Construction of Health Sub Centre building at Mohli in Tehsil Fatehpur, Distt. Kangra (H.P.)

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil conditions upto any depth and lift including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation with in all leads and lifts as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth as per the entire satisfaction and direction of the Engineer -in -Charge including carriage of material with in all leads lifts and other incidentals. The rate includes octroi, sale tax, malkhana, G.S.T. and all other of taxes as imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering or pumping and bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including cleaning of slush which may arise during dewatering and dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate includes royality charges, octroi, sale tax, malkhana, G.S.T. and all other of taxes as imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and filling brick bats/crushed stone aggregate 40mm (forty milimeter) nominal size in soakage pit as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete including carriage of materials within all leads, lifts and other incidental. The rate including Royality charges, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads, lifts and other incidental. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars, post and struts (square, rectangular or polygonal in plan in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads, lifts and other incidental. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads. lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchings, cantilevers,girders bressumers and lintels upto any heights/depths / thickness upto all floor level including carriage of materials within all leads, lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width etcetera upto all floor level including carriage of materials within all leads, lifts and other incidentals. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads, lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size) vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement isto six sand isto twelve graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size) vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing , design, specification, entire satisfaction and direction of Engineer in charge. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement : one and half sand : three graded/ crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings bases of columns and the like and mass concrete including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement : one and half sand : three graded/ crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports, balconies,beams,girders, bressumers and cantilivers in all depths/ thickness upto all floor level including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement : one and half sand : three graded/ crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in coulmns, pillars, posts, and struts in all depth/thickness upto all floor level including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement : one and half sand : three graded/ crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair cases) excluding landing but including preparing the top surface and finishing of nosing upto all floor level and carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement : two sand : four graded/crushed stone aggregate 20mm(Twenty milimeter)nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-Twenty) in chajjas of any thickness upto all floor level including finishing the exposed surface with cement mortor 1:3(1 cement isto three sand ) to give a smooth and even surface including form work and curing complete excluding the cost of reinforcement upto all floor level including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, lifts other incidental charges as per approved drawings , design, specification, entire satisfaction or as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other of taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, basis of columns and the like and mass concrete in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, lifts other incidental charges as per approved drawings , design, and specification, entire satisfaction or directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0.10 m ( zero point one zero meter ) thickness including attached pilasters, buttresses, plinth and string courses etcetera and the like from top of foundation upto all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement isto three sand) complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Boulder filling tightly hand packed with hard stone under floors as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying Mild/Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding straightening and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering including racking out joints in cement mortar 1:5 (One cement isto five sand) as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in Mud Mortor including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm (forty centimetre into nineteen centimetre into twenty centimetre) including quion block jamb blocks and closer etcetra made of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) laid with cement mortar 1:6 (one cement isto six sand) including curing complete in super structure upto all floor level as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying precast concrete block masonry in partition walls 10cm (ten centimetre) thick with solid block of approved size including quoin block jamb blocks and closers etcetera made of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size and down gauge) laid with cement mortar 1:6 (one cement isto six sand) in super structure above plinth level upto all floor level as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing Factory made ISI marked No.IS:1003 40mm (forty millimetres) thick flush door shutters interior grade, commercial type, core of block-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick commercial Board water proof shutters for cup boards including fixing with nickel plated bright finished piano hinges with necessary screws etcetera complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawing, desing, specification, entire satisfaction and direction of Engineer in charge . The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing cabinet work made of 19mm (nineteen millimeter) thick water proof termite resistant commercial board box including vertical partitions shelves and shutters, frame of first class hard wood and 6mm (six millimetre) thick hard wood edging back side of cup-board/cabinets shall be of 8mm (eight millimeter) thick ply the shutter from outsides shall be finished with 1.00mm (one millimeter) thick lamination of approved shade complete including nickel plated bright/finished piano hinges and 65x35mm (sixty five millimetres into thirty five millimetres) brass cup board lock complete as per design/Architectural drawings as per HPPWD specification or as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood pannelled glazed or pannelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts and other incidental charges as per approved drawing desing, specification, entire satisfaction and direction of Engineer in charge . The rate including royality charges, malkhana, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge using galvanized Mild steel wire gauge of I.S.gauge designation 85-G ( eighty five-G )with wire of diameter 0.56mm (zero point five six millimeters)for doors, windows, and clerestory windows including bright finished / black enamelled iron butt hinges with necessary screws as per specification, approved drawing, design entire satisfaction and direction of the Engineer-in-charge including carriage of material with in all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeter) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimeter) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter) anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter) anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental. as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimetres) special quality bright finished brass cup board locks or wardrobe locks of Indian make of approved quality with six levers including necessary screws etcetera. complete and carriage of material with in all leads, lifts and other incidentl as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S. double acting spring hinges with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 200mm (two hundred millimeters) size oxidized mild steel hooks and eyes with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing oxidized mild steel fan light catchwith necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 8mm (eight millimetres) thick cement bonded partical board ceiling of approved quality with butt jointing and nail (frame work and coverfillets to be paid for separately) including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 12mm (Twelve millimeters) thick and 150mm (One hundred fifty milimeters) wide first class deodar wood pelmet with 25mm (twenty five millimetres) diameter wooden curtain rods and brackets including fixing with 25x3mm (Twenty five into three millimetres) MS flat 10cm (Ten centimeters) long and plugs and necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) plain grills of required patterns in wooden/angle iron/structural steel frames of windows etcetra with M.S. (Mild steel) Flats, square or round bars with round headed bolts and nuts or by screw including welding with frames complete in all respect and carriage of material within all leads, lifts and other incidental charges as per approved drawing desing, specification entire satisfaction, and direction of Engineer in charge . The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazzo tiles ISI marked number IS-1237 of approved brand /make (NTC/GTC make) and of approved shade 20mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of medium shade. upto all floor level including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing automatic hydralically compressed and polished precast terrazo tiles of ISI marked No.IS-1237 of approved shade 20mm (twenty millimeter) thick with marble chips of specified sizes in skirting, risers of steps and dado upto any height on 10 mm(ten millimetre) thick cement plaster 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of medium shades in all respect including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying upto all floor level White glazed tiles 300x450mm (three hundred into four hundred fifty millimeter) size and 6mm (six millimeters) thick of approved brand and make (Kajaria/Nitco/Naveen tiles) in skirting, risers of steps and dado for all heights, on 12mm (twelve millimeters) thick cement plaster 1:3 (one cement is to three sand) and jointed with white cement slurry complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mixed mechanically laid in one layer finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

15mm (fifteen millimetre) thick cement plaster skirting or dado upto any height with cement morter 1:3 (1 cement isto three sand) finished with a floating coat of neat cement including rounding of junction with floorand curing complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, malkhana, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick White Makrana marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one white cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per specifications, approved drawing and design, entire satisfaction and as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including royality charges, malkhana, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster(RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of back coat of polyster of 5 (five) microns over 5 (five ) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diameter and prepainted galvanised iron limpet and bitumen washer complete with all accessories as required as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing velley 60cm (sixty centimeters) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diameter with prepainted galvanised iron limpet and bitumen washer complete with all accessories as required as per the direction of the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetres) thick plain galvanised iron sheet 15cm (Fifteen centimeters) wide 45cm (Forty five centimetres) overall semicircular plain G.I. (Galvanised iron) sheet gutter with iron brackets 40x3mm (Forty into three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete and carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and Fixing on wall faces 100mm (one hundred millimeter) diameter P.V.C. polyvinyl chloride rain water pipe of Supreme /Finolex having working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete and carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast) or its equivalent accessories for rain water pipes of Supreme / Finolex including filling the joints with approved adhesive complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. P.V.C. plain bend 100mm (one hundred millimetre)diameter.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast) or its equivalent accessories for rain water pipes of Supreme /Finolex including filling the joints with approved adhesive complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. P.V.C. plain shoe 100mm (one hundred millimetre)diameter.

Providing and fixing M,S. (Mild steel) BP (Black plain) sheet 1.66mm to 2mm (one point six six milimetres to two milimetres) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat with connecting plates or angle cleats etcetra as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, and carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. (a) in gratings, framed guard bars, ladders, railings , brackets and similar works ,ceiling frames etcetra.

Steel work welded in built up sections, trusses and framed work, composed of beams, joists, channel, angles, tees, flats with connecting plates or angle cleats extectra as in trusses and trussed purlins, main and cross beams, hip and jack rafters purlins connected to common rafter and the like in building including cutting,fixing ,liftings, hoisting and placing in position complete and applying a priming coat of red lead paint complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. (b) in trusses and trussed purlins in buildings.

Providing and fixing M.S. (Mild steel) round holding down or anchor bolts with nuts and washer plates complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing factory made double steel shutters window side hung ( one glazed and other wire gauged ) including frame of channel ISLC-75 (seventy five) flaped with MS flat 75x4 mm ( seventy five into four millimetres ) and 50x4mm ( fifty into four millitres ) with opening side of channel to make multi frame and shutter of rolled steel Z-section , T- section and T- hinges , handles with closing device and making provision of fixing of windows where required with 16x3.15mm ( sixteen into three decimal one five millimetres ) lungs 10cm ( ten centimetre ) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeter) of cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) or with wooden/steel plugs and screws or rawl plugs and screw or with bolts and nuts as required and iron fittings , including providing and fixing of handle and haps and staples etcetra. and fixing 4mm(four millimeter) thick glass panes with glazing clips and special metal sash putty of pproved make for glazed side of shutter and wire gauge of IS gauge designation 85-G ( eighty five-G) with wire of diameter 0.56mm ( zero decimal five six millimeter) and for fixing wire mesh with M.S. flat 20x3mm ( twenty into three millimters )for metal beading and screws and applying a coat of approved steel primer after pretreatment of the surface as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. Fixed steel windows

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints. mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. Top hung Ventilators.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm ( twenty five into twenty five into five millimetres ) thickness including hinges, jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm( twenty five into twenty five millimetre ) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm ( two decimal five millimetres ) thick with a provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild Steel) fan clamps type-I of 16mm (sixteen millimetre) diameter M.S. bars bent to shape with hooked ends in R.C.C. (reinforced cement concrete) slab during laying including painting the exposed portion of loop all as per standard design complete as per specifications approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing angle iron door, windows, clerestory windows frame ( Single Rebate ) manufactured from M.S. angle iron section of 40x40x6mm ( forty into forty into six millimetres ) thickness and M.S. flat 50x5mm ( fifty into five millimetres ) in combination welded together to make one frame as per design and drawing including hinges. Jamb .lock jamb ,beed and if required angles thrashold of mild steel angle 50x25mm ( fifty into twenty five millimetres ) welded or rigidly fixed by mechnically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimetres ) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing angle iron door, windows clerestory windows frame ( Double Rebate ) manufactured from M.S. angle iron section of 40x40x6mm ( forty into forty into six millimetres ) thickness and M.S. flat 50x6mm ( fifty into six millimetres ) and M.S. flat 25x6mm (twenty five into six millimetres) in combination welded together to make one frame as per design and drawing including hinges. Jamb .lock jamb ,beed and if required angles thrashold of mild steel angle 50x25mm ( fifty into twenty five millimetres ) welded or rigidly fixed by mechnically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimetres ) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing Railing for stair case having baluster of 19x19mm (nineteen into nineteen millimeter) M.S. (Mild steel) solid square bar with a clear height of 85 cm (eighty five centimeter) and 60 cm (sixty centimeter) centre to centre embedded in cement concrete steps and welded with electric gas welding at top alongwith hand rail of hollow mild steel rectangular pipe of 60x40mm (sixty into forty millimetre) (ISG-16) (ISG-sixteen) Vertical balluster welded or jointed with each other with two rows of mild steel flat 50x5mm (fifty into five millimeter) as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, malkhana, G.S.T. and all other taxes as imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foregin matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, red oxide/zinc oxide chrome steel primer of approved brand and manufacture (Narolac/Asian paints) complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint other than white of approved brand and manufacture and of approved shade brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foregin matter, sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat ) on new wood and wood based surfaces, with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with readymixed paint other then white omplete as per specifications, approved drawings, design,entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Applying priming coat on new concrete/masonry/asbestos cement/ pastered surfaces after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with Readymixed primer as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Applying birla white wall care putty (two coats) over plastered surfaces after thoroughly brushing the surface free from mortar drops, dirt, dust, loose material and other foreign matters, sand papered smooth to give final matter finish to the surface complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Wall painting (two or more coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3(one cement isto three sand) upto all floor level and curing complete including carriage of materials with in all leads, lifts and other incidental as per specifications approved drawings, design,entire satisfaction, and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 3 ( one cement isto three sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

White washing with lime on undecorated wall surfaces ceiling or sloping roofs ( two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar, drops and other foreign matter upto all floor level as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved shade (Apexultima) of Asian paints/Nerolac paints on undecorated wall surfaces (two or more coats) to give an even shade and final finish after thoroughly cleaning / brushing the surfaces to remove all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces smooth complete upto all floor level as per specifications approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/broken/ crushed stone aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing plinth protection 50mm ( fifty millimeters) thick in cement concrete 1:3:6 ( one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters ) nominal size and curing complete including finishing the top surface of concrete smooth complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Constructing 15x22cm ( Fifteen into twenty two centimetre) U-shape open surface drain with square rubble stone masonary wall in cement mortar 1:6 (one cement: six sand ) and inside plastering with cement mortar 1:3 (one cement: three sand) including earth work and laying ten centimetre cement concrete bed in 1:5:10 (one cement : five sand : ten graded crushed stone aggregate of 40mm (forty milliemeter) nominal size) and 7.5cm (Seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size)at bottom joint of drain and finished with a floating coat of neat cement complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL make) complete (Earth work in trenches to be measured and paid for separately) as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing to wall, ceiling and floor ISI marked 20mm (twenty millimeter) nominal bore mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor as per specifications approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing to wall, ceiling and floor ISI marked 15mm (fifteen millimeter) nominal bore mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) nominal bore/diameter P.V.C (Poly vinyal chloride) ISI marked plain bend of Supreme/Fnolex/Prince for Sewerage pipe confirm to IS No.14735-99 (fourteen thousand seven hundred thirty five- ninety nine) including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidentals as per specificiation, approved drawing, design, entire satisfaction and direction of the Engineer- in-charge. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing P.V.C. tee 100mm (one hundred millimeter)diameter ISI marked including fixing with approved adhesive etcetera complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) nominal diameter sand cast iron/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal diameter sand cast iron/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately as per specifications. approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter, cast iron Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 100mmx100mmx100mm (one hundred millimeters into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) diameter, cast iron Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 100mmx100mmx100mm (one hundred millimeters into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing sand cast iron/cast iron spun fitting and accessories (a) bends or required degree (any radius) with oval access door insertion rubber washer 2mm (two millimeter) thick bolts and nuts complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government. 75mm (seventy five millimeter) nominal size

Providing and fixing sand cast iron/cast iron spun fitting and accessories (a) bends of required degree (any radius) plain complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government. 75mm (seventy five millimeter) nominal size

Providing and fixing sand cast iron/cast iron spun fitting and accessories (a) bends or required degree (any radius) plain complete as per specifications approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government. 100mm (one hundred millimeter) nominal size

Providing and fixing 100mm (one hundred millimeter) nominal diameter cast iron cowl as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size/ diameter M.S. stay and clamps for sand cast iron/cast (spun) iron pipes as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked 75mm (seventy five millimetre) nominal diameter cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors complete as per specifications, approved drawings, design, entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked big size No. 2071 ( two thousand seventy one) of Cera / Hindware in white colour Orrissa Pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580 x 440mm (five hundred eighty into four hundred forty millimeter) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) . as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm (One hundred millimeter) size "P" or "S" trap for water closet (squatting pan) including jonting the trap with pan and soil pipe in cement mortar 1:1 ( one cement : one sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, G.S.T. or any other taxes imposed by the Government.

Providing and fixing PTMT Coloured / white high density Polyethylene / poly propylene 10 litres (ten litres) capacity ( full flush) European standard control low level flushing cistern with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal (fifteen millimeter) nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm (forty millimeter) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing flat back 630mmx450mm (six hundred thirty into four hundred fifty millimeter) vitreous china wash basin ISI marked of hindware/cera with single hole for pillar tap with C.I. (Cast Iron) or M.S. (mild steel) bracket painted white including cutting holes and making good the same but excluding fittings as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing stainless steel wash basin 550x400mm (five hundred fifty into four hundred millimeters) diamond model code No.WB-2116 with single hole for pillar tap complete with C.I. (cast iron) or M.S. (mild steel) brackets painted white including cutting holes and making good the same as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge and carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 610 x460 mm (six hundred ten into four hundred sixty millimeters) with bowl depth 200 mm. (two hundred millimeters) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. (cast iron) or M.S. (mild steel) brackets painted white including cutting holes and making good the same but excluding fitting as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter C.P. brass waste for wash basin or sink as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) diameter sand cast iron grating for gully, floor or Nahni trap as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P.(chromium plated brass screws and washers complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P.( chromium plated) brass towel rail of approved brand and manufacture (HINDWARE/CERAMAKE) complete with C.P.(chromium plated) brass brackets fixed to wooden plugs with C.P. brass screws complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P.(chromium plated) brass bracket fixed to wooden cleats with C.P. brass screws complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) diameter C.P. (chromium plates) brass shower rose with 15mm (fifteen millimeters) or 20mm (twenty millimeters) inlet as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass bib tap with capstan head as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass pillar tap with capstan head as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter Brass stop cocks of Prayag/Hindware/cera as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked PVC connection pipe with brass union 45 cm. (forty five centimeter) long and 15mm (fifteen millimeter) noiminal bore complete as per specifiation, approved drawing, design,entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing PVC water storage tank of ISI : 12701 marked of 1000 (one thousand ) litre capacity with G.I. inlet and outlet connection with fittings and mosquito proof 15mm (fifteeen millimeter) nominal bore ball valve with polythene float and mosquito proof PVC cover with locking arrangement including hoisting upto all heights complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Constructing manhole with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (Twenty millimeter) nominal size) mix foundation concrete 1:4:8 (one cement; four sand, eight graded stone aggregate 40mm (forty millimeter) nominal size) in side plastering 15mm (fifteen millimeter ) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. i) Inside size 800x800 mm (eight hundred into eight hundred millimeter) and upto any depth including C.I. cover with frame (light duty single seal patern-I) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal diamensions, total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) ( weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15kgs.(fifteen kilogramme) with 200mm (two hundred millimeter) thick walls of brick masonary using second class common burnt clay building bricks of approved quality in cement mortor 1:3 ( 1 cement : 3 sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

DILRAJ SINGH

Joginder Singh