CAMOUFLAGE TO CERTAIN BUILDING AND BOUNDRY WALL FOR AREA IN JURISDICTION OF AGE BR-I AT AF STN SIRSA

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking down Cement Plaster including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering(External) 15mm thick in Cement Mortar 1:4 on Brick work or on Concrete Surfaces up to double storey,mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even , complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Uniform, complete all as specified and as directed.

Supply only Integral Water Proofing Compound, ISI marked (as approved), complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls by applying a Wall Putty, cutting / rubbing to obtained a smooth surface and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as directed ) with approved Tint over a coat of Primer as per manufacturer's instructions, complete all as specified and as directed.

M&L Preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as directed ) with approved Tint over a coat of primer as per manufacturer's instructions, complete all as specified and as directed. NOTE: Painting shall not be carried by spray gun

M&L Preparing old treated/painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality) in Camouflage/ Plain pattern, complete all as specified and as directed.

M&L Preparing Old Decorated/Treated Plastered Surfaces of Walls up to Double storey by complete removal of existing Treatment and by applying two coats Wall Putty,cutting/rubbing to obtained a smooth surface and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as directed ) with approved Tint over a coat of primer as per manufacturer's instructions, complete all as specified and as directed.

M&L Preparing Old Decorated/Treated Plastered Surfaces of Walls up to Double storey by brooming down or steel wire brushing and Scrapping down and applying One Coat of Weather Coat Exterior Paint (in Camouflage/Plain pattern as directed ) with approved Tint over a coat of primer as per manufacturer's instructions, complete all as specified and as directed.

M&L Preparing Old Decorated/Treated Plastered Surfaces of Walls up to Double storey by brooming down or steel wire brushing and Scrapping down and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as directed ) with approved Tint over a coat of primer as per manufacturer's instructions, complete all as specified and as directed.

M&L Preparing Old treated /Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) in Camoufalge pattern for CGI Sheet Roofing , complete all as specified and as directed. NOTE: (a) Height of Roof Surfaces in shed 6.00 Meter(approximately) (b) Painting will be carried out by Spray Gun.

M&L Repairing of RCC Projection, Chajjas, Roofs Facia, Column etc, upto Double Storey Building height adhering proper safety precaution and including necessary preparation i.e. scrappring, cutting, chiseling and cleaning exposed reinforcement surfaces of damaged, loosed RCC surfaces and applying one coat of cement slurry and filling the surfaces with Cement Concrete 1:1½:3 (12.5mm gradded stone aggre-gate) and reinforced with welded mesh of weight RCC using coarse sand in patches area, complete all as specified and as directed.. NOTE : Cost of Form work and welded Mesh shall be deemed to be included in the Quoted Unit Rate..

DCM ENTERPRISES

Aditi Formation Company

M/s Har Nandi Construction Company

Sethi Builders

YESH BUILDERS

AGGARWAL CONSTRUCTION CO.

SHIV SHANKAR ENTERPRISES

M/S GODARA CONSTRUCTION CO.