreous Chinaware white flat back or angular lipped front urinal of approved make (to the approval of the Engineer-in-Charge) of size 460x350x260mm with C.P brass tube connection 300mm long complete in all respect.

Vitreous white Chinaware partition

Small partition size 680mm x 300mm

Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes lines and making good the same to its original condition.

Size 75mm x 75mm

Size 225 mm x 225 mm

Providing and Fixing FMD Door Sintex make complete with chowkhat and Aluminium fitting complete in all respects.

Size 2'-3" x 7'-0"

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. (Labour Rate)

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect.(Labour Rate)

Providing & Fixing in postion vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass piller tap complete in all respect.

Size 560mm X 430 mm

Providing & Fixing in position stop cock /Angle valve of approved make (to the approval of Engineer in Charge) Complete in all respect.

CP brass 15mm Angel valve without flange.

Providing and fixing in position 15mm C.P. Brass Pillar Cock of approved make (to the approval of Engineer-in-charge)

Providing & Fixing in position 15mm i/d bib cock of approved make (to the approval of Engineer in Charge) Complete in all respect.

C.P. brass bib cock without flange

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

110mm o/d PVC pipe of 4 Kgf. / sqcm

Providing & Fixing in position PVC flexible tube connection of approved make (to the approval of Engineer in Charge) Complete in all respect.

PVC tube connection of size 15 mm X 450 mm with CP brass nut

Providing and fixing in position Centrifugally cast iron specials for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:3989) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.

For 100mm i/d pipes

Single junction plain

Providing and fixing in position S.S. Grating with frame of approved make (to the approval of Engineer-in-charge) complete in all respect (Previously item no.30.104)

Dismantling concrete or precast concrete

Cement concrete plain 1:3:6

Dismantling brick work tile masonary or tile lining

In cement

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Plastering on walls 6 mm thick cement plaster 1:3

Providing and fixing jet spray with 2'-6" long PVC pipe

With C.P Brass nut

Khurra on roof as per item no. 13.45 with CI Spouts 100 mm dia fixed in position

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand).