WELCOME MAINT, PERIODICAL SERVICES AND EXTERNAL PAINTING TO CERTAIN BLDG AT AF STN JODHPUR UNDER AGE B/R-II, GE (AF) NO 2 JODHPUR

Amount

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for complete removal of old treatment by mechanical means from walls and applying one coat of alkali resistance primer two coats of wall putty and sanding and applying two coats of oil bound destemper ( OBD) white or tinted by pump roller applicator as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site. Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note-Quoted rate shall be deemed to be include for cutting holes /demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and removing from site.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars.

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, complete.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples

S&F 300 mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F floor door stopper, with 140 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each.

S&F in repairs aluminium handles, cast type, anodised, of size 150mm.

S&F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F in repairs150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples

M&L for welding in repairs n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm.

S&F 18/19 mm thick, prelaminated particle board, ISI marked, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work for doors, partitions, on wall, in cup boards//kitchen cabinets etc., in shelves, partitions and shelves of built in cup board, almirah, book case, toilet boxes, racks, pelmets etc. and similar works.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm.

S&F 40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finished.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed

M&L for second class hard wood plain fillets, of sectional area n. exc. 3 sqcm, square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union.

S&F in repairs 15 mm bore health faucet CP brass with complete with fixing accessories

S&F in repairs 15 mm bore brass CP mixer for mixing hot and cold water screwed down for iron pipe.

S&F in repairs PVC pressure jet for EWC, heavy duty.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F in repairs 32/40 mm bore PVC waste pipe of suitable length suitable for WHB/Sink.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed complete all as specified.

S&F in repairs pillar tap 15 mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs plastic water closet seat, coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs single mirror bath room cabinet moulded body and frame (made from strong and fine quality ABS plastic) with hinged door of size 16''x12''x6'' white or ivory colour fixed on wall with appropriate rawl plugs. Make : Prayag/Polytuff

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

Taking up or down steel tubing 15 mm bore of pipe and connections including away from site

Supply and laying in repairs 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F in repairs stainless steel plate rack, 0.56 mm thick of standard pattern, of size 788x915x254 mm (31"x36"x10") complete.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for light & dark coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 117.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

S&F in repairs drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engineer-in-Charge.

S&F in repairs decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod or as directed by Engineer-in-Charge.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at the junction of floors and walls using chemical emulsion at the rate of 1.00 litre per hole at 300 mm internal including drilling holl of 12 mm dia at the junction of floors and walls and sealed including making good existing surface complete all as specified and directed

M&L for preparation of old plastered and un plastrered surfaces of walls and applying one coat of oil bound distemper (OBD) white or tinted including removing existing nails if any any nos filling the disturbed surface/ holes making good smooth surface as directed.

M&L for preparation, of removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls and applying one coat(finished coat) of oil bound distemper (OBD) white or tinted over one coat 1mm thick wall care putty removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids to achive the smooth surface as directed by Engr-in-charge

M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat of cement base paint, white or tinted, all as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for complete removing/scrapping down existing surface of old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coat of plastic emulsion paint over a coat of alkali resistant primer, over a thin layer of wall care putty

Preparing old surfaces plastered or unplastered surface of wall by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and trading oil and greasy spots washing rubbing down and stopping of previously untreated /painted surface and M&L for applying one coat of (finishing coat) of cement base paint in diffrant tint/shade as approved by Engineer-in-charge Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

Preparing old painted surfaces of wall labels etc n.exc 0.1 sqm each including cutting in edges and appying one coat of synthatic enamel paint complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high using synthetic enamel paint Ist quality complete all as specified and directed.

M&L for writing Stops, commas, short lines, dashes, hyphens brackets etc using synthetic enamel paint Ist quality complete all as specified and directed.

Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

BEYLIM INFRA

BAGHELA CONSTRUCTION

M.A. MUNSHI AND CO.

GB Group & Co