Repair of old District Library Dhalpur Kullu

Amount

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) 35 mm (Thirty five millimetre) thick shutters.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (Twenty five millimetre) to 40 mm (Forty millimetre) thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (One point four millimetre) in both directions with wire of dia 0.63 mm (Zero point sixty three millimetre), for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock wood .within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm (One hundred x Fifty eight x One point ninety millimetre).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm (Two hundred fifty x Sixteen milimetre).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10 mm (Two hundred x Ten millimetre).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm (One hundred twenty five millimetre).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Kilogram/square metre) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm (Six hundred x Six hundred millimetre) .within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer- in- charge (Frame work shall be paid for separately) 12mm (Twelve millimetre) thick commercial ply conforming to IS : 1328 BWR type with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (Twenty x Ten x Two millimetre) and braced with flat iron diagonals 20x5 mm (Twenty x Five millimetre) size, with top and bottom rail of T-iron 40x40x6 mm (Forty x Forty x Six millimetre), with 40 mm (Forty millimetre) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and fixing 2 mm (Two millimetre) thick PVC venty flooring plain or coloured, carbed, or mosiac mettled finish laid withh approve, adhesive a sub floor (damp prof, treatment to be paid seperately).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (Eighteen millimetre) thick stone slab over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

20 mm (Twenty millimeter) cement plaster of mix 1:4 (1 cement: 4 coarse sand).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point ninety litre/ Ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eighty litre/ Ten square metre of approved brand and manufacture.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

French spirit polishing One or more coats on old work.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Repairs to plaster of thickness 12 mm (Twelve millimetre) to 20 mm (Twenty millimetre) in patches of area 2.5 sq.meters (Two point five square metres) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, With cement mortar 1:4 (1cement: 4 coarse sand).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm (Fifteen x Ten x Ten centimetre) with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm (Twenty millimetre) nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, Door chowkhats.within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres (Fifty metres) lead,within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand).within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.

NEERAJ SHARMA