Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC KHUSHMARA KAKRABAN UDAIPUR GOMATI DISTRICT PIN 799105 | UDAIPUR | GOMATI | TRIPURA | 799105 | ₹10.7 L Quoted ₹10.9 L | L1 | Accepted-AOC Being a 1st lowest |
Tender Value
₹9.7 L
EMD Value
₹19,381
Closing Date
6 Feb 2026, 3:00 pmClosed
Executive Engineer DWS Division Udaipur
O/o the Executive Engineer DWS Division Udaipur
Peridcl Mtc of WS schme at KBN undr ARWSP (Sub-Mission)/Cons of 0.65 MGD WTP incl all allid wrks at KBN/SH/Operatn,Mtc upkpmnt of 0.65 MGD cap of SWTP 2025-26.
2026_CEDWS_69799_1
DNIeT No. 84/EE/DWS/DIVN/UDP/2025-26
Open Tender
Civil Works - Water Works
120 days
Kakraban
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹19,381
16 Mar 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
Providing and applying of different chemicals for production of quality treated water as per guideline of WHO/BIS parameters.
i) Alum (garde -I) m/c 15-16% alumina contect 1X132.97X120 =15948 kg
ii) Hydrated Line (Grade-I)Dose 12 mg/litre
Providing and mixing bleaching powder grade-I, active chlorine should be minimum 33% (16 hours operation) X 30 days in/c applying, loading and stacking etc. complete in all respect as per direction of the Engineer in Charrge .
Providing salt for generation of chlorine solution (hypo) as per direction of the Engineer in Charge
Providing and fixing C.I sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer in-Charge.
i) 100 mm dia. PN-1.6
ii) 150 mm dia. PN-1.6
iii) 200 mm dia. PN-1.6
Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design.
Provoding and fixing MS bolts including nuts and washers complete as per standard design :- Upto 300 length.
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.
i) 35 HP/26 kw Relay range within 20-32 + 10%
ii) 75 HP/ 55 kw Relay range within 45-75 + 10%
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge.
ii) 200 Amps
Making supplying and fitting fixing of MS spindles in/c. socket for sluice valve as per departmental sample
i) 80 mm dia
ii) 100 mm dia
iii) 200 mm dia
iv) 250 mm dia
Providing and fitting fixing of directly mounting Thermal overload Relays of L&T make . Type ML as per direction of Engg-in-Charge.
i) Relay Range(A) 20-32 Cat No. SS918900E0
ii) RelaY Range (A) 28-42 Cat No. SS918500F0
iii) Type Mk 1 relay Range(A) 9-14 cat No. Cat No. SS9003500A0
Providing and fitting fixing of spare contact kit ML Series of L&T make as per direction of Engg-in-charge.
i) Type ML2 Cat No. SS95307
ii) Type ML 3 Cat No. SS95309
Providing and fitting fixing of spare coil ML Series L& T make as per direction of Engg-in-Charge
i) Type ML2/ML3 Cat No. SS90443
Providing and fitting fixing of combination coil MK1 of L&T make Cat No. SS90443 as per direction of Engg-in-Charge.
Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. i) 10 sqmm
Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Charges for lifting of pump, motor, column pipe etc. from intake well and stacking the same at suitable place as per specification and the direction of the Engineer-in-charge.
Repairing of V.T. pumps by providing and replacing of G.M. bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of Rubber bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of MS lock ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of bronze impeller ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of SS shaft ( SS-410) ) as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of CI bowel case as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing of V.T. pumps by providing and replacing of CI suction/discharge case as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Repairing line / top shaft of different capacity V.T. pumps by welding, grinding, threading, centering etc as per specification and the direction of the Engineer-in-charge.
i)for 40000 / 50000 GPH capacity V.T. pump
Charges for Cleaning of deposited sand, clay etc from the intake well both inside and outside by manual means with necessary staging etc. as per direction of the Engineer-in-charge.
Engagement of Mechanics for minor repairs of v.t Pump and other equipments of SWTP as per direction of the Enginee-in-Charge
Mechanics
Helper
Charges for cleaning of sedimentation/ Clariflucculator tank SWTP complete job as per direction of the Engineer in Charge
Helper =6No's X Rs.479.10 = 2874.60
Charges for Cleaning of filterbed and Inspection chamber of SWTP complete job as per direction of the Engineer in Charge
Helper= 4 NO's X Rs. 479.10 = Rs. 1916.40
Charges for cleaning of clear water reservoir of SWTP complete job as per direction of Engineer-in-Charge
Helper= 4 NO's X Rs. 479.10 = Rs. 1916.40
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_71035.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.75 MB
DNIeT_84_Operatn_SWTP_SD_KBN.pdf
Tender Documents • 2.75 MB
BOQ_71035.xls
BOQ • 0.41 MB
Annx.pdf
Additional Documents • 0.46 MB
Download all tender documents and submit your bid