Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹21.2 L+₹3.4 L (19.1%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹21.6 L+₹3.8 L (21.3%)Rejected-Finance | L3 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG NP 154 (UNIT MI ROOM) ZONE A AHMEDABAD
2022_MES_546158_1
8281/E8
Open Tender
Civil Works
Works
210 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹41,000
Yes
27 Sept 2022
18 Aug 2022
9 Sept 2022
18 Aug 2022
7 Sept 2022
24 Aug 2022
18 Aug 2022 - 24 Aug 2022
Amount
Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete.
Demilition of cement concrete of any description and in any position not otherwise specially provided for complete
Dismantling timber scantling 40Sqcm and over in section in any position in framed work as in rafters complete,
Dismantling wrought iron or mild steel work of any description not oth-erwise provided for complete.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete
Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete.
Dismantling wall and ceiling boards any thickness including cover fillets complete.
Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia of pipe in 100mm complete
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
S&F factory made 50mm thk precast RCC 1:11/2:3 type A0 man hole cover of Size 1200mm x 300mm complete
S&F factory made 50mm thk precast precast RCC 1:11/2:3 type A0 man hole cover of Size 600mm x 300mm complete
M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc, finished even and smooth using extra cement incl necessary form work complete
Supply only integral water proofing compound complete
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.
M&L for Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth on Brick walls complete.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.
S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, S&F in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete.
S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete.
S&F Stainless steel butt hinges medium weight 100mm long complete.
M&L for 150mm long extructed aluminium handle fabricated type complete.
S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.
S&F in repairs 25 mm dia fancy type drapary curtain rods with and including suitable fancy type brackets to both ends as required fixed in repair complete all as spd and directed.
S&F in repair tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete.
S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks, desert cooler stands and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe-290 (Gde E- 165) complete.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165) complete.
Dismantling and Refixing of mild rolled steel straps in joist, angle, channel as in purlins, rafters cleats, ceiling frame etc conforming to fe410 w complete
S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board 4mm thick of size 595 x 595 mm fixing with screws/clips all as per manufacturers instructions and direction complete.
S&F aluminium anodised powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and one portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary opening for exhaust fan if reqd and necessary channel frame work with rubber gasket and aluminium beading etc complete.
S&F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and 3 track sliding shutters duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
M&L aluminium decorative grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete.
S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete. (Note : Corrugation shape and colour of sheet shall be as approved)
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete
M&L factory machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.
M&L factory machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.
M&L PCC type C-2 Mix 1:3:6 (40mm graded stone aggregate), 75mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete.
M&L for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in levelling course complete.
Roughening surface of old concrete / terrazo floor by peecking sweeping clean and washing down with water to remove dust etc. complete.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM 1:4 complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall complete.
M&L Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface even & smooth with out using extra cement complete.(WPC measured and paid separately).
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with white wall care putty and a coat of primer complete.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint over one coat of Primer on walls complete.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1.5mm average thick wall care putty with Priming plastered and other surfaces with alkali resistant priming paint walls complete.
M&L for complete removal of existing treatment and applying two coats cement based paint on over one coat of primer on walls complete.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.
M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete.
Taking up or down of 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.
Taking up or down of 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.
S&F 15mm bore tubes `medium grade' galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.
S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.
S&F in repair low density polyethylene pipes (LDPE) of pressure rating 6kg/sqcm pipe 50mm bore in any length laid in trenches or floor complete.
Dismantling of water tanks exc 500 & n exc 1000 ltr capacity & removing to store complete.
S&F rotational moulded PVC water storage tank cylinderical, vertical with closed top of 1000 ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete.
S&F in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete.
S&F in repair Pillar taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete.
S&F in repair stop cock 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete.
S&F in repair stop cock 15mm (Concealed type) cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete.
S&F in repair PVC connection 600mm long of dia 15mm complete complete.
S&F in repair 75 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete.
S&F in repair 110 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete.
M&L in repairs PVC(SWR) bends 75 mm(any radius), diminishing pieces or tapers (larger bore measured) complete
M&L in repairs PVC(SWR) bends 110 mm(any radius), diminishing pieces or tapers (larger bore measured) complete
M&L in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete
M&L in repair PVC ( SWR) gully trap 125/110 mm setting and jointing with solvent cement complete
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets & cutting for pinning in ends of bracketes or erecting stand, waste pipe complete.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete
S&F in repairs 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete
S&F in repair Water Closet ( Squatt pattern) Orissa pattern size 580 mm x 440mm, white, with 'P' or 'S' integral foot rest complete including provision of PCC 1:5:10 bedding complete.
S&F in repair 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete.
S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX100mm complete.
S&F in repairs 125mm size brass chromium plated shower rose fixing with 15mm dia pipe complete.
Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 82 above but for One fan point controlled by one switch.
All as per Item No 82 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 82 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 82 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting up complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
M&L in repairs submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth continuity conductor complete.
M&L in repairs submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.
M&L in repairs earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in repairs MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F in repairs MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F in repairs MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-
S&F in repairs MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F in repairs MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
S&F in repairs MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete.
S&F Exhaust fan single phase, 230 volts, 250 mm sweep metal body with mounting rings complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections & similar to Bajaj cat Ref no. BCLST 20 W LED code 169829 complete
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete.
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
S&F in replacement energy efficient recessed mounted LED luminaire 36 Watt suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required & similar to cat no LCTLRN-36CDL of crompton make complete
S&F water heater 50 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete and with all fitting and fixing accessories including PVC pipe connection complete Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete.
Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.
Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
Horizontal boring holes in soil for road crossing and getting out and disposal of spoil to a distance n exc. 50 m for a pipe of dia 40 mm in size complete.
DMA PROJECTS
r s corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .