WBMAD/ULB/KM/NIT-17(e) /Dev/2025-2026/Sl No-12

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (asnecessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including rakingout joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. Ref. Page- 48, Item -6,iii) PWD SOR Vol-I w. e. f. 1.11.2017

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or hamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excludingcost of chipping over concrete surface] (i) With 1:6 cement mortar(c) 15 mm thick plaster Ref. Page- 16, Item -16, PWD SOR Vol-I w. e. f. 1.11.2017

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. Ref. Page- 192, Item -15, PWD SOR Vol-I w. e. f. 1.11.2017

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Ref. Page-99, Item -1, PWD SOR Vol-II Iw. e. f. 1.11.2017

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. Ref. Page-105, Item -15, PWD SOR Vol-II Iw. e. f. 1.11.2017

(a) Priming one coat on steel or other metal surface with synthetic ound primer of approved quality including smoothening surfaces sandpapering etc Ref.Page- 200, Item -1(a)i, c,PWD SOR Vol-2 w. e. f. 1.11.2017

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering ingusing of approved putty etc. on the surface, if necessary : b) On steel or other metal surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Page- 200, Item -2(A)b,( iv), PWD SOR Vol-2 w. e. f. 1.11.2017

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to eceivedecorative textured (matt finish) or ooth finish acrylic exterior emulsion paint including scraping and preparing the hly,complete as per manufactur- er's specification and as per direction of theEICIn Ground Floor: (a) One Coat Page- 196, Item -8(a), PWD SOR Vol-2 w. e. f. 1.11.2017

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion Page- 197, Item -17,(a), PWD SOR Vol-2 w. e. f. 1.11.2017

Add 18% GST

Add 1% Cess