PROCURMENT OF FURNITURE AGAINST SURVEYED OFF FURNITURE AT BANAR MIL STN UNDER GE BANAR

Amount

BED PLY TOP WITH MNF SET (FD-246) Overall size shall be 1980mm long, 900mm wide and 660mm high. The leg shall be 60mmx60mmin section. Teak wood long rail 35mmx90mm in section shall be provided joining head and foot board. All wood shall be first class hard teak wood. All exposed wooden surface shall be melamine polished. Hard rubber shoe shall be screwed on legs. Rest all as per drawing and as specified.

CHAIR DINING (FD-279) Overall size shall be 440mm long, 430mm wide and 890mm high. All wood shall be first class hard wood teak. Font leg shall be 30mmx55mm in section 460mm high and rear leg shall be 30mmx55mm in section 890mm. Two side stiffener shall be 20mmx25mm in section and one middle stiffener 20mmx25mm shall joining short stiffener. Cane shall be 2mm wide 0.4mm thick. French polish shall be on wooden surface. Hard rubber shoe shall be screwed on legs. Rest all as per drg & as specified.

CHAIR EASY (FD-229) Overall size shall be 575mm long 510mm wide and 740mm high. All wood shall be teak wood. Canning shall be done as per godrej pattern with 2mm wide and 0.40mm thick half round cane. All exposed wooden surface shall be melamine polished. Hard rubber shoe shall be screwed on legs. Rest all as per drg & as specified.

CHAIR WRITING(FD-280) Overall size shall be 535mm long in front side and 470mm in rear side, 470mm wide and 890mm high. All wood shall be teak wood. Canning shall be done as per godrej pattern with 2mm wide and 0.40 mm thick half round cane. All exposed wooden surface shall be melamine polished. Hard rubber shoe shall be screwed on legs. Rest all as per drg & as specified.

TABLE PEG (FD-384) Overall size shall be of 450mm long, 300mm wide and 380mm high. Wood shall be first class teak wood. Top shall be 18/19mm thick prelaminated post forming MDF board. Wooden surface shall be French polish. Hard rubber shoe shall be on legs. Rest all as per drg & as specified.

SOFA SET 4 SEATER COUSHION (FD-281) Size shall consist of four small pieces of one seat. Wood shall be of first class hard wood teak(MP). Legs shall be of 70mmx35mm in section. Wooden arms shall be made to shape out of 35mmx70mm in section teak wood. Wooden arm shall be made to shape out of 35mmx70mm in section teak wood. 100mm thick cushion of 32 density covered with best quality tapestry cloth shall be provided at seat as directed by Engineer-in-charge. All exposed surfaced shall be melamine polished. Rest all as per drg and as specified.

SOFA SET 5 SEATER COUSHION (FD-281) One set consist of one long piece of three seat and two small pieces of one seat each. All wood shall be of first class hard wood teak. Legs shall be of 70mmx35mm in section made to shape as shown on drawing. Wooden arm shall be made to shape out of 35mmx70mm in section teak wood. 100mm thick cushion of 32 density covered with best quality tapestry cloth shall be provided at seat as directed by Engineer-in-charge. All exposed surfaced shall be melamine polished. Rest all as per drg and as specified.

TABLE CENTER TWO TIER (900MM X 450MM X400MM) (FD-274) Overall size shall be 900mm long. 450mm wide and 400mm high. Wood shall be first class teak wood. Legs shall be made of 60mmx30mm in section 356mm high. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE DINING 6 PERS (FD/MAP-II/03) Overall size shall be 1500x900mmx70mm. Wood shall be first class teak wood. Powder coated MS angular plates each of 150x30x5mm thick shall be screwed to the legs at right angles with long rails & short rails. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE DRESSING GENTS WITH MIRROR (FD-230) Overall size shall be 900mm long, 300mm wide and 150mm high. The frame of mirror shall be of overall size of 410mm wide and 790mm high. Two supports of 25mmx35mmx115mm teak wood batten shall be provided as shown on drawing 5.5mm thick mirror of Swastik or Modiguad or Atul as specified by E-in-C. All wood surfaces exposed by melamine polished. Rest all as per drg & as specified.

TABLE DRESSING LADIES WITH MIRROR (FD-251) Overall size shall be 900mm long, 380mm wide and 1700mm high. All wood shall be of first class hard wood teak. Legs shall be 45mmx45mm in section at top of legs and 25mmx25mm in section at bottom of legs. 5.5mm thick 355mmx1220mm mirror of Atul or Modigaud shall be provided as directed by Engineer-in-charge. All exposed surfaced shall be melamine polished. Rest all as per drg and as specified.

TABLE WRITING (FD-275) Overall size shall be 1145mm long 600mm wide and 760mm high. Wood shall be first class hard wood teak. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TEAPOY (FD-278) Overall size shall be 600mm long x450mm wide and 540mm high. Leg shall be 0mmx30mm in section 5mm x5mm in dection groove shall be provided at the visible portion of top of legs. H type stiffener of size 20mmx50mm shall be provided even not shown on drg. All wood shall be teak wood. Top of table shall be 19mm thick post forming exterior grade MDF board of approved colour. All exposed surfaced shall be melamine polished. Rest all as per drg and as specified.

CHAIR DINIING CUSHIONED LONG BACK (FD/E6/MAP/04) All wood shall be first class hard class teak wood. The removable seat shall be made out of 75mm thick urethane foam with 40 density pasted with adhesive on 12mm thick BWR grade plywood covered with acrylic fabric of cost not less than Rs. 350/- per RM. Ground to seat height shall be 480mm irrespective of 450mm shown on drawing. All exposed wooden surface shall be melamine polished. Rest all as per drawing.

TABLE DINING 1200MM X 900MM (FD/MAP-11/03) The overall size shall be 1200x900mm. The table top shall be 18mm thick prelaminated MDF board. The pre-laminated MDF board shall confirm to the specific "ECO-MARK". PVC shoe shall be fitted on each legs. All wood surfaces exposed to view when placed in position shall be French Polished with high gloss finish. Rest all as per drg & as specified.

Description of Work / Item(s)

Amount

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031) Overall size shall be 920mmx1985mm. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall b provided for leg, body and shelf. three butt hinges of 75mm thick to each shutter. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

ALMIRAH STEEL MEDIUM (FD-1032) Overall size shall be 760mm long, 440mm wide and 1270mm high. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall b provided for leg, body and shelf. three butt hinges of 75mm thick to each shutter. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

CHAIR CB STEEL WITH ARMS (FD-75(M)) Overall size shall be 535mm wide, 560mm deep and 900mm high, Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm. Wood shall be of first class hard wood teak. Cane shall be 2mm wide and 0.4mm thick. 04 nos MS flat iron 35x25x3mm shall be welded on seat as specified as directed by E-in-C. Wood surface of seat, back and handles shall be painted with high gloss paint black. All iron surface exposed with two coats of enamel paint over a coat as specified and as directed by E-in-C. Bottom of legs shall have hard rubber shoes. Rest all as per drawing

CHAIR CB STEEL WITHOUT ARMS (FD-75(M)) Overall size shall be 535mm wide, 560mm deep and 900mm high, Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm. Wood shall be of first class hard wood teak. Cane shall be 2mm wide and 0.4mm thick. 04 nos MS flat iron 35x25x3mm shall be welded on seat as specified as directed by E-in-C. Wood surface of seat, back shall be painted with high gloss paint black. All iron surface exposed with two coats of enamel paint over a coat as specified and as directed by E-in-C. Bottom of legs shall have hard rubber shoes. Rest all as per drawing

CHAIR VARANDAH (FD-359) Overall size shall be 535mm wide, 560mm deep and 900mm high, Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm. Wood shall be of first class hard wood teak. Cane shall be 2mm wide and 0.4mm thick. 04 nos MS flat iron 35x25x3mm shall be welded on seat as specified as directed by E-in-C. Wood surface of seat, back shall be painted with high gloss paint black. All iron surface exposed with two coats of enamel paint over a coat as specified and as directed by E-in-C. Bottom of legs shall have hard rubber shoes. Rest all as per drawing

LOCKER BED SIDE STEEL (FD-1029) Over all size shall be 760mm long, 600mm wide and 1100mm high two numbers base channel of 100mm height made of mild steel sheet shall be welded at 50mm from each end of 70mm length. Steel sheet surface shall be painted with two coat of light grey/off white coloured enamel paint. Rest all as per drg & as specified.

TABLE OFFICE CLERK STEEL (FD-1004) Overall size shall be 1200mm long 610mm wide and 760mm high. Steel frame of overall size shall be 1160mm long, 570mm wide and 742mm high. Four legs of 25mm mild steel tube of 1.6mm wall thickness. Locking device shall be provided to drawers. Top shall be prelaminated post forming MDF board with 18/19mm thick. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

CHAIR VISITOR CUSIONED (MODEL NO. DVC-6003 DELITE HI-TECH) Chair visitor with arm rest made of heavy duty moulded PVC and having cushioned seat and back. Model No- DVC-6003 Delite Hi-Tech

TABLE BED SIDE (FD/E6/MAP/15 (R)) Over all size 450x450x600mm. (Upper side 150mmx450mm. Lower side 500mmx450mm). Frame shall be made out 18x18mm CRCA box section. 18mm square pipe (18 gauge) black powder coated. Drawer shall be made of 18mm thick prelaminted particle board of BWR grade. Back shall be covered with 5.5mm thick plywood of BER grade. All edges shall be finished with teak wood edging 15mmx8mm thick. Drawer shall be run on powder coated telescopic channels of 1.6mm thick. Handle shall be 100mm long powder coated. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

RACK SHOE STEEL (FD/E6/MAP/02) Main frame shall be made of 25mm dia, 18G pipe and the main shelf frame with 19mm dia, 18G pipe. The shelf shall be five, each size 300mmx700mm and the space of each shelf shall be covered by 3mm dia MS rods. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of steel surfaces. Rest all as per drg & as specified.

CHAIR SCHOOL WITH HARD BOARD (FD/E6/MAP/05) 25mm dia CRCA pipe of 16 gauge thick shall be used for frame work. 4mm thick seat shall made out of PVC moulded along with 4x10 ribs running in longitudinal & transverse directions. The seat is fitted to frame with screws made of alluminium alloy. One shelf shall be provided between the side frames below the seat made of 4mm dia MS plain bars as shown in drg. The openable top shall be of 18mm thick pre laminated particle board of exterior grade, duly fitted to slide on the right frame. The edges of top shall be finished with 1.5mm thick PVC beading with wire nails. Rest all as per drg & as specified.

B.S Constructions

BHARAT BUILDERS

BHARAT BUILDERS

B.S Constructions