REPLACEMENT OF OLD LED LIGHT WITH REQUIRED CABLE & CLAMP AT VARIOUS LACATION IN OKHA NAGAR PALIKA VISTAR LIKE OKHA BET DWARKA SURAJKARDI AND ARAMBHADA FOR OKHA NAGAR PALIKA UNDER SJMMSVY 2025-2026 GRANT (UDP-88)

Name of Work: - REPLACEMENT OF OLD LED LIGHT WITH REQUIRED CABLE & CLAMP AT VARIOUS LACATION IN OKHA NAGAR

PALIKA VISTAR LIKE OKHA BET DWARKA SURAJKARDI AND ARAMBHADA FOR OKHA NAGAR PALIKA UNDER

SJMMSVY 2025-2026 GRANT (UDP-88)

Sr. Quantity S.O.R. DISCRIPTION OF MATERIAL SOR 1% L.C. Net Amount.

No. NO. Rate Rate

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270V, Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>100

lumens/watt . LED driver efficiency > 85 %. (fittings required LM-79 & LM-

80 c e r t i f i c a t e s ) ( NOTE: Below description have shown ranges of

Wattage capacity of LED f i t t i n gs . The Engineer in charge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection-4KV integral and , Light must have 440 VAC line

supply with over -voltage protection.

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured copper cable

KV grade to be erected as directed of following size.

(B) 2 core 2.5 Sq. mm

Providing and erecting Street Light pole bracket comprising main B Class MS pipe

of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr.

length with 110 deg. with vertical plane & suitable welded stays, reducer and with

3 740 Each 6-5-2a check nuts complete painted with one coat of red oxide / PU base primer and 620.00 6.2 626.2

two coats of Aluminium / PU paint. paint with following no’s of arms. [A] Single

Arm Bracket 1.5 MT