REPAIRS TO CGI SHEET ROOFING VALLY GUTTERS PLASTERING FLOORING AND ROOF TREATMENT TO CERTAIN BUILDING AND SWT TO DEPOT AREA OF COD UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar (like for interlocking tile , kota stone, cuddapa stone and marbles( complete all as directed.

Demolition of wall/ ceiling boards (fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snap grid complete all as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and backing and removing rubbish off the premises etc complete all as directed.

Demolition of concrete ( un reinforced ) of any description and in any position not otherwise specifically provided for

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed.

Dismantling of unserviceable PVC water tank of capacity exc 500 litre and n. exc 1000 litre complete all as specified and directed.

Dismantling of unserviceable PVC water tank of capacity exc 250 litre and n. exc 500 litre complete all as specified and directed.

Disconnecting existing PVC water tanks of capacity exc 250 & not exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc or to facilitate repair work of roof, and hoisting if required reconnecting and re-fixing in position, (cleaning repairing, etc measured separately) all as specified and as directed.

Disconnecting existing unserviceable PVC water tanks of capacity exc 500 & not exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc or to facilitate repair work of roof, and hoisting if required reconnecting and re-fixing in position, (cleaning repairing, etc measured separately) all as specified and as directed.

Dismantling plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

M&L for Brick work with sub class 'B' old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as directed

Ditto- all as per item No 13 above but except bricks

S&F Rolled Sections as in main and croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w (gdeE-250 quality-A) complete all as directed.

M &L for MS work as in wind tie for roof incl securing bolts, hand rails, half round or other stooden hand rail straight portion , posts and struts in fencing including cutting tops to shape as directed etc, flat iron fillets (for securing wire mesh etc) steel section or core for or any other work incl cutting, drilling holes etc complete all as directed.

M&L for MS Plates (plain or chequrred) channels,square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe 410-0 complete all as directed

M&L for mild steel screw bolts (machine made) with hexogonal or square heads at one end & screwed the other or screwed both ends each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt n.exc 5 cm long, diameter of shank 11 mm to 15mm complete all as directed.

M & L for mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not exceeding 30cm long of dia of neck in mm exc 12 and not exc 20mm complete all as directed.

M & L for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc, grade of zinc coating 275,etc complete.

M&L for 0.80mm thick plain, galvanised mild steel sheeting, in ridges,hips, valley gutters drip and straight flashings (length and girth as fixed) , grade of zinc coating 275 complete all as directed.

M & L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified etc complete.

M & L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified etc complete.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each.

Ditto all as per item no 25 above but n.exc 1.5 Sqm each.

Taking down shutter of any description not exc. 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description exc. 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F factory made 35mm thick plain, framed, panelled shutters (two panels), with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003(Part I), kiln seasoned and chemically pressure treated,with second class hard wood rail and style.complete all as specified and directed.

S & F 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.24 (a) and fitted to chowkhats complete all as specified.

S&F factory made 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded incl 12mm Square guard bars complete all as specified and as directed.

S&F steel windows or ventilators, fixed type , with glazing bars complete

S&F steel door including projecting type hinges, steel handle complete with glazing bars, dovetailed or welded complete all as specified

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement concrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick complete all as directed.

Taking down Old Aluminium Door & windows with frame and shutters, of any size of opening each and removing to stores complete all as directed.

S&F aluminum powder coated window shutter sliding type two track with or without sash bars, of aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles and 4 mm thick sheet glass ordinary quality fixed to aluminium frame complete all as directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stanless steel wire staples complete all as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone , concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified

Hacking out old broken glass (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified

S&F 3.0 mm th sheet glass ordinary quality, plain, and glazing with oil putty or wooden beads in square n'exc .5 sqm in each pane complete all as directed.

S&F 5.0 mm th sheet glass ordinary quality, plain, and glazing with oil putty or wooden beads in square exc .5 sqm in each pane complete all as directed.

S & F 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F in repairs 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F in repairs 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F in repairs 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

M&L for Machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade laid over and including cement screed base 15 mm thick in CM 1:6 complete all as specified.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed base 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

M&L for Non-skid coloured Ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 67 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M&L for vitrified coloured tiles 10mm thick (square/rectangular) polished area of each tile exc.0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as directed.

Ditto all as per item No 69 above but on skirting over and including 10 mm th rendering in CM 1:4 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F rotational moulded polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F in repairs Ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass furrule bore of pipe 15 mm dia complete all as specified.

S & F in repairs Ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections,bore of pipe 15mm complete all as directed.

All as per item No. 76 above but bore of pipe 20mm complete all as directed.

M&L for GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm complete all as directed.

All as per item No. 78 above but bore of pipe 20mm complete all as directed.

S&F in repair stop valves fancy type cast copper alloy with capstain heads screwed down, high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe complete all as directed.

S&F in repairs bib taps cast copper alloy with capstain heads,screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as directed.

S & F in repairs pillar taps fancy type ,chromium plated with capstain heads screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as directed.

S & F in repairs Brass cromium plated shower rose of 125 mm dia complete all as specified.

S&F In repairs Grating round 140 mm size of PTMT (Minimum weight 50gms.) complete all as directed

S& F stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including providing and fixing cantilever brackets and connecting union to waste pipe; complete all as specified.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as directed.

S&F in repairs PVC low/high level flushing cistern, white, 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets) complete all as directed.

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated hinging deivce complete all as directed.

S&F in repair vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as directed.

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod with brackets complete all as specified and directed.

M&L for100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded aggregate in sub base complete all as directed.

M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair complete all as directed.

M&L for cement concrete 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed complete all as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as directed.

Taking down cement plaster of any description of brick or stone wall etc incl raking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as directed.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as directed.

M&L for preparation of new surfaces plastered surfaces & applying two coats of oil emulsion distemper on walls complete all as directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (40 mm graded stone aggregate ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over and including 30mm thick sand layer spreading all as specified and as directed.

M& L Chequered Cement Concrete Tiles 20 CM x 20 CM X 25 mm thick set and jointed in cement slurry and pointed in grey cement & pigment in floors over and including screed bed 15 mm thick in CM 1:6 .complete all as specified.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

Taking down existing water proofing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down to remove dust etc.complete and applying/brushing the cleaned surface with neat cement slurry 3 Kg per Sqm complete.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound @ 3% by weight of cement including filling depressions if any, to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as directed.

Supply only integral water proofing compound.

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under :- (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction.

M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregate lacing coarse at junctions of roof and parpet wall etc all as specified and directed.

AVS CONSTRUCTION

H S TAKHI

RAMESH PATIL

S RESHAMSINGH AND SONS

M/S B.A. GAIKWAD

Santhi Enterprises

M/S SANDEEP H BHINGARDIVE