GE/KHU-31/2020-21 PROVISION OFTOILET BLOCK AND VEH REPAIR SHED AT ACHINATHANG UNDER GE KHUMBATHANG

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in Hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soil complete all as specified and directed.

M&L Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M & L PCC 1 : 4 : 8 Type D2 (40 mm graded aggregate) as in foundation and mass concrete complete all as specified and directed complete all as specified and directed.

M & L Precast cement concrete block masnory with solid blocks, 1: 3: 6 with solid blocks set in cm 1: 4 exc.10 cm in width and setting in mortar complete complete all as specified and directed.

M&L 10mm th cement plaster in CM (1:4) on stone masonary or surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of stone masonary work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of oil emulsion distemper including chalk whiting preparatory to distempering complete all as specified and directed.

M&L for preparating surface plastered and applying two coat of cement base paint over one coat of cement base primer complete all as specified and directed.

M&L second class soft wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints, etc. complete all as specified and directed.

S & F 2nd class Hard wood plain framed panelled shutters (any No of pannels ) 40 mm thick with panel of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers as in doors all as specified.

S & F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F 125mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F Mild Steel sliding door bolts, 150 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

M & L for 50mm thick in PCC 1:3:6 type-C2 as in plinth protection surface finished even and smooth without using extra cement all as specified.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roof, walls etc with grade of zinc coating 275 complete all as specified and directed by Engnr-in-charge.

S&F flat iron, purlin, trussed , rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe410-W (Gde-E-250) quality-A complete all as specified and directed by Engnr-in-charge.

M&L 75 mm thick Cement concrete type D-2 , 1:4:8 (40mm graded aggregate) in floors complete all as specified and directed.

M & L 25 mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed.

M & L for screed or bedding layer 15mm thick in cement mortar 1:6 finished even and fair on floors for laying floor finishes

M&L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L for backing coat rendering layer 15 mm thick in cement mortar (1:4) finishsed even and on verticle surfaces complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 300x 200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

M&L for PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) complete all as specified and directed.

M&L for Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

M&L for PVC(SWR) pipes single socketed, if any lenth with rubber ring joints, laid in trenches or in floor (110mm bore) complete all as specified and directed.

M&L for PVC (SWR) bends any redius 110 mm bore complete all as specified and directed.

M&L for SGSW gully traps square as round mounted type 'S' 150x100mm complete all as specified and directed.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S & F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F Bib taps of 15 mm dia., cost copper alloy with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed complete all as specified and directed.

S & F in repairs Vitreous china wash basin, table top min size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug complete all as specified and directed.

S&F 25 mm bore Pillar taps, cast copper alloy, with capstorn heeds, chromium plated, screw down high pressure with or without lattered Hot or Cold with long screwed shranks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 25 mm bore Stop valve cost copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed complete all as specified and directed.

S&F Grating round 140mm size of PTMT complete all as specified and directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified and directed.

S&F Tower rail 450mm long of PTMT fixed with and incl chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm

S&F rotational moulded polythene, two layered, water storage tank 500 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing to iron pipe for making connections complete all as specified and directed .

M and L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation and mass concrete complete all as spd and as directed.

S&F steel work in tubular pipes (medium weight) including special shaped washer etc complete using ERW or induction butt welded tubes complete all as spd and as directed.

S&F plates (plain or chequered) square cut or notched forming holes, without any attachment complete all as spd and as directed by Engnr-in-charge.

M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of Zink chrome primer complete all as spd and as directed.

M & L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L for 100mm thick PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M/S SK TRADERS