Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC ACCEPTED L1 | |
| 2 | L2₹31.7 L+₹89,415.15 (2.90%)Rejected-Finance | L2 | Rejected-Finance Being rejected L2 | |
| 3 | L3₹31.8 L+₹99,772.50 (3.23%)Rejected-Finance | L3 | Rejected-Finance Being rejected L3 | |
| 4 | L4₹32.4 L+₹1.6 L (5.10%)Rejected-Finance 2076 2077 CHIRIMAR MOHALLA AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Being rejected L4 | |
| 5 | L5₹32.6 L+₹1.8 L (5.74%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Being rejected L5 |
Tender Value
₹85,948
EMD Value
₹85,948
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA EE IDSE
GE (SOUTH) AMBALA CANTT
CA NO GE (SOUTH) AMB 52 2023 2024 PROVISION OF CERTAIN BR AND EM REV MINOR SANCTIONED WORKS OF AGE BR I (SOUTH) UNDER GE (SOUTH) AMBALA CANTT
2023_MES_622639_1
GE(SOUTH)/AMB-52/2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹85,948
Yes
18 Dec 2023
11 Oct 2023
16 Nov 2023
11 Oct 2023
14 Nov 2023
1 Nov 2023
11 Oct 2023 - 24 Oct 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed.
Material and labour for broken stone hard core of gauge exceeding 63mm but not exceeding 150mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed.
Material and labour for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base and mass concrete complete all as specified and directed.
Material and labour for PCC 1:3:6 type E-2 using 40 mm graded mechanically crushed stone aggregates as in foundation and mass concrete complete all as specified and directed.
Material and labour for providing and laying factory made PVC moulded, dark red/yellow coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. Note:- Size and shape of interlocking tile shall be approved by Engineer -in-Charge/GE
Material and labour for providing and laying factory made PVC moulded, dark red/yellow coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. Note:- Size and shape of interlocking tile shall be approved by Engineer -in-Charge/GE
Material and labour for providing and laying of precast cement concrete solid concrete block, type B-1, 1:2:4 (using 20mm graded stone aggreagate) confirming to IS 2185 (Part-I) 2005 of 45/30 cm high, 10 cm thick and of suitable width including chamfers, weatherings, throating etc as in kerb continuous edging jointed in cement mortar 1:4 and struck flush pointing as the work proceeds and finishing with neat cement flush joint etc complete all as specified and directed.
Material and labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in concrete on edge for sealing interlocking tiles and coping, roof kerbs or mud stops and the like, rounded or chamfered on edges etc complete all as specified and directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface in any type soil complete all as specified and directed.
Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with 85/25 grade bitumen and sand (1:3 ratio) mixture etc complete all as specified and directed.
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of colour approved by GE, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based plain steel sheet, 0.50mm thick, conforming to IS-15961, of colour approved by GE, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), complete all as specified and directed.
Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe290-W(Gde-E-165), complete all as specified and directed.
Supply and fixing of rolled mild steel work in tubular frame work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed
Supply and fixing of mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe-410 (Gde 250), complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Material and labour for brick work with fly ash bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Material and labour for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork etc in cement concrete 1:2:4, type B-0 using 12.5mm graded mechanically crushed stone aggregate complete all as specified and directed.
Material and labour for 40mm thick PCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in floors and finishing to a fine steel trowelled smooth surface without using extra cement complete all as specified and directed.
Material & labour for use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter including fair finished surfaces complete all as specified and directed.
Material & labour for use & waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work, of fair finished surface (Square, rectangular or polygonal) of concrete complete all as specified and directed.
Material & labour for use and waste of formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work of fair finished flat surface of concrete complete all as specified and directed.
Material & labour for use & waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed.
Material & labour for use & waste for formwork to chullah hoods, chajja’s, troughs and similar items including edges of fair finished surface of concrete complete all as specified and directed.
Material & labour for use & waste for form work to edges of concrete flat, treads breaks in floor, window cills, concrete railings, openings in concrete walls, floor and roof and similar work exc 10 cm but not exc 20 cm wide complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in foundations, including rafts, footing, foundation beams, plinth beams, bases for columns etc, basement slab, under-reamed piles and mass concrete etc complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in Beams, cantilevers, bressumers, lintels over 1.5m span etc complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Supply and fixing of mild steel TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Material and labour for mild steel TMT bars, 8mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed.
Material & labour for premium quality coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) etc complete all as specified and directed.
Material and labour for 18 to 20mm thick granite stone of any colour (of any type) work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge etc complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.
Material and labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Material and labour for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed. Note for item No 43 to 44:- NOTES : - (i) The ATT work shall be carriedout through specialised agency as approved by GE in writing and chemical used shall be approved before execution of work. (ii) 5% amount of the total amount of ATT shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
Supply and fixing of vitreous china half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, PVC waste pipe, CP waste fitting, grating and union for discharge pipe with urinal spreader of PTMT any colour complete all as specified and directed.
Supply & fixing of vitreous counter top china wash hand basin of size: 480x380x160mm fixed on to granite surface with all fittings and acessories required including PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc. complete all as specified and directed.
Supply & fixing of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling including 32 mm dia PVC waste pipe etc., complete all as specified and directed.
Supply & fixing of vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.
Supply and fixing of 10 litre capacity virgin polypropylene cistern, white, ISI marked, fixed at low level complete including supply and fixing 45 cm long PVC connection, bend/flush pipe and making all connection etc complete all as specified and directed.
Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings complete to walls or laid in floors/roofs including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supply and fixing of water storage tank of 500 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.
Supply and fixing of PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.
Supply and fixing of PVC connections 60cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.
Supply and fixing of 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floor or in trenches complete all as specified and directed.
Supply and fixing of 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floor or in trenches complete all as specified and directed.
Supply and fixing of 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with stack clamps, 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
Supply and fixing of 110mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing of 75mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door complete all as specified and directed.
Supply and fixing of PVC (SWR) 110 mm to 75 mm dia, reducers complete all as specified and directed.
Supply and fixing of PVC (SWR) branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors complete all as specified and directed.
Supply and fixing of 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing of 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.
Material and labour for salt glazed stoneware gully trap, square or round moulded type 'P', 100x100mm size complete all as specified and directed.
Material and labour for cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.
Material and labour for 150 mm bore, salt glazed stone ware (SGSW) drain pipes confirming to IS 651: 2007 class SP 2, laid to slope in tranches and jointed in cement mortar 1:1 including necessary testing for ensuring leak proofing complete all as specified and directed
Material and labour for PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as specified and directed.
Material and labour for precast RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in manhole covers, including necessary form work etc, set and jointed in CM 1:4 complete etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)
Supply & fixing of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.
Supply and fixing of stop valve 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed. (Note : Weight of stop cock shall not be less than 0.575 Kg)
Supply and fixed of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (Note : Weight of bib tap shall not be less than 0.575 Kg)
Supply and fixed of 15mm, fancy type, chromium plated, long neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.
Supply & fixing of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.
Supply & fixing of solid WPC door frame size (100mm X 65mm single rebate) made from 100% lead free (single extruded process) material with density 780 kg/cbm & manufactured by ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engineer-in-Charge. The door frame should be water proof, termiteproof, fire retardant and having excellent screw holding capacity complete all as specified and directed.
Supply & fixing of 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be water proof,termite rpoof,fire retardent and having screw holding capacity including fixing in frame at site with 03 Nos stainless steel butt hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.
Supply and fixing of 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.
Supply and fixing of chromium plated brass single towel rail 20 mm dia & 600 mm long including a pair of CP brackets fixed with plastic rawl plugs & CP screws complete all as specified and directed
Supply and fixing of two shutter sliding windows made of pre-painted steel and galvanized steel (Base Steel as per. IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for outer frame and 0.58 mm thickness for sliding shutter section, the outer frame for two tracks with grill provision size of 90 mm x 50 mm and the window shutter section of 58 mm x 36 mm and the outer frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminum 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window system at site using anchor fasteners, inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work. (Make: Elixir Metform Pvt Ltd or equivalent as make as approved by GE) complete all as specified and directed.
Supply and fixing of sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed.
Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and as directed.
Material and labour for rendering 15 mm thick on any faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with and including water proofing compond and finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying three coats of white wash on ceiling complete all specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash on wall, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.
Removing surplus excavated material (soil) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
Material and labour for rolling and consolidating formation surfaces by power roller exceeding 8 tonnes and not exceeding 12 tonne complete all as specified and directed.
Material and labour for sand over PCC for cushioning of polythene film complete all as specified and directed.
Material and labour for polythene film, black, 150micron laid in floors complete all as specified and directed.
Material and labour for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per sqcm in field using 400 kg of cement per cum thickness of concrete 25 cm or less complete all as specified and directed. Note:- The contractor shall get the flexural strength slab test carried out from CTL/ IIT/ NIT/ Govt Engineering college. The design mix as carried out above shall be got approved from the Garrison Engineer before using the same in the works and cost thereof shall be deemed to be included under this item.
Material and labour for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ upto 150/200mm thicknes of concrete slab complete all as specified and directed.
Material and labour for forming construction joint 30 mm deep x 10 mm wide filled with sealing compound, Grade ‘B’ etc complete all as specified and directed.
Material and labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ‘B’ etc complete all as specified and directed.
Material and labour for finishing surface by brooming etc complete all as specified and directed.
Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.
Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed. NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast / lugs /SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made
Supply and fixing of factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos stainless steel butt hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in surface channel and drain etc complete all as specified and directed
Material and labour for extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed
Supply and fixing of 20 mm dia gun metal, globe or gate valve with Iron wheel head Screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fixing of 15 mm dia gun metal, globe or gate valve with Iron wheel head Screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fixing of chromium plated shower rose with swivel joints and including fixed to GI tubing 15mm bore size of shower not less than 125mm complete all as specified and directed.
Supply and fixing of factory made steel ventilator with top hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars complete all as specified and directed.
Material and labour for concealed point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25 mm dia with FRLSH accessories, concealed and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch complete all as specified and directed. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
Description all as per item No 111.00 above but for socket out let point 5 Amps on same board complete all as specified and directed.
Description all as per item No 111.00 above but for socket out let point 5 Amps on independent board complete all as specified and directed.
Description all as per srl item No 111.00 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.
Supply and fixing of switch piano 6 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.
Supply and fixing of switch piano 15 Amps flush type one way 230 Volts, 50 Hz, AC supply, ISI Marked, complete all as specified and directed.
Supply and fixing socket outlet 3 pin 5 amps, 230 volts flush type ,ISI Marked, complete all as specified and directed.
Supply and fixing of socket outlet 2 in 1, 6/16 amps, 5 pin 230 volt flush type, ISI marked complete all as specified and directed.
Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.
Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.
Supply and fixing of LED lamp 9 watt suitable for batten holder complete all as specified and directed
Supply and fixing of LED light fitting 1x20W, 220V, AC with integrated aluminium batten with oppel diffuser with and including 20W LED tube light and connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed.
Supply and fixing of surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light complete all as specified and directed
Supply and fixing of bracket for security light made up of 25mm dia, 0.9 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.
Supply and fixing LED security light luminaire 45 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W each and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed.
Supply, installation, testing of SPN distibution board 4 way,double door , IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 Sqmm including all incoming and outgoing connection with proper size of thimble etc complete all as directed and specified.
Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm, green colour for earth continuity conductor and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.
Supply and fixing of heavy duty exhaust fan metallic body 300 mm sweep with and including louvers, electric, single phase 1400RPM, 240 volt 50 Hz complete and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 3 core copper flexible cable of size 23/0.0076 including testing & commissioning after installation at site complete all as specified and directed.
Supply, installation and testing of storage type heater (Geyser) of 25 Litres Capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body. (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years (b) For metal tank 07 years.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls or laid in floors/roofs including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supply and fixing of temperature resistent SS braided pipe suitable to sustaine pressure up to 8 bar not less than 60 Cm long suitable for incoming / out going water connections of Geyser with washer etc. complete all as specified and directed.
Material and labour for earthing and material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed. Note :- (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.
NOTE:- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 of tender documents in pdf form which will be deducted offline while acceptance of tender.
M/S M S BUILDER AND CONTRACTORS
M/S JAISANT CONSTRUCTION CO.
M/s REEDIT CONSTRUCTION
Gupta Enterprises
Ashwani Kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .