Renovation of Audit office, GCDA Kadavanthra

Amount

Renovation of Audit office GCDA kadavanthra

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

od83016/2022_2023 : Providing modular partition of 60mm thick 120mm height frame work of 16 swg CRCA steel, 2way, 3way, 4way connectors, 2mm thick Aluminium trim, both side laminated pre-laminated particle board of 9mm thick, self breathing Polyster cloth 290 gsm necessary glue (Polygel- SPFM), race ways with 16swg CRCA steel, level adjusters, PVC injuction moulded joineries like radius cap, End cap, Trim Catcher etc. Including all cost for CNC (Computerised Numerical Controlled) punching and bending welding, grinding, power coating, fabric clading, installation, conveyance etc. All complete.(Godrej /feather lite /metafab or equivalent make)

od86890/2022_2023 : Providing Table Top with 25mm thick melamine faced pre laminated pre lam board both sides cantilever and table supports with 14 SWG (CRCA steel),PVC Edge bending tape 2.00mm thick of approved brand,necessary glue(Hot melt gum130cel), PVC injuction moulded 60mm dia gromet. Including all cost of labour for CNC cutting of bending grinding ,sanding lipping the edge,powder coatinginstallation, conveyence etc all complete.(Godrej/feather/metafab or equivant make.)

od86909/2022_2023 : Providing gable ends with 25mm thick melamine faced pre laminated board both sides 2 gable made of 14 SWG (CRCA steel), level adjusters m8x25,PVC edge bend 2x30 self tapping screws etc, Including all cost of labour for CNC punching ,bending ,lipping cutting and grinding the edge bend installation, conveyence etc all complete.

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

9.1.3 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated Hollock wood

9.20.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.24.1 : Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded ) (overall area of door shutter to be measured):Rectangular or square

9.140.1 : Providing and fixing plain lining with necessary screws/nuts/& bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge ( Frame work shall be paid for separately)12 mm thick commercial ply conforming to IS: 1328 BWR type

9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick

9.105.2 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I

10.30.2 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :5.5 mm thick glass panes

10.30.1 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :4.0 mm thick glass panes

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

od89898/2022_2023 : Providing and fixing cup-board shelves with 18mm pre-laminated flat pressed 3 layer (medium density) particle board with one side decorate & other side balancing laminates, exterior grade with top 25mm thick melamine faced pre-laminated board, drawer slides of bottom mounted channel, shutter fixed with SS piano hinge, PVC edge banding tape 2.00mm thick etc. with necessary fixing arrangements and screws including all cost for labour, cutting, grinding, lipping the edge, installation, conveyance etc. all complete as per the directions of engineers in charge(Godrej/feather/metafab or equivalent make)

od89902/2022_2023 : Providing and fixing cup-board shelves with 18 mm pre-laminated flat pressed 3 layer (medium density) particle board with one side decorate & other side balancing laminates, exterior grade with top 25 mm thick melamine faced pre-laminated board, shutter fixed with SS piano hinge, PVC edge banding tape 2.00 mm thick etc. with necessary fixing arrangements and screws including all cost for labour, cutting, grinding, lipping the edge, installation, conveyance etc. all complete as per the directions of engineers in charge.(Godrej/featherlite/metafab or equivalent make.)

od90328/2022_2023 : Providing and fixing cup-board shelves with 18 mm pre-laminated flat pressed 3 layer (medium density) particle board with one side decorate & other side balancing laminates, exterior grade with, shutter fixed with SS piano hinge, PVC edge banding tape 2.00 mm thick etc. with necessary fixing arrangements and screws including all cost for labour, cutting, grinding, lipping the edge, installation, conveyance etc. all complete as per the directions of engineers in charge.(Godrej/featherlite/Metafab or equivalent make)

od90373/2022_2023 : Providing foot-rest ( 60 x 30 x 15 cm) made of 18 mm pre-laminated flat pressed 3 layer (medium density) particle board with PVC edge bending tap 2.00 mm thick etc. including all cost of labour and materials etc all complete.

9.90.2 : Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm

9.92.2 : Providing and fixing chromium plated brass handles with necessary screws etc. complete:100 mm

od90424/2022_2023 : Providing and fixing multi drawer lock (front mounting) consisting of metallic lever of 480mm length ,front mounting lock and multidrawer lock bracelets with other necessary fittings of approved quality etc all complete

od90847/2022_2023 : Providing and fixing key-board tray (65 x 30 cm) made of High Impact Plastic (HIP) Telescopic channel etc. all complete.

9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

8.27.1 : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.Kiln seasoned and chemically treated hollock wood

od90901/2022_2023 : Providing and fixing CPU Trolley metallic, knocked down with adjustable type with casters etc. all complete.

od92169/2022_2023 : Zebra Blinds consisting best quality fabric with pelmet and manually operated chain mechanism. The fabric shall have properties such as antifungal and antimicrobaia, sheer fabric shall allow in maximum amount of flight (20% to 100% light transmission). Blackout fabric shall completely blackout sunlight for complete privacy, room darkening, temperature regulation (0% light transmission). The blinds having mounting brackets, pelmet, sealing bracket, 38 mm roller tube aluminium extrusion, power coated aluminium tube and U bottom and its necessary plastic end caps.

od91706/2022_2023 : Providing and fixing plaster of paris (POP) moulded cornice beeding around the false celing etc all complete

od90972/2022_2023 : Providing H back chair, upholstay with art leather, PU Arm rest, tilt, gas lift ,nylon base base synthetic etc. all complete.

od91011/2022_2023 : Providing H back chair, mesh back ,cushioned seat, PU arm rests, Gas lift, tilt with nylon base and head rest etc. all complete.

od91018/2022_2023 : Providing chair back revolving,cushioned seat,mesh back ,gas lift and nylon base etc. all complete

od91056/2022_2023 : Providing M back revolving chair, cushioned seat,mesh back,gas lift and nylon base etc. all complete.

od91109/2022_2023 : Providing visitors chair with seat and back cushion, with out arm , fixed frame etc.

17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

17.28.2.1 : Flexible pipe32 mm dia

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

17.20.1 : Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

14.82 : Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

O P ENTERPRISES

Bidder Name

O P ENTERPRISES

S Pareed