Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Work order can be issued to lowest quoted Contractor | |
| 2 | L2₹19.1 L+₹24,177.66 (1.29%)Rejected-AOC | L2 | Rejected-AOC Work order can be issued to lowest quoted Contractor |
Tender Value
₹19 L
EMD Value
₹19,000
Closing Date
19 Mar 2025, 3:00 pmClosed
Commissioner, Madhuranthagam Municipality
Commissioner, Madhuranthagam Municipality
Supply and Fixing of 50th Anniversary Golden Jubilee Arch, lighting installation, Aluminium Door, Air-Conditioner Office chair, Table and Fan to Madhuranthagam Municipal Office
2025_MAWS_533089_1
882/2024/E1
Open Tender
Supply, Erection and Commissioning
Item Rate
Madhuranthagam Municipality
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,000
1 Apr 2025
17 Mar 2025
19 Mar 2025
17 Mar 2025
19 Mar 2025
17 Mar 2025
Amount
Supply & Installation Of Air-Conditioner With Copper Coil 1.5 TR Split Type AC Unit - 5 Star Rated including Loading And Unloading Charges etc.,
Supply & Installation Of Air-Conditioner With Copper Coil 1.0 TR Split Type AC Unit - 5 Star Rated including Loading And Unloading Charges etc.,
Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay including Loading And Unloading Charges etc.,
Supply and Delivery of Name Board including Loading and Unloading charges etc.,
Supply and Delivery of Screen Cloth including Loading and Unloading charges etc.,
Supply and Delivery of Televion 43 inch (TV) including Loading and Unloading charges etc.,
Supplying and Installing Metal Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be place at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look
Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD-50
Supply and fixing of 20 A Flush type Wall Socket 32 A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft
Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
Supplying and fixing in position of alu.Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical membersare spaced at 90cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4 M height the bottom panels should be covered with 12mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass with necessary glassing clips, rubber beading including dismandling holes in RCC columns, beams masonry wherever necessary with the power drill it extended. all the Aluminium must be anodised to 1.5 microns as per spec
Provision for GST 18%
KRISHNAN CONTRACTOR (BID ID -1273303)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_634614.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .