Construction of shopping complex under Guruvayur Devaswom Fire security system

Amount

FIRE PUMP ROOM EQUIPMENT

MAIN PUMP : Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered (2280 lpm at 75 m Head)

DIESEL ENGINE DRIVEN PUMP:- Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel DrivenPump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. (2280 lpm at 75 m Head) Make : Kirlosker/Lubi/Mather & Platt)

MAIN PUMP : Supplying, installation, testing and commissioning of Electric driven Fire service sprinkler pump Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered (2280 lpm at 75 m Head)

JOCKEY PUMP:Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. (180 lpm at 75 m Head)

Supplying installing, testing, perfect aligning and proper levelling and commissioning of BOOSTER PUMP of 900 LPM at 35/40 mtr head of 1500 RPM single stage with Bronze working parts (EN-8) (C-40) and directly coupled to H.P motor, ' B ' class insulation squirrel cage induction motor working on 3 ph. 440 A.C. Both Pump & Motor are to be mounted on common box plate along with suitable rigid foundation, nut bolts, with coupling guards and antivibration rubber pads in an approved manner. (MAKE: Mather Platt/Kirloskar /Lubi/Flowmore)

Supply, installation, testing and commissioning of combined control panel with DOL starter for the electrical motor main pump set,Diesel driven pump,Electrical motor Sprinkler pump (including water curtain and building sprinkler), Jockey pump set, & Booster pump complete with isolator switch, volt meter, ammeter manual/auto mode switch,programable logic control etc., complete. All the components shall be housed in a common cubical made of 14/16 swg. M.S. sheet with required stiffness. The panel should be powder coated of red color both inside & out side. The panel should be compartmentalized with hinged lockable doors of dust and pest proof. The panel shall have both bottom & top cable entry provisions and shall be of foot mounted type with 150 mm pedestals or wall mounted type. There should be inter connection, having switchgears, accessories mount, internal wiring, earth terminals, numbering, etc complete in all respect, suitable for operation on 3 phase 415 volt 50 cycle AC supply with enclosure protection class IP 42. All the above shall be accordance with state / local electrical inspectorate / AHJ standard and specifications. (Panel for 1 Sprinkler Main +1 Hydrant Main +1 Engine+2 Jockey+2 booster)

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms,making good the damages,colour washing etc. as required (Make: Finolex, Havells, RR) 11kv grade 3.5 core x 240 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms,making good the damages,colour washing etc. as required (Make: Finolex, Havells, RR) 11kv grade 3.5 core x 70 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms,making good the damages,colour washing etc. as required (Make: Finolex, Havells, RR) 11kv grade 4 core x 16 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms,making good the damages,colour washing etc. as required (Make: Finolex, Havells, RR) 11kv grade 4 core x 10 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required (Make: Finolex, Havells, RR) 11kv grade 3.5 core x 70 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required (Make: Finolex, Havells, RR) 11kv grade 4 core x 16 sq mm aluminium cable

Supplying, laying, and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1kV grade of following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required (Make: Finolex, Havells, RR) 11kv grade 4 core x 10 sq mm aluminium cable

Supplying and drawing following sizes of solid electrolytic annealed bare copper conductor XLPE insulated PVC tape inner sheathed galvanised steel armoured industrial power cables for working voltages upto and including 1100V in the existing surface / recessed steel/ PVC conduit as required.12 core 2.5 sq.mm.

Supplying and drawing following sizes of solid electrolytic annealed bare copper conductor XLPE insulated PVC tape inner sheathed galvanised steel armoured industrial power cables for working voltages upto and including 1100V in the existing surface / recessed steel/ PVC conduit as required. 11kv grade 2 core x 1.5 sq mm copper Ar. cable

Supplying, installing and commissionning CI flanged brass "Y" strainer with SS mesh suitable flanges, nuts and bolts, gaskets, flanges, etc… complete. ( Make: H sarkar, ) 200 mm nominal dia

Supplying, installing and commissionning CI flanged brass "Y" strainer with SS mesh suitable flanges, nuts and bolts, gaskets, flanges, etc… complete. ( Make: H sarkar, ) 150 mm nominal dia

Supplying, installing and commissionning CI flanged brass "Y" strainer with SS mesh suitable flanges, nuts and bolts, gaskets, flanges, etc… complete. ( Make: H sarkar, ) 100 mm nominal dia

Supplying, installing , testing and commisioning CI Non-Return (PN 20) valve as per IS 5312 swing check type with required flanges, nuts, bolts and gaskets etc.complete. (Make: Audco, Intervalve)250 mm nominal dia

Supplying, installing , testing and commisioning CI Non-Return (PN 20) valve as per IS 5312 swing check type with required flanges, nuts, bolts and gaskets etc.complete. (Make: Audco, Intervalve) 200 mm nominal dia

Supplying, installing , testing and commisioning CI Non-Return (PN 20) valve as per IS 5312 swing check type with required flanges, nuts, bolts and gaskets etc.complete. (Make: Audco, Intervalve) 150 mm nominal dia

Supplying, installing , testing and commisioning CI Non-Return (PN 20) valve as per IS 5312 swing check type with required flanges, nuts, bolts and gaskets etc.complete. (Make: Audco, Intervalve) 100 mm nominal dia

Supplying, installing , testing and commisioning CI Non-Return (PN 20) valve as per IS 5312 swing check type with required flanges, nuts, bolts and gaskets etc.complete. (Make: Audco, Intervalve) 80 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 300 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 250 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 200 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 150 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 100 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to BS:5155 (IS 13039) with required flanges, nuts, bolts etc complete. (200mm and above Gear Operated type) (Make: Audco, Intervalve) 80 mm nominal dia

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings etc complete. (Make: Audco, Intervalve & ITAP)20 mm nominal dia

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings etc complete. (Make: Audco, Intervalve & ITAP)25 mm nominal dia

Supply, installtion, testing and commissioning of Differential Pressure Switch, pressure range between 0-32 Bar and differential pressure range 0-4. SPDT contract switches, 15A, 250VA.C. with IP65 protection. End connection with 1/2" NPT pressure conneciton with 12/15 mm Dia isolation valve G I Nipple Elbow in an approved manner.

Supply, installtion, testing and commissioning of Differntial Pressure gauge with min. 6" / 150mm dia dial size, 0-300 PSI or 0-21 Kg/cm2 fitted. Case of the Gauge shall be rugged materials like SS / Die Cast Alluminum to be used and mounting on 25mm dia pad cock valve and GI pipe elbow as per required in an approved manner.

Supplying and installing of air cusion tank (air Vessel) 300 mm Ø 1.5 mtr in height M.S. tank fabricated from M.S. black ERW pipe, conforming to IS : 3589, having 6 mm thickness, dish end at both ends, duly welded with 300mm Ø pipe having inlet of 100mm ØShall be installed inside pump room along with fabricated MS angle supports. 20 mm ball valve with automatic air release valve with necessary GI couplings and other fittings shall be fitted on top of air cushion tank. The tank shall be painted with two coats of red color synthetic enamel over one coat of Zinc Chromate primer. The equipment shall confirm to IS 3589.

Supplying and erecting 20/25 mm Ø G.M. air release valve, with necessary G.I coupling to be fitted on top of air vessel or on wet riser.

Supplying, fabricating, structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting.

Supply and fixing of GI Perforated Cable tray strip galvanized with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets<br>and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN<br>10346 / ISO 1461 .The trays should be tested for a max. safe working load of 185 Kgs with a span distance of 1.5 meters and the deflection<br>should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. 100mm x 60mm

Supply and fixing of GI Perforated Cable tray strip galvanized with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets<br>and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN<br>10346 / ISO 1461 .The trays should be tested for a max. safe working load of 185 Kgs with a span distance of 1.5 meters and the deflection<br>should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. 150mm x 60mm

Supply and fixing of GI Perforated Cable tray strip galvanized with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets<br>and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN<br>10346 / ISO 1461 .The trays should be tested for a max. safe working load of 185 Kgs with a span distance of 1.5 meters and the deflection<br>should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. 200mm x 60mm

Supply and fixing of GI Perforated Cable tray strip galvanized with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets<br>and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN<br>10346 / ISO 1461 .The trays should be tested for a max. safe working load of 185 Kgs with a span distance of 1.5 meters and the deflection<br>should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. 300mm x 60mm

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)300 mm nominal dia (MS Pipe)

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)250 mm nominal dia (MS Pipe)

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)200 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)150 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)100 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)80 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)65 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)50 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)40 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)32 mm nominal dia

Supplying, fixing, testing and commissioning above / under ground piping of heavy grade ISI marked class 'C' MS pipes confirming to IS: 1239 Part - 1 with maleable specials confirming to IS 1239 P1 and II such as tees, elbows, checknuts, unions flanges, nipples, etc. including cutting welding fixing in/on walls, celling by using suitable supports at standard spacing and priming and painting with two coat of red colour synthetic enamal etc. as per drawing. The quoted rate shall include for chasing the walls, marking bore in walls/ floos and making good with filler material and finished in cement morter etc. complete.( Make: Jindal / Tata)25 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)200 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)150 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)100 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)80 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)65 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 16) slim seal standerd lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)50 mm nominal dia

Suppling, installing, testing and commisioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 58oC temperature rating. Sprinkler shall be UL listed / FM approved.(Pendant sprinkler) (Make: Tyco / VikingPendant type sprinkler

Suppling, installing, testing and commisioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 58oC temperature rating. Sprinkler shall be UL listed / FM approved.(Pendant sprinkler) (Make: Tyco / VikingUpright type sprinkler

Suppling, installing, testing and commisioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 58oC temperature rating. Sprinkler shall be UL listed / FM approved.(Consealed Pendant sprinkler with recesed type adjestable rosset) (Make: Tyco / Viking)

Suppling, installing, testing and commisioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 68 deg.Ctemperature rating. Sprinkler shall be UL listed / FM approved. Side wall type. (Make: Tyco / Viking)

Suppling, installing, testing and commisioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 135 deg.C temperature rating. Sprinkler shall be UL listed / FM approved. Side wall type. (Make: Tyco / Viking)

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings for screwed end type etc complete 25 mm nominal dia

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings for screwed end type etc complete 50 mm nominal dia

Supplying, installing, testing and commissioning flow indicating switch on sprinkler distribution GI pipes for each floor also other area shall be connected to fire alarm panel. The provision for connection with fire alarm panel shall be measured separately. (Make: Honeywell)

Supplying and erecting of Braided flexible pipe of 1500 mm length with necessary fitttngs complete etc.,.

Supply, installation, of Electronic Hooter of 90 dbwith all included accessories (Within MS enclosure).

Supply, installation, of 2 Core 1.5 sq.mm copper PVC insulated and PVC sheathed armoured Cable for flow switch system ( Make: Havells / RR)

Supply, installation, of 25 mm PVC conduits for Flow switch System.

Supplying and erecting 25/32 mm Ø G.M. air release valve, with necessary G.I coupling to be fitted on top of air vessel or on wet riser.

Supplying, fabricating, structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting.

Supplying, installing, testing and commisioning hydraulically operated sprinkler control valve with water motor gong bell and trims as required, pressure guages, drain valves, ball valves checkvalves, stainers etc. Complete Alarm valve. The flow meter should be capable to measure a flow rate of 0 - 3000 lpm (or 0-750gpm or 0-171 cu.m per hour). (Make: HD / NewAge)200 mm nominal dia

Supplying, installing, testing and commisioning hydraulically operated sprinkler control valve with water motor gong bell and trims as required, pressure guages, drain valves, ball valves checkvalves, stainers etc. Complete Alarm valve. The flow meter should be capable to measure a flow rate of 0 - 3000 lpm (or 0-750gpm or 0-171 cu.m per hour). (Make: HD / NewAge)150 mm nominal dia

Supply, installation, testing and commissioning of hydrant valve Single headed GM obligue suitable for 63 mm flanged inlet, female instantaneous outlet, complete with cap chain etc, as per IS : 5290. (Make: NewAge / Safex )

Supplying and installing stand post of 80 mm dia 1.8 meter height ( 6 feet ) ' C ' class G.I. Pipe, ERW, confirming to IS: 1239 with M.S block butt weld type elbow and flange, suitable for single outlet hydrant valve, to be fitted on the fire water, ring main. Stand post shall be painted with one coat of red oxide primer and two coats of P.O. enamel paint for the above ground portion and shall be protected with anti corrosive treatment with one coat of coalter primer and bituminous hexine cloth, for underground pipe.

Supply, installation, testing and commissioning of landing hydrant valve Single headed GM obligue suitable for 63 mm flanged inlet, female instantaneous outlet, complete with cap chain etc, as per IS : 5290. (Make: NewAge / Safex)

GM branch pipe with 63 mm female instantaneous inlet male threded outlet completewith hex. Basednozzle heavy quality as per IS : 903. (Make: NewAge / Safex )

Supply and fixing of 63 mm dia CP hose tested to a bursting pressure of 32 Kg / sq.cm made of superior quality cotton and nylon jacket beaming seamless woven and rot proofed each of length 15 mtrs. confirming to IS :4297 (8423) Complete with heavy quality GM coupling as per IS:5290. Hoses shall be rolled & hug to suitable M.S. structural support fixed inside the Fire duct wall. (Make: NewAge / Safex )

Hose reel complete with 20 (19) mm dia high bursting pressure rubber hose (textile reinforced) type-2 as per IS:12585 of 30 mtr long with nozzle and 20mm ball valve. Hose reel mounted in a 16SWG MS construction of revolving type drum with swinging up to 170 degree friction less rotaton with painted in post box red colour confirming to IS:884. The rate includes 20mm (nominal) dia gun metal nozzle mounted at the end. Brackets for fixing the equipments on wall. (Make: NewAge / Safex )

Hose boxes of size 30"X24"X10" made of 16 swg CR sheet with two glass fronted door,3mm thick glass the box shall be painted red outside and white inside with MS support/ stand to hydrant. Structual support fixed inside the fire hose cabinet for hanging 2nos. 15m length of 63mm dia RRL hose with couplings and one Branch pipe nozzle. The cabinet shall be supported proper manner as per approved drawings. (Make: NewAge / Safex )

Supplying and installing Fire Brigade Header of 185 mm Ø, G.I. ' C ' class pipe - 1 mtr. Long, having 4 Nos. of G.M fire breaching inlet connection, each consisting of 4 Nos. 63 mm Ø instantaneous G.M male inlet with non return valve for supplying water in fire tank / piping system. (Make: NewAge / Safex )

Two way fire brigade draw off of 185 mm Ø, G.I. ' C ' class pipe - 1 mtr. Long, having 2 Nos. of G.M fire breaching inlet connection, each consisting of 2 Nos. 63 mm Ø instantaneous G.M male inlet with NRV and butterfly valve. (Make: NewAge / Safex )

Above Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessery)200 mm nominal dia

Above Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessery)150 mm nominal dia

Above Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessery)100 mm nominal dia

Above Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessery)80 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 1.6) with bronze/GM seat slim seal standerd lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)200 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 1.6) with bronze/GM seat slim seal standerd lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)150 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 1.6) with bronze/GM seat slim seal standerd lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)100 mm nominal dia

Supplying, installing , testing and commisioning CI butterfly valve (PN 1.6) with bronze/GM seat slim seal standerd lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc complete. (Make: Audco, Intervalve)80 mm nominal dia

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings for screwed end type etc complete25 mm nominal dia

Supplying, installing , testing and commisioning Gun metal crome finished Ball valve with fittings for screwed end type etc complete50 mm nominal dia

Under Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and providing anti corosive pipe protection bituminous tape after painting with anti corossive black paint laying the pipe after excavation of trench and refilling etc. as required.200 mm nominal dia

Under Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and providing anti corosive pipe protection bituminous tape after painting with anti corossive black paint laying the pipe after excavation of trench and refilling etc. as required.150 mm nominal dia

Under Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and providing anti corosive pipe protection bituminous tape after painting with anti corossive black paint laying the pipe after excavation of trench and refilling etc. as required.100 mm nominal dia

Under Ground Piping: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and providing anti corosive pipe protection bituminous tape after painting with anti corossive black paint laying the pipe after excavation of trench and refilling etc. as required.80 mm nominal dia

Supplying and installing of 2hours Fire rated high solids thin film intumescent weather resistant Fire stop cable coating as per specifications. The coat to be applied for all electrical cables minimum 2mtr distance from the control panel / DB terminaiton.

Supplying and installing of Fire Barrier system- FIREX FM 71 - 2 hours fire rated Mortar barrier in non load bearing system for shaft sealing with necessary framing and supports as per specifications.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.Cooper/Eaton/Equivalent)

Supply and Inatallation of Addressable analogue type Smoke detectors, Combination of optical, thermal and chemical sensors with intelligent evaluation electronics, Earliest detection of lightest smoke (TF1) with the double-optical smoke detectors with Dual-Ray technology, Detector properties adapted to cater for room usage,Drift Compensation in optical and gas measurement section, Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators, Extended system parameters of improved LSN technology. MAKE: Cooper/Eaton/equivalent)

Supply and Inatallation of Addressable analogue type Heat detectors, Combination of optical, thermal and chemical sensors with intelligent evaluation electronics, Earliest detection of lightest smoke (TF1) with the double-optical smoke detectors with Dual-Ray technology, Detector properties adapted to cater for room usage,Drift Compensation in optical and gas measurement section, Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators, Extended system parameters of improved LSN technology. ( MAKE : BOSCH /Cooper/Eaton)

Supply and installing detector base

Supply of addressable analogue type manual call points,Adjustment of the Manual Call Point after alarm triggering, Automatic or manual detector addressing via rotary switch possible,Indicator LED for alarm or for inspection evaluation, Call point query routines with evaluation and multiple transmission, Individual call point identification. ( MAKE : BOSCH /Cooper/Eaton)

Supply, of amplifier 500 W for public address suitable to operate on 230V,AC 12VDC supply with 2 low impedance microphone input and 2 auxiliary inputs,tone control,protection circuit complete for speaker. including 30 zone paging console MAKE : BOSCH / Cooper/Eaton

Supply and Installation of Control Relay Module, Maximum switching current of 5 A (type DIN rail) /1 A (type in-built), Low current consumption, Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators. ( MAKE : BOSCH /Cooper/Eaton)

Supply, installation, of Addressable Monitor Modules with all included accessories. ( MAKE : BOSCH /Cooper/Eaton)

Supply and installaiton of 2C x 1.5 sq.mm PVC insulated FRLS copper armoured cable confirming to IS 694 for Fire Alarm System. MAKE : VERSHA/Kflex/Polycab/Finecore

Supply, installation, of public address speaker 3/6W Make:Sobha

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2 core 1.50 sq mm

Supply, installation, of 2mm thick PVC Conduit, FRLS Grade, with proper MS brackets and clamps/saddles in the shaft and vertical run through walls or partitions. (Fire alarm system) 25MM DIA… Make:VIP/marcoplast/Geo

Supply, installation, of 19mm dia. PVC flexible pipe for Fire alarm system.

Supply, Installation of PVC Termination Box with required connectors & Accessories

Supply and fixing of GI Perforated Cable tray strip galvanized with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets<br>and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN<br>10346 / ISO 1461 .The trays should be tested for a max. safe working load of 185 Kgs with a span distance of 1.5 meters and the deflection<br>should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. 150mm x 60mm

Supply, installation, of dust and weather proof MS enclosure with view window to house control equipment. The equipments shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffness. The panel should be powder coated of red color both inside & out side. The panel should be compartmentalized with hinged lockable single door of dust and pest proof with required size glass panel to view the alarm control panel. The panel shall have bottom & top cable entry provisions and shall be of foot mounted type with 100 mm pedestals type as per approved drawings.

Carbon-di-oxyde type fire extinguisher of 4.5 kgs. capacity CO2 gas filled in brand new seamless cylinder with power coated finish, made out of manganese steel, with wheel type valve, discharge nozzle, bend and Horn, wall-mounting bracket etc. Complete confirming to IS: 2878. (Make; Ceasefire, Safex)

ABC type fire extinguisher of 5 kgs. capacity filled in brand new seamless cylinder with powder coated finish, made out of manganese steel, with wheel type valve, discharge nozzle, bend and Horn, wall-mounting bracket etc. Complete confirming to IS: 2878 (Make; Ceasefire, Safex)

Mechanical Foam type fire extingquisher of 9 Lts capacity with initial filing in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. Complete. (Make; Ceasefire, Safex,Safepro)

Dry Chemilcal powder Fire Extinguishers filled 5/6 kg capacity, fillled in brand new seamiess cylinder with powder-coated finish, made out of manganese steel, with wheel type valve, discharge nozzle, bend and Horn, wall-mounting bracket etc. Complete. (Make; Ceasefire, Safex)

Fire Bucket of round bottom type 2mm thick sheet, powder coated painted, white color inside and fire red color out side and the letter “FIRE” in black out side and Handle with mounting bracket to engineer's approval as per IS 2546. The set of 2 buckets shall be filled with fine white sand. (Make; Ceasefire, Safex)

Clean Agent Modular Type Fire Extinguisher 05 Kgs Capacity made of Mild Steel Body of 1.6 mm thickness with pressure gauge, refillable device and safety release device CE Certified Brass valve suitable for A, B and C Classes of Fire complete with Charge of Saclon II Eco (Gas) is also known as HFC Blend A, It is a blend of Hydro Fluoro carbon and organic detossificant essence P 26. The sprinkler body will be comprising of temperature sensitive quartsoid bulb of temperature rating of 680. The cylinder will be supplied with a proper mounting arrangement to mount it on the ceiling.The Extinguisher is externally epoxy powder coated as per IS: 5 Colour Shade No. 538 complete with wall bracket (Make; Ceasefire, Safex)

Supply and providing emergency fire escape lighting system IP42 60lm consisting 2 nos lamp ,7Ah battery charging unit ,exit sign display etc in MS enclosure with 3 years warranty.(Cooper /Eaton)

Floor identification self glowing signage (I.e GROUND FLOOR…. Etc) at each stair enclosure on every floor, indicating the floor number in words, lettering size be 7.5 cm with contrasting color from back ground. The board made out of SEBERG (ITALY) - Segno, extruded anodised aluminium panels with end caps,system Cost and single side graphics andSize of the panel Size shall be minimum of 160mm (H) x 450mm( W) size up to 300x100 mm

EXIT self glowing Signage at each fire escape door on every floor lettering size be 7.5 cm with contrasting color from back ground. The board made out of SEBERG (ITALY) - Segno, extruded Powder Coated aluminium Frame with ACP Face Panel,system Cost and Single side graphics and Size shall be minimum of 160mm (H) x 450mm( W) size up to 300x100 mm Double side - Suspended type)

wall mounted "DANGER" self glowing Signage. Symbol of no smoking in red on clear background. Size of the panel shall be minimum of 160mm (H) x 450mm( W) size up to 300x100 mm. Shall be installed on doors of electrical rooms and pump room

wall mounted "NO SMOKING" self glowing Signage. Symbol of danger in red on clear background. Size of the panel shall be minimum of 160mm (H) x 450mm( W) size up to 300x100 mm. Shall be installed on doors of electrical rooms and pump room

Fencing mounted "DANGER" self glowing Signage. Symbol of no smoking in red on clear background. Size of the panel shall be minimum of 160mm (H) x 450mm( W) size up to 300x100 mm Shall be installed on fencing of transformer yards

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metre

Providing and laying in position cement concrete 1 :2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including form work etc. as required.

Providing brickwork (in width 225mm or more) with F.P.S bricks of class designation 7.5 in cement mortar 1:4 at all levells

Supplying, laying, and laying 25X6mm GI Strip

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Allies Fire Systems Pvt Ltd