Rubbing of old existing floor of EB-V/5, and sanitary fitting in EB-IV/4 electrical installation works in one room of Civil Complex, HPSEBL Colony, Sundernagar

Demolishing cement concrete manually /by mechanical means and disposal of material within 50mtrs. Lead as per direction of Engineer in charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:3:6 (1cement :3coarse sand):6graded stone aggregate 20mm nominal size)

Providing and fixing 10mm thick acid and /or alkali resistant tiles of approved make and colour using acid and /or alkali resisting mortor bedding ,and joints filled with acid and /or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in charge

40 mm thick marble chips flooring rubbed and polished to granolithic finish in EB-V/5

Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed steelconduit, with piano type switch, phenolic laminated sheet,suitable size MS box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required :Group -B

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp. Socket outlet.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 PIN 15/16 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 Amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. asrequired.

Supplying and fixing call bell/ buzzer suitable for singlephase, 230 V, complete as required.

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earthbar,dinbar,interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator):-12 way Double door

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. 63 Amp.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire withthe following sizes of FRLS PVC insulated copperconductor, single core cable in surface/ recessed mediumclass PVC conduit as required. 2x2.5 sqmm +2.5sqmm earth wire

Installation, testing and commissioning of pre-wired, fluorescent fitting / compactfluorescent fitting of all types, complete with all accessories and tube etc.,including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring thedown rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.:- 25 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front includingpainting etc as required. 150 mm X 75 mm X 60 mm deep

Providing and fixing floor mounted white vitreous china single piece, single traps syphonic water closet of approved brans/ make, shape size and pattern including interfared white viterous china cistern cera/ equivalent make size 670x360x680 mm ivory white of capacity 10 litres with dual flushing system, including all fittings with seat cover, cistern fittings nuts bolts and gasket etc including making connection with the existing P/S trap, including dismantling of existing one complete in all respect as per direction of EIC.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing Unplasticised P.V.C.connection pipe with brass union: 45 cm long 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Please Enable Macros to View BoQ information