C/o Indoor Wards Block in Civil Hospital Palampur Distt. Kangra (HP) (SW- Balance Work of Steel, truss, main porch, connecting passage, duck portion, pre-painted steel roofing, RCC work in outer side in enter connecting passage aluminium work SBD fi

Amount

Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering strutting and proping etc. with wooden battens and ballies including dewatering/ pumping or bailing out water wherever required at site complete upto any heights/ depth of propping and centering below supporting floor to ceiling and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like including carriage of material within all leads, lifts and other incidents.

Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ).,so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under 20cm (Twenty centimetre. wide the rate is inclusive of all leads and lifts of materials and other incidentals.

Providing and laying reinforced cement concrete 1:1.5:3(One cement: one and half sand :three graded crushed or broken stone aggregate 20 mm (Twenty milimetre) nominal size )mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-20 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in Column, Pillars, posts and struts upto floor two level including carriage of material within all leads, lifts and other incidentals.

Providing thermo mechanical treated/ Tor steel reinforcement for Reinforced cement concrete work including bending, binding and placing in position and including cost of binding wire complete for all floors including all leads and lifts and carriage of materials and other incidents.

Providing and laying cement concrete nominal mix 1:4:8(One cement Four sand :Eight graded ursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.

Second class brick masonry in common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (One Cement is to Six Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

Stone filling tightly dry hand packed under flooring including all leads,lifts of materials and other incidentals

15 mm (Fifteen milimetre) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to floor two level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm(Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement : Six sand) within all leads, lifts, and other incidentals

Providing and laying red sand stone slab flooring 40mm average thick on 20mm average thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey ement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete including carriage of material within all leads, lifts and other incidents.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads, lifts, and other incidentals.

Supplying and fixing rolling shutters of approved make made of 80mmx1.25mm(Eighty milimetre into one point two five milimetre) M.S. Laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shafts with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring Shutters having width below 3.5 mtrs. (Three decimal five metre) including carriage of materials within all leads lifts and other incidentals.

Providing and fixing 27.5 centimetre(Twenty seven decimal five centimetre) long wire spring grade No.2 for rolling shutters. including carriage of materials within all leads lifts and other incidentals.

Providing and fixing top cover for rolling shutters having width bolow 3.5 metre (Three decimal five metre) including carriage of materials within all leads lifts and other incidentals.

Providing and fixing ball bearing for rolling shutters including carriage of materials within all leads lifts and other incidentals.

Providing and laying granite stone in flooring 20mm (Twenty milimetre) average) thickness base of cement mortar 1:3 ( One Cement: Three Sand ) laid over and jointed with grey cement slurry mixed withy pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm (Twenty milimetre ) thick including carriage of materials within all leads lifts and other incidentals.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge, For doors windows and ventilatiors and glazed partitions frames including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, widnows, vetilator shutters and partition etc. with PVC/ neoprens gasket etc. completed as per the architectural drawings and the directions of Engineer in Charge ( cost of aluminum snap beading shall be paid in basic item) glazing with glass panes of 5.50mm thickness ( Weight not less than 13.75 Kg./Square metres including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x10mm (Two hundred fifty into ten milimetre)size aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts screws etc. complete including carriage of materials within all leads, lifts, and other incidentals.

Providing and fixing 125mm size (One hundred twenty five milimetre) matt finished aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of materials within all leads and lifts of materials and other incidentals .

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors including carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in beams joints, channels angles tees flats with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm (zero point sixty milimeter) thick prepainted galvanised steel sheet roofing over steel trusses hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns of primer back coat of polyster and 5 (five) microns coating fixed with J or L hooks bolts and nuts 8mm (eight milimeter) dia bitumen and GI limpet washer filled with required colour and laid completed as per direction of Engineer-In-charge polyster galvanised steel sheet of approved colour including carriage of material with in all lead and lift and other incidential as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips prepainted plain galvanised sheet hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 microns over 5 microns of primer back coat and polyster of 5 microns J or L hooks and bolts and nuts 8mm dia with bitumen and GI limpet washer filled with required shade of colour and laid completed as per direction of Engineer-In-charge 0.60mm thick polyster galvanised steel sheet of approved colour including carriage of material with in all lead and lift and other incidential.

Providing and fixing 15cm. (Fifteen centimetre) wide 45cm.(Forty five centimetre) Overall semicircular plain G.I. Sheet 0.63mm (Zero decimal six three)milimetre thick gutter with iron brackets 40x3mm (Forty into three milimetre)size, bolts nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of materials with in all leads , lifts and other incidentals

Providng and Fixing M.S. B.P Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cuttng, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts of materials and other incidentals .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidental .

150mm (One hundred fifty milimetre) dia

110mm (One hundred ten milimetre) dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

150mm (One hundred fifty milimetre) dia

110mm (One hundred ten milimetre) dia

75mm (Seventy five milimetre) dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 m thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetre) dia

Providing and fixing PVC collars ISI markedincluding fixing with approved adhesive etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

150mm (One hundred fifty milimetre) dia

Providing and fixing PVC plain "Y" juction ISI marked including fixing with approved adhesive etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

150mm (One hundred fifty milimetre) dia

75mm (Seventy five milimetre) dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetre) dia

Providing and fixing to wall ceiling and floor of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials with in all leads, lifts and other incidental .

110mm x 75mm (One hundred ten milimetre seventy five milimetre).

Sunil Walia