Providing partition for the Research Labs of SOM at Admin Block in IISER campus, Vithura

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Fixed Portion Anodised aluminium (Aluminium sections alone will be supplied by IISER at free of cost all other materials like aluminium angles, screws, fischer, rivets, beadings, etc shall be provided by the contractor)

Providing and fixing in wall lining using 12 mm thick Calcium Silicate Boards RAMCO or equivalent with necessary fixing arrangements and screws etc. All joints shall be provided with adhesive dry wall joint tap, joint putty, etc complete all as directed by EIC

FIXED TOUGHENED GLASS PARTITION :Providing and fixing internal glass full height partition using approved brand, DORMA or equivalent Aluminium profile with necessary seals for 10mm fixed glass. Fixed partition would be constructed by AT44, W44XH45mm frame all around with required gaskets and square profile 11x11mm at 90 degree joint profile 10x6mm should be used to seal the glass to glass joint, MRT 59x29.50mm to be used in the intersection as required etc complete all as directed by the EIC.

INTERNAL FRAMELESS TOUGHENED GLASS DOOR : Providing & fixing internal frameless glass door 10mm thick to be mounted on to AT50 door frame, 45x50mm compatible with MR 28. Internal glass fittings for 10mm glass using DORMA or equivalent EV1 Aluminium silver finish corner hinges and studio gala lock with lever handle as approved by IISER. DORMA or equivalent T589 cam action door closer with side channel mounted on to internal glass door using suitable DORMA or equivalent saddle plate, etc complete all as directed by EIC (A) 900x 2100 mm Toughened Single Leaf door (Approx dimenion )

Supply and applying of approved shade of frosted film as per the design in the designated areas. The surface preparation should be made before the installation in order to attain a smooth finish. The films should be installed towards the clean surface with the help of recommended patch tools etc., as required. The films should be fixed towards the glass in the designated area as per the design and comments from the engineer-in-charge. Total glass area covered without deduction of cut patches/design will be considered for payment

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the wall surface to prepare the surface even and smooth complete.

Applying priming coat with primer of approved brand and manufacture, having low VOC (volatile organic compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Two coats or more coats