PROVISION OF PCC PATH ALONG OUTER SECURITY WALL AT VISAKHAPATNAM PROVISION OF WEATHER PROOF SHED ON 3 RD FLOOR TERRACE OF MWC BLDG NO P 61 AT NAVAL DOCKYARD PROVISION OF DEFICIENT OFFICE ACCOMMODATION FOR AGE B R III OF GE NB AND REPLACEMENT OF

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 27 Cm deep and getting out in Hard / Dense soil complete all as specified and as directed.

M & L for Excavation over areas, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) in flooring / hard standing finished even and fair complete all as specified and as directed.

Removing Excavated soils exceeding 1.50 KM and not exceeding 5.0KM and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep & getting out in soft / loose soil and removing rubbish outside MD land, complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc., and getting out in hard / dense soil, complete all as specified and as directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in two coats i.e., 1st coat of 10mm thick in cement mortar 1:6 and top coat of 5mm thick in cement mortar 1:4 including mixing of water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed .

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed .

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap inser for top top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 15 & 16 : Make of PVC frame / shutter / ventilator shall be of make Sintex / Nandi / Rajshri Plasti Wood.

S&F 100 mm long [ ISI marked ] medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

S & F [ISI marked] 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M & L for Coloured joint free Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.11 Sq. M, in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing / plinth protection complete all as specified and as directed.

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

S&F PVC (SWR) pipe [ ISI MARKED ] 110mm bore single socketed with rubber ring joints laid in floors, trenches or fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F 110 mm bore PVC ( SWR ) , bends of any radius complete all as specified and as directed. Make : Supreme / Prince

S&F PVC (SWR) pipe [ ISI MARKED ] 75 mm bore single socketed with rubber ring joints laid in floors, trenches or fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F 75 mm bore PVC ( SWR ) , bends of any radius complete all as specified and as directed. Make : Supreme / Prince

S & F 25mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors / trenches complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete all as specified and as directed. Make of WHB : M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality) Make of Pillar tap : M/s Hindware / Orient / Seiko / Dripless

S & F Fancy type chromium plated 15 mm bore Angle / plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S & F 25 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed including taking down the existing valve complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and as directed.

M/L for PVC(SWR) Plain floor trap 75mm dia outlet with grating incl jointing with solvent cement fixed in cement concrete B1 (1:2:4) complete all as specified and as directed. Make : Supreme / Prince / Finolex

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Use and waste of rough finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and white pigment 30 cm X 30 cm X 20-25 mm thick, set, jointed and pointed in neat cement slurry in floors, the colour and pattern of tile as in floors over and including screed bed or bedding layer in cement mortar 1:6, 15mm thcik, colour and design of tiles shall be as approved by Accepting Officer complete all as specified and as directed. Make: Ultra, Bansal, Nitco.

Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to out side MD land complete all as specified and as directed.

Cutting holes through brick work/RCC into or through cement concrete slabs, chajjas, etc. reinforced or otherwise exceeding 100 Sqcm and not exceeding 250 Sqcm and making good in cement mortar 1:3 of RCC 1:2:4 Type B1 as required complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

S&F mild steel work as in tubular trusses / purlins and tubular posts including special shaped washers etc. complete using butt welded tubes confrming to I.S.1161-1979 Grade St.-240 and painted one shop coat of zink chromate primer paint (including preparation of surface) at Contractor's work shop before fabrication complete all as specified and as directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment steel of Fe 410-W (Gde E250) quality-B complete all as specified and as directed.

S&F mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / Jindal

M&L for preparing new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in sub base of floorings over a neat cement coat by Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

M&L for designer pattern chequered cement concrete tiles with grey cement and white pigment 30 cm X 30 cm X 20-25 mm thick, set, jointed and pointed in neat cement slurry in floors, the colour and pattern of tile as in floors over and including screed bed or bedding layer in cement mortar 1:6, 15mm thcik, colour and design of tiles shall be as approved by Accepting Officer complete all as specified and as directed. Make: Ultra, Bansal, Nitco.

Rough Excavation not exceeding 1.5 M deep and getting out in Soft / Loose Soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc., and getting out in soft/ disintegrated rock, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in columns, pillars, piers, posts and like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in beams, linetels over 1.5 Metre span and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in chajjas and like complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of columns, pillars, piers and like, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of beams, lintels and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of chajjas and similar work complete all as specified and as directed.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

Providing and injecting chemical emulsion for Anti termite Treatment to back fill in contract with foundation @ 7.5 Litre per square metre complete all as specified and as directed. Note: Area of sub structure in contact with back fill to be measured.)

Providing and injecting chemical emulsion for Anti termite Treatment to top surface of filled earth @ 5 Litre per square metre complete all as specified and as directed.

Providing and injecting chemical emulsion for Anti termite Treatment to soil under plinth protection @ 5 Litre per square metre complete all as specified and as directed.

Providing and injecting chemical emulsion for Anti termite Treatment to soil along with external perimeter @ 2.5 Litre per square metre complete all as specified and as directed.

M&L for application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt and lay APP based polymeric membrane minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/Sqm) shall be laid over tack coat on slab and on verticle surface upto and insert in grooves and packed in CM (1:3) with overlaps in members 100mm, the over laps shall be sealed by flames or as per manufacturer's instuctions. A coat of hot blown bitumen @ 1.2 Kg/Sqm shall be applied over water proofing membrane all as specified and directed. MAKE : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

S&F factory made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [Two Panel] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

S & F [ISI marked] 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F Floor Door Stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M&L for preparation of new wood and wooden based surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for preparing newly plastered / untreated surfaces of internal walls, and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper: Asian / Nerolac / Berger (All 1st quality)

M&L for preparing newly plastered surfaces of internal ceilings, and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper: Asian / Nerolac / Berger (All 1st quality)

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) of size 600mm x 600mm as in floors etc. set and jointed over and including Screed bed or bedding layer of 1:6 in Cement Mortar 15mm thick over 25 mm thick PCC 1:2:4 type B0, (Using 12.5 mm graded stone aggregate) over brushing neat cement slurry with 3.0kg of cement per sq. metr as in floors for laying floor finishes and pointed in white or coloured cement to match complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for Coloured joint free Non Skid ceramic tiles of size 600 x 600mm x 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.11 Sq. M, in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Joint free Glazed ceramic tiles 300 x 600 x 6 to 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:4 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L 18mm to 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F sink with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 405 mm x 355 mm x 160 mm complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52, / M/S JAYNA/ NIRALI

M & L for PVC (SWR) gully trap of 125 / 110 mm setting and jointing with solvent cement complete all as specified and as directed. Make : Supreme / Prince

S & F 20 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

S & F 15 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

S&F for 15mm bore, 45 cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed in repairs complete all as specified and as directed. Make : Prayag / Watertec

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified and as directed. Make of WC and Flushing cistern :M/s. Parry ware/ M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F15 mm bore chromium plated bib tap of fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F brass cromium plated Health faucet, standard size, complete all as specified and as directed. Make: CERA / PARRYWARE / HINDWARE

M & L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 90 cm long suitable steel sink waste complete fixed in repairs complete all as specified and as directed.

M&L in repairs for 125 mm dia brass chromium plated shower rose with swivel joints fixed complete all as specified and as directed.

Supply and Fix 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

M&L for Powder coated aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F 10mm thick powder coated anodised aluminium deco grill DG-102, including joining cleat for fixing and necessary fixing arrangements as required, complete all as specified. Make: HINDALCO / INDALCO/JINDAL

S&F powder coated aluminium sections for ventilator shutters, fixed type aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, including and deco grill and all necessary fittings complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

S&F aluminium powder coated window frame with shutters sliding pattern consisting of three tracked frame and 03 shutters (2shutters glazed with 4mm thick tinted glass fixed with suitable EPDM rubber beading and one shutter with stainless steel mosquito proof wire cloth made of 0.45mm nominal dia wire and average aperture 1.4mm) including Aluminium powder coated grill of make "Deco grill" and DG -202 model with aperture of size 60 X 40mm, suitable 'F' or 'E' sections fixed to window frame for securing Deco grill and necessary hanbdles/locking arrangements for shutter of Jindal sections Window Frame( Top & Sides) : 21137, Bottom L 20977, Window shutters : Top & Bottom : 20567, Sides : 20738 or equivalent of Hindalco & Indalco complete all as specified and as directed.

M & L for Excavation over areas, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft / loose soil complete all as specified and as directed.

M & L for Excavation over areas, depth exceeding 1.5 M and not exceeding 3 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M&L for Plain Cement Concrete type C2, 1:3:6 (Using 40mm grded granite stone aggregate in concrete bed to drainpipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 150mm dia of pipes complete all as specified and as directed.

M&L for 150mm dia reinforced concrete pipes class NP 2 drain pipes laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for loose filling with aggregate of gauge 80 to 150 mmin soakage pits complete all as specified and as directed.

S & F 15 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed including taking down the existing valve complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition )in any floors/ roofs,beams, stair cases , Landings , Chajjas and similar suspended articles and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

Forming jambsetc, to openings, including cutting, toothing and properly bonding into old work, also facing, joining and pointing to match existing work complete new work built in cement mortar 1:4 complete all as specified and directed.

M&L Powder coated aluminium window / ventilator shutters, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 of 100mm long (2 no.), suitable handle (1no.), complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Sheet glass 5 mm thick, ordinary quality and glazing with and including anodised aluminium snap beading or rubber / reopren bead in squares not exceeding 0.5Sq.m in each pane, complete all as specified and as directed. Make: HINDUSTAN PILKINGTON GLASS / MODIGUARD.

S & F in repairs door clooser Aluminium extrude section body hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. Make : Godrej / Everite / Priya

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position complete incl taking down old grid complete all as specified and as directed.

M & L 12mm thick Seamless calcium silicate ceiling (of desired pattern and design as approved) made out of 1800 x 1200mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm C/C including finisihing the joint and face board with specially formulated jointing compound & 48mm wide fibre tape to provide seam less finish. Note: Frame work for ceiling shall be measured and paid seperately.

M&L for preparing ceiling surfaces and applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for Vitrified ceramic tiles 10 mm thick (Square/ Rectangular) polished, Dark shade, area of each tile exceeding 0.36Sqm and not exceeding 0.42 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes over and including 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in sub base of floorings complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, Dark shade, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 Sq. M, as in dado / Skirting etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and incuding rendering as in backing coat 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for point wiring with two runs of single core 1.5 Sq.mm (Nominal area) PVC insulated unsheathed [ISI marked] FRLS grade stranded copper conductor cable 1100 Volts grade drawn through and including concealed PVC rigid conduit non-metallic 20 mm bore Medium grade including 1.5 Sq.mm PVC insulated unsheathed FRLS grade copper cable solid conductor as earth lead including MS consealed/ semi concealed terminal boxes made of 2mm thick MS sheet covered with 3mm thick laminated sheet complete all as directed for One light / fan / Bell point controlled by one way switch

All as per item No. 123 above but for one 3 pin socket outlet 5 amps on independent board complete all as specified and as directed.

All as per item No.123 above but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point including 2.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

All as per item No. 123 above but with 4.0 Sqmm FRLS copper cable for one geyser/AC/ Water cooler point including 4.00 Sq mm FRLS copper conductor cable for earth continuity conductor cable as earth continuity conductor and connecting it to earth dolly complete all as specified and as directed. Note for item Nos123, 124, 125 & 126 : Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Modular type socket 6A 2/3 Pin Combined AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MKMake: MK / Legrand / ROMA / ABB

S&F Modular type socket 6 A/ 16A 2/3 Pin Combined multi purpose AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MKMake: MK / Legrand / ROMA / ABB

S&F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular type bell push single pole 6 Amps AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed. Make : Legrand / Cona / Anchor / Bajaj

S&F in repair stepped type modular fan regulator,100 W 1 module complete all as specified and as directed. Make: MK / Anchor(Roma) / ABB

S&F modular white cover plate with frame 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 4 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 8 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S & F 36 W LED Recessed slim panel fitting of size 2' x 2' with all accessories internally prewired and including connecting up with single core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton Cat No. LCPL -36-CDL 2' x 2' or equivalent in Havells / Philips

S & F 12 W LED down lighter with aluminium housing with all accessories internally prewired and including connecting up with single core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton Cat No. LCDN -12-CDL/TL/W/W or equivalent in Havells / Philips

S&F Telephone jack deluxe with shutter 2 line with metal box complete all as specified and as directed. Make: CONA / ANCHOR

S&F TV outlet socket with metal box mini complete all as specified and as directed. Make: CONA / ANCHOR

S&F Modern jack for computer with shutter for LAN complete all as specified and as directed. Make: CONA / ANCHOR

S & F Rigid non-metalic PVC conduit(20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and as directed. Make: AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/ PRECISION/ KALINGA [ ALL ARE ISI MARKED ]

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 6 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 2.5 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 4 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 25mm dia along with one run of 6.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, 4 run of 6 Sq.mm cable and 1 run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S & F MCB SP 6 to 32 Amps, 240 Volts, Gold Plus MCB C curve, complete all as specified and as directed. Make: Indo Asian / L&T / C&S / Schneider / Legrand

S & F MCB SPN 40Amps 240 Volts Gold Plus MCB C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS

S&F Distribution Board, SPN 6 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S & F VTPN 4 way DB double door 415 V having provision for TP MCCB upto 125 Amps in 16 KA to 25 KA [Frame 1] as incomer complete all as specified and as directed. Make: Indo Asican Cat part No. NVMCB04 or its equivalent in L&T /STANDARD

S&F in repairs MCCB 415 Volt 16 KA 3 Pole 63 Amps Capacity complete all as specified and as directed. Make: /Indo Asian. Cat Part No. 830036 / Havells / Schneider

S &F Exhaust fan 230 / 240 Volts AC single phase oscillating 300 mm sweep heavy duty with loures with specification of 1400 rpm, input watt-82W, current 0.35A, free airflow - 1950 cum/hour and noice level 45-50db complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I (2009) including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

M & L One 3 pin socket out let 6 Amps on same board complete all as specified as directed.

S&F Modular metal flush box, but 1/2/3 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F Modular metal flush box, but 4 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F Modular metal flush box, but 6/8 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F 'CUB' LED 30W street light ,pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lensus with all accessaries including 1.5 M long 40/32 mm dia GI pipe bent to shape, MS flat bracket mounting clamps, bolt, nuts and washers, 1 Sq mm weather proof 3 core FRLSLS grade copper conductor to fitting complete all as specified and as directed. Make: Crompton Greaves Cat part No.LSTS-30-CDL or equivalent in Philips/ Havells/Bajaj/Surya

S&F Distribution Board, SPN 12 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F surface batten for 1x20 Watt LED tube light with PC body all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable sith suitable size complete all as specified and as direted of Make :Crompton Greaves cat pt No. IGP131LT8-16 or equivalent in Philips/Bajaj

S&F LED Tube light 20 W with retro LED T8 (PC) bar professional WH 5700K of cool white Complete all as specified and as directed. Make : CG Cat No. LT8-20-865-2 equivalent in Philips/Bajaj/Surya.

S & F LED Mirror Light " Linnet " 10 Watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE mirror 10 watts / Crompton Cat Part No LCL-10-CDL / HPL Cat no. HLPT51510CW / Bajaj / Havells

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc., and getting out in soft / loose soil, complete all as specified and as directed.

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 3.5 Core, 25 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

Supply and spreading clean dry sand as in cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

S&F Distribution Board, TPN, 4 Way, Double door with 200 Amps bus bar complete all as specified and directed. Make : Indo Asian cat part No. 811841[Optipro] / Standard / Havells / HPL

S & F MCB, TPN 40 Amps 415 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811218 [ Optipro] / STANDARD / HAVELLS

Supply and lay un reinforced precast concrete cable covers fonfirming to IS 5820-1970 class LV Type 2 Flat of size 230 x 150 x 70mm trenches as protection to cable complete all as specified and as directed.

Supply, installation and testing of solar Water Heating system at 60⁰ C (Average) temperature comprising of following main accessories complete all as per manufacturers instructions and as directed. (a) Flat Plate collector (as per BIS 12933),01 No for each system of 300LPD (b) Stand for the collectors (c) Hot water tank (SS-304) TIG welded with PUF insulation & Stainless Steel Outer cladding (d) Stand for hot water Tank (e) Hydraulic steam hose pipe with check nut (f) Air vent 1 No for each system and 15 Amps Power point - 01 No Note: The quoted rate shall be deemed to be inclusive of PCC Bed for Solar stand and all accessories as per manufacturers requirement to make the system functional to achieve required parameters. Make : INTER SOLAR / RA COLD / TATA POWER / EMMVEE

S&F Brass Hot Water pipe 15 mm bore, duly insulated with 25mm thick bounded minerall wool performed "SYPHON" pipe section of density 144 kg/cum including wire mesh and aluminium foil cladding with all fittings and fixed complete to walls all as specified and as directed.

S&F Brass Hot Water pipe 20 mm bore, duely insulated with 25mm thick bounded minerall wool performed "SYPHON" pipe section of density 144 kg/cum including wire mesh and aluminium foil all fittings and fixed complete to walls all as specified and as directed.

Supply and Fix 750 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Supply and Fix Ball brass Valves [ ISI Marked ] suitable for 20 mm bore pipe , high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and as directed. Make : M/s General Machine Tools & Engineering Works / Hind Trading & Mrs Co / Agarwal Products

S & F GI water tubing of 20 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections and testing, complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

S & F in repairs 15 mm bore chromium plated bib tap of fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

D.CH.SURYA PRAKASH

SRI SURYA PROJECTS

P SRINIVASA RAO