Loading…
Loading…
Tender Value
₹1.9 L
EMD Value
₹2,000
Closing Date
17 Jun 2026, 4:00 pmClosed
DEPUTY EXECUTIVE ENGINEER,
Providing Temporary E.I. and D.G. Set for stand by power supply for Celebration of Yoga Day -2026 at Modasa Dist. Arvalli. on 21-06-2026
313601
01/01 of 2026/2027
Open
Electrical
Works
Sabarkantha
11 documents required · 11 mandatory
₹600
EXECUIVE ENGINEER, Electrical (R&B) Division, Himatnagar
₹2,000
11 Jun 2026
11 Jun 2026
11 Jun 2026
17 Jun 2026
11 Jun 2026
Providing Temporary E.I. and D.G. Set for stand by power supply for Celebration of "
Name of Work :-
Yoga Day -2026 " at Modasa Dist. Arvalli. on 21-06-2026
Sr. No. Qty Item Rate in Figure & Word. Unit Amount in Rs.
Sign of Contractor Dy. Exe. Engineer
Modasa Elect. (R&B) Sub-Division.
Providing Temporary E.I. and D.G. Set for stand by power supply for Celebration of " Yoga Day -2026 " at Modasa Dist.
Name of Work: -
Arvalli. on 21-06-2026
Quantity DISCRIPTION Rate in Figure & Words Unit Amount
Higher charges for providing erecting and Removing after use of good
Rupees Two hundred
running condition 300 mm/ 400 mm size low noise oscillation type pedestal
1 20 1st Days /Nos 295.93 Ninety Five Paise Ea.
fan of good condition.
Ninety Three Only
Hire charges for providing for temporary plug point with 5/15Amp plug
Rupees Twenty Six
2 35 1st Days /Nos switch combined, erected in wooden board complete 26.26 Ea.
Paise Twenty Six Only
Hire charges for providing, erecting & dismantling after use of good running
condition for PVC copper /Aluminium wire mains with suitable copper PVC Rupees Only
1.5 / 2.5 Sq.mm earth wire of following size
3 1st Days (A) 2 wire 1 /1.5 / 2.5 Sq.mm Copper Rupees Four Paise
1st Days (C) 2 wire 4 /6 Sq.mm Copper Rupees Five Paise
Hire charges for providing erecting as per direction of Engineer in charge
Rupees Twenty Three
1st Days dismantling after use of good running condition for temporary power supply
650 23.23 Paise Twenty Three Rmt.
/RMT. the XLPE insulated armoured cable Aluminium conductor of following
4 size.(D) 3 1/2 Core 35 Sq.mm
(E) 3 1/2 Core 50 / 70 Sq.mm
1st Days Rupees Thirty One
/RMT. Paise Thirty One Only
Hire charges for providing, erecting with necessary connection and
dismantling after user of good running ELCBs/RCCBs conforming to IS
12640 and having sensitivity of 30 ma and short circuit withstand capacity of Rupees One hundred
5 4 6 KA and Suitable for operation on 3 Phase and neutral 415V having 195.94 Ninety Five Paise Ea.
characteristic of quick action & tripping with all advance feature & do not Ninety Four Only
incorporate any electronic component for following Max rating(B) 63 Amps
Hire charges for Providing & erecting weather proof, dust & vermin proof /
floor mounted Front operated outdoor type cubical Panel board having IP
64 protection made from 14 SWG thick CRC MS sheet for outer body and
doors, 16 SWG thick CRC MS Sheet for internal partition with neccessary
supporting angles, flats including cutting.bending , drilling, welding revetting,
with internal Partition and cable alley as per requirement & instruction of
Engineer in charge with SUPPLY AND ERECTION OF of following type
switchgears /busbars with suitable size of inter connecting PVC copper wire/
copper strips,rubber grommets,rib,earth bus and earth bolt, foundation
flange- bolts - base plates, sufficient Nos. of Hinged doors, handles with
locking arrangement &rubber gasket complete .The panel shall be painted
with epoxy powder coating and have Cu. Busbar strips
. Each bus bar should insulated by color coded sleeve. WITH PHASE
INDICATING Lamps--- Digital Multi function meter - Voltage, Amperes &
Frequency only) with CTs coils) Each panel will contain earth bus and earth
bolts with danger notice board.
[C] Power Distribution Cubical Panel with main incomer 125A also with Rupees Eight
1st Days change over switch of 125A TPN MCCB - 1 Nos., 200 A Alum. Busbar, Thousand Two
/Nos. Outgoing 16A SP MCB 10 KA - 6 Nos, [Panel size 800mm H x 600 mm W x hundred Seventeen
350 mm D] Paise Thirty Six Only
200 A Four Pole Moulded Case Circuit Breaker with spreader terminal and Rupees One
1st Days indication lamp mounted on cubical panel with complete proper termination . Thousand Nine
/Nos. hundred Sixty Nine
Paise Fifty Only
Hire charges for Supplying and erecting ISI mark Medium class RIGID PVC
1st Days /Flexible Pipes erected on/in wall or ceiling erected with necessary fittings & Rupees Four Paise
/RMT. boxes fixed with adhesive solution & Clamps in approved manner as Four Only
Hire charges for LED Flood Light Fittings with High Power White LEDs
wattage of 1 Watt and above assemble on single MCPCB, efficiency more
than 130 Im/w and corrosion free high pressure die cast aluminium housing
with smooth finish powder coated and heat sink extruded aluminium with
diffuser and Polycarbonate optics/lenses with company mark/name
engraved or embossed 120 to 300 V, Power factor more than 0.95,
Rupees Nine hundred
1st Days / THD<10%, CCT 5000 K to 5700K (Colour should be provided as per
9 45 994.85 Ninety Four Paise Ea.
Nos. Instruction of Engineer Incharge), Uniformity ratio >0.45, Luminaire
Eighty Five Only
efficiency > 85 Lumens/Watt, LED driver efficiency >85%.
CREE/OSRAM/PHILLIPS Lumileds /NICHIA/SEOUL/BridgeLux(U.S.A)
make LED used for luminaire. (Each fitting required LM-79 & LM-80
Certificates) (B) Flood Light (IP-65), Surge -4KV ( e ) Above 150 watts to
240 watts Cat-III
Hire charges for providing, erecting and dismantling after use portable type Rupees One
Air-conditioning machine complete with erection ,gas charging and required Thousand Nine
10 2 1st day / No. flexible duct & required drain system etc. for 0.75 /1.0 Ton per one day as 1952.33 hundred Fifty Two Ea.
per instruction of engineer in charge. Paise Thirty Three
Hire charges for providing erecting and dismantling after use of good Rupees Two
running condition Industrial Air Cooler With Water filling erected as per Thousand Three
11 6 1st day / No. 2310.88 Ea.
instruction of engineer-in -charge hundred Ten Paise
Eighty Eight Only
Hire charges for providing & dismantling earth pit of minimum bore
dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of
1st Days / 25 mm having 200-250 Micron galvanizing, connection terminal dia of
12 7 770.63 hundred Seventy Ea.
Nos. 12mm with constant ohmic value surrounded by highly conductive
Paise Sixty Three Only
compound with high charge dissipation suitable for following type of
applications(a) For Electrical Installation up to 440V in normal soil Length of
pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.
Hire charges for providing, erecting, and dismantling after use Flexible PVC
insulated multistrand multi core 1.1 kv grade lSl marked copper wires for Rupees Twenty Eight
580 sound system of following size. (A).2 5 Sq.mm 3 core round l PVC sheathed 28.28 Paise Twenty Eight Mtr.
(B).4.0 Sq mm 3 core round PVC sheathed
1st Days / Rupees Forty Two
Mtr. Paise Forty Two Only
Hire charges for 440V A.C generating set following capacity with necessary
Rupees Twenty Four
fuel, mains, switchgears & accessories complete running on load / no load
1st Days Thousand Six hundred
14 1 with acoustic sound proof enclosure etc as per requirement. With 24652.08 Ea.
/Nos. Fifty Two Paise Eight
transportation charges up to 30 kms.[F] 125 KVA
Rupees One Lakh Ninety Four thousand Thirty One Paise Ten Only
I/ We am/are willing to carry out the work at_________% above / below percent (should be written in figure & words) of the estimated mentioned above. Amount of my / our
tender works out as under.
Estimated amount put to Estimated amount put to
Tender Rs. ___________________________ Tender Rs.
Deduct ________ % below Rs. ____________ Add_______%Above
(a) I/we hereby declare that we have visited the site and fully exquisite myself/ourselves with the Local situation regarding materials labour and other factors pertaining to
work before submitting Tender.
(b) I/we hereby declare that we have carefully studies the conditions of contracts. Detailed Specification and other tender document of this work and agree to execute the
same accordingly.
If required and found necessary material to be used for this work and brought at site will have to sent to Govt.approved laboratory. The qualified agency/ manufacturer
1 of Particular product under testing will have to pay/ bear necessary charges.
2 All works shall be carried out as per public works Department hand book and other Specification.
3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.
3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.
The material to be used in this work must be as per instruction by under liason of Engg. In charge.The agency will have to agree to carried out the work as per
4 brand/make demand of concern deptt.
5 Contractor must have registration in "E-2" & above class registered under elect. (R & B) division .
6 The agency will have to agree to carried out the work as per brand/make demand of concen Deptt.If instead so by concern Deptt.
Dy. Exe. Engineer
Sign of Cont Modasa Elect. (R&B) Sub-Division.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
ANNEXURE A.pdf
ANNEXURE C.pdf
ANNEXURE E.pdf
G S T LTR.pdf
GR.pdf
NOTICE NO 01.pdf
PQ.pdf
SBD Document.pdf
SCHEDULE A AND B.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .