Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC CHATHANATTU HOUSE XXIII 362B 1 AYYANKALI ROAD EDAKOCHI KOCHI 682 010 | KOCHI | ERNAKULAM | KERALA | 682010 | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹32.4 L+₹47,465 (1.49%)Rejected-Finance ATRIA APARTMENTS 6TH FLOOR A 6 OPPOSITE GURUDWARA PERUMANOOR POST KOCHI 682015 | KOCHI | ERNAKULAM | KERALA | 682015 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹33.8 L+₹1.9 L (5.86%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2022_MES_548996_3
8152_GE_NW
Open Tender
Civil Works
Item Rate
330 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE_NW_KOCHI
₹99,800
Yes
22 Apr 2023
12 Nov 2022
30 Nov 2022
12 Nov 2022
28 Nov 2022
16 Nov 2022
12 Nov 2022 - 21 Nov 2022
Amount
Notes applicable to all the items of this BOQ (a) The area covered under this contract includes all the married accommodations under AGE B/R II. (b) The welcome maintenance to be completed within one week of handing over of key of each quarter, failing which a sum of Rs.250.00 per day of delay will be recovered from the contractor. (c) Contractor or his supervisor shall collect complaint slip on daily basis from MES office and attend/rectify the complaint and return back the complaint slip on the same day, except major complaint, the period of completion of which will be decided by Engineer in charge. Whether the complaint is major or minor will be as decided by the Engineer-in-Charge. In case the minor complaint is not rectified by the contracctor on the same day, recovery @ Rs.250/- per day of delay will be made from the contractor. (d) After completion of the work, quarters shall be handed over in a neat and tidy condition by cleaning the paint splashes and removal of debris out of Naval Base area without any extra cost to govt.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of area n.exc 1.50 Sqm complete all as specified and directed.
All as per item No. 2 above but area exc 1.50 Sqm and n.exc 4.00 Sqm each.
Taking down shutters of any description area exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed.
S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.
M&L for PCC (1:3:6) type C1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.
S&F 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides.
M&L 30mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.
S&F 30mm thick IInd Class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube,as per specification and drawing shown in SSR complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and supplying & fixing in the frame at site as per specification & drawing.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.
S&F 6 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed.
S&F 100 mm long stainless steel butt hinges complete all as specified and directed.
S&F Aluminium anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.
S&F aluminium anodized barrel tower bolt 100mm long of extruded section complete all as specified and directed.
S&F aluminium anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F aluminium bow handle "D" type anodized 150mm long complete all as specified and directed.
S&F aluminium bow handle "D" type anodized 100mm long complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F in repair 100 mm stainless steel window stay hook fixed in wooden/steel window complete all as specified
M&L for Repairs to Aluminium door shutter / windows of any size including taking down and cleaning / repairing / replacement of all fittings and fixtures (If required) and re-fixing in the same opening complete all as specified and directed at site by Engineer-in-Charge.
M&L for Repairs to steel door shutter / windows of any size including taking down and cleaning / repairing / replacement of all fittings and fixtures (If required) and re-fixing in the same opening complete all as specified and directed at site by Engineer-in-Charge.
S&F in repair drapery rod 20 mm dia incl decorative side caps Aluminium fancy type powder coated wood finish including rings, knobs, and brackets complete all as specified and directed.
S&F Aluminium powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design
S&F aluminium powder coated door shutter with frames of size 40x45x1.8 mm incl.provn of glass / ACP sheet, screwing of frame / glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges, mortice lock 4 lever with 65 mm latch size with necessary screws and plug complete all as specified & directed. Note:- The rates quoted for the item shall include the cost of one hydraulic door closer per shutter and 5 mm thick tinted glass /4mm thick ACP sheet to be fitted in shutters all as directed.
S&F aluminium powder coated partition fixed/sliding type with frames (side , top rail and intermediate sections) of size 85x44.45x1.5 mm , incl. screwing of glass / ACP panel to frame with necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. Note:- The rates quoted for the item shall include the cost of 4.80 mm thick tinted glass / 4mm thick coloured aluminium composite panels all as directed.
M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for precast cement concrete block masonry type B1, 1:3:6 (20 mm gradedstone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation, load bearing wall complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.
M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded crushed stone aggregate) as in plinth protection /hard standing , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.
M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed by Engr-in-Charge.
M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.
M&L Vitrified coloured tiles 9-10mm thick any Shade/ Double charged (square/ rectangular) area of each tiles exc 0.36 Sqm but not exc 0.90 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M&L Vitrified coloured tiles 9-10mm thick Dark Shade /Double charged (square/rectangular) area of each tiles exc 0.36 Sqm but not exc 0.90 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to receive tiles complete all as specified and directed by Engr-in-Charge.
M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for Glazed ceramic coloured joint free tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge
M&L for chequered stone finish exterior coloured heavy duty tiles of size 300x300x8-9mm thick as in floor finishes, over and including 15mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge
M&L for chequered stone finish exterior coloured heavy duty tiles of size 300x300x8-9mm thick as in skirting/dado, over and including 10mm thick rendering in Cement mortar (1:3) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge
M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like jointed in neat cement slurry, pointing in white cement mortar (1:2) using marble dust to match with shade over and including cement screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed . Note: The dosage of WPC shall be as per instructions of manufacturere
S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenche , S&F in floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.
S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenche S&F in floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.
S&F 200mm dia of half round or 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend, MS Clips etc complete all as specified.
S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed. Note applicable for item Nos.57 to 69:- Make of these items shall be Jaguar or equivalent. These items shall be purchased and kept in the store of AGE B/R II and need to fix immediately on receipt of complaint slips.
S&F in repair PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.
S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and PVC waste pipe complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern white including connecting to trap including provn of PVC matching seat cover complete all as specified and directed.
S&F in repair 150x150mm SS grating with or without hole for waste pipe complete all as specified and directed.
S&F in repair brass CP towel Rail 600mm long "D" type complete all as specified and directed.
S&F in repair vitreous china soap dish fixed to wall with screw complete all as specified and directed.
S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F PVC connection 15mm bore 45cm long complete all as specified and as directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail
&F in repair for corner shelf with 5 to 6 mm thick sheet glass and SS railing of approved quality fixed with brass screw complete all as specified and directed.
S&F in repair for SS towel ring of standard quality complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description complete all as specified
M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced n.exc 15 cm complete all as specified and directed.
Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, unframed work complete all as specified and directed.
M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.
Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed. (Tiles obtained vide dismantling shall be reused)
M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed.
M&L 2nd class HW Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 sqcm & n.exc 25 sqcm complete all as specified and directed.
M&L 2nd class HW Clean sawn battens at 15 cm centres, exc 15 sqcm &n.exc 25 sqcm complete all as specified and directed.
Fixing only 2nd class HW Clean sawn battens at 15 cm centres, exc 15 sqcm &n.exc 25 sqcm (Tile battens obtained vide dismantling shall be reused)
Dismantling boarding, any description, fixed in any position with nails
M&L 2nd class HW boarding Planed one side, with butt joints and fixed with nails supplied and fixed,25mm thick complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and directed.
S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type hook bolts and washers in roofs with grade of zinc coating 275 complete all as specified and all as directed.
S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and all as directed.
S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and all as directed.
M&L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and all as directed.
M&L Preparing the surfaces of battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with 2 coats of creosote oil complete all as specified and all as directed.
M&L for preparation of old plastered surfaces of walls including washing, rubbing down surfaces on walls including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of whitewash all as specified
M&L for preparation of old plastered surfaces of walls including washing, rubbing down surfaces on walls including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of colour wash all as specified
M&L for preparation of old plastered surfaces of ceiling including washing, rubbing down surfaces on ceiling including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of whitewash all as specified
M&L for preparation of old plastered surfaces of walls including washing, rubbing down surfaces on walls including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of cement based paint at any height up to 4th floor, complete all as specified .
M&L for preparation of old plastered surfaces of walls including washing, rubbing down surfaces on walls including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of distemper oil emulsion (washable) all as specified and as directed.
All as per item No 93 above,but on ceiling surfaces
M&L one coat of french polishing on old treated wooden surfaces of any description exc 10 cm width or girth including cleaning and preparing the surface all as specified
M&L one coat of varnishing on old treated wooden surfaces of any description over 10cm in width or girth including cleaning and preparing the surface all as specified
M&L preparing old treated surface of wood or wood based material of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified
M&L preparing old treated steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified
M&L preparing old treated surface of steel of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified
M&L preparing old treated surface of wall and applying one coat of antifungal paint complete all as specified
M&L for preparation of old plastered surfaces of walls inluding washing, rubbing down surfaces on walls inluding filling of nail holes/disturbed surfaces by cementious wall care putty and rubbing and applying two coats of cement base paint over a coat of primer all as specified
M&L for preparation of old plastered surfaces of walls inluding washing, rubbing down surfaces on walls inluding filling of nail holes/disturbed surfaces by cementious wall care putty and rubbing and applying 2 coat of weather proof Apex Ultima Protek system of Asian paint (or equivalent product of other manufactureres from list) over a coat of antifungal primer duly applied through company authorised applicator or under company supervision using modern tools and techniques complete all as specified and as directed . Note:- Manufacturer and contractor shall submit written performance Guarantee for a period of five years from the certified date of completion of work.
M&L for preparation of old plastered surfaces of walls inluding washing, rubbing down surfaces on walls inluding filling of nail holes/disturbed surfaces by cementious wall care putty and rubbing and applying two coats of Interior Emulsion (Asian Royale interior emulsion or equivalent) over and including a coat of alkali resistant primer and 1.50mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.
Taking down cement plaster from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.
M&L for rendering 10mm thick on brick work or concrete wall surfaces in cement mortar 1:6 finished even & smooth without using extra cement all as specified and directed
M&L for rendering 15mm thick on brick work or concrete wall surfaces in cement mortar 1:4 finished even & fair all as specified and directed
M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 finished even &smooth without using extra cement all as specified and directed
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of suitable primer all as specified and directed
M&L for preparation of newly plastered ceiling surfaces and application of three coats of white wash all as specified and directed
S&F in repair 300 mm MS ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for welding, easing, providing hinges and adjusting, removal and refixing after repair of steel shutters/gates of any description
M&L for demolition of floor trap/gully trap/Nahani trap, WC 'P' trap or 'S' trap including S&F trap/gully trap/Nahani trap, WC 'P' trap or 'S' trap including fixing of tiles to damaged portion as to match with existing floor finish including tiles, cement joints with CM 1:3 and water proofing compound, cement concrete 1:2:4, cleaning the pipes etc to easy water flow complete all as directed
Destruction of growth of weed plants with roots from the roof top of bldgs. and vertical surfaces of walls of buildings at any position and height, by completely removing the growth and applying 2.40 'D' oil mixed with weedicides or mixed with Veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds and making good damaged surfaces by plastering, pointing in cement mortar 1:4 or PCC 1:1.5:3 complete all as specified and directed by Engineer-in-Charge
M/s T.P SHAJI
AMRITH ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .