Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.1 CrAccepted-AOC | ₹1.1 Cr | 1 | Accepted-AOC Accepted |
| 2 | 2₹1.2 Cr+₹6.0 L (5.31%)Rejected-Finance | ₹1.2 Cr+₹6.0 L (5.31%) | 2 | Rejected-Finance Not Lowest |
| 3 | Rejected-Technical THONIPALLAM HOUSE THEKKEDESAM POST NALLEPILLY PALAKKAD 678 553 | PALAKKAD | KERALA | 678553 | - | - | Rejected-Technical Not Lowest |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Lowest |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not Lowest |
| Sl No | Description | Qty | Unit | A.SURESH L3 | manoj.k L2 | VT MOHAMMED L1 | K HARINARAYANAN L5 | TARIKH ANVAR E L4 | ASHVI IRRIGATION L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Conversion of existing Go down to High tech Go down | |||||||||
| 1.00 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 22.4 | cum | 6,458 ₹1,44,685.03 | 5,637.58 ₹1,26,304.34 | 5,360 ₹1,20,085.44 | 5,882.97 ₹1,31,802.06 | 5,811.93 ₹1,30,210.48 | 5,000 ₹1,12,020 Lowest |
| 1.00 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 53.44 | sqm | 690 ₹36,873.6 | 665.99 ₹35,590.51 | 633 ₹33,827.52 | 694.98 ₹37,139.73 | 686.59 ₹36,691.37 | 500 ₹26,720 Lowest |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 10.69 | cum | 9,000 ₹96,192 | 8,698.51 ₹92,969.67 | 8,270 ₹88,389.76 | 9,077.14 ₹97,016.47 | 8,967.54 ₹95,845.07 | 5,000 ₹53,440 Lowest |
| 1.00 | OD4960/2024-2025:Providing and fixing trusless arch roof using pre coated galvalume profile sheets (size,shape and pitch of corrugation as approved by engineer-in charge) 0.80mm (+0.05%) total thickness with AluZink -150 coated 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer and paiting on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by engineer-in charge. The shall be fixed using self drilling/self tapping screws of size (5.5X55mm) with EPDM seal and applying silicon gel for leakage proof with out specifying the span length, required shape of bending etc. complete up to any pitch in horizontal/vertical or curved surface, excluding the cost of purlins,rafters and trusses and including cutting to size and shape where ever required. | 333.5 | sqm | 3,100 ₹10,33,850 | 2,987.64 ₹9,96,377.94 | 2,840 ₹9,47,140 | 3,117.68 ₹10,39,746.28 | 3,080.04 ₹10,27,193.34 | 500 ₹1,66,750 Lowest |
| 1.00 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 975.91 | kg | 140 ₹1,36,627.68 | 122.57 ₹1,19,617.53 | 116.5 ₹1,13,693.75 Lowest | 127.91 ₹1,24,828.9 | 126.37 ₹1,23,326 | 150 ₹1,46,386.8 |
| 1.01 | OD7048/2024-2025:Supplying and fixing 30 inch size industrial exhaust fan over the roof including erection and
installation of other roofing and making good the same etc. complete as per direction of Engineer-in-charge | 8 | no | 9,298 ₹74,384 | 8,117.25 ₹64,938 | 7,717 ₹61,736 Lowest | 8,470.57 ₹67,764.56 | 8,368.29 ₹66,946.32 | 25,000 ₹2,00,000 |
| 1.01 | 10.20:Providing and fixing bolts including nuts and washers complete. | 6.2 | kg | 176 ₹1,091.2 | 153.42 ₹951.2 | 146 ₹905.2 Lowest | 160.1 ₹992.62 | 158.17 ₹980.65 | 150 ₹930 |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 1,070 | kilogram | 90 ₹96,300 Lowest | 98.15 ₹1,05,020.5 | 93 ₹99,510 | 102.42 ₹1,09,589.4 | 101.19 ₹1,08,273.3 | 150 ₹1,60,500 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 318.52 | sqm | 335 ₹1,06,704.2 | 322.8 ₹1,02,818.26 | 306 ₹97,467.12 Lowest | 336.85 ₹1,07,293.46 | 332.75 ₹1,05,987.53 | 600 ₹1,91,112 |
Tender Value
₹1.4 Cr
EMD Value
₹50,000
Closing Date
18 Sept 2025, 6:00 pmClosed
State Agricultural Engineer
Vikas Bhavan Thiruvananthapuram 695033
GENERAL-RKVY 2024-25 Comprehensive plan for the development -State Seed Farm Alathur, Palakkad-General Civil Work
2025_AGRI_791913_1
ADFW/8928/2025-TG-II(2)/S
Open Tender
Civil Works - Others
Item Rate
720 days
Alathur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,515
Yes
₹50,000
Yes
31 Oct 2025
27 Aug 2025
19 Sept 2025
27 Aug 2025
18 Sept 2025
27 Aug 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .