CA NO GE(N)AMB 56/2025 26 PETTY REPAIR/DAY TO DAY MAINT WORK INCLUDING REP/REPLACEMENT TO JOINERY, PLUMBING, SANITARY, PLASTERING AND OTHER ALLIED CONNECTED BLDG REPAIR WORKS IN MD OF SECTOR A UNDER AGE BR II OF GE NORTH AMBALA CANTT

Dismentling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed by the Engr-in-charge.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No. 02 here in before but except bricks old serviceable bricks obtained from serial item No 01 is here in before shall be used, the rate includes for, cleaning the bricks and washed with water etc., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for brickwork with sub-class `B` bricks old size in half brick thick wall straight or curved on plan to any radius built in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair mild steel Powder coated wooden finish of approved quality curtain rod 25mm dia having wall thickness 1.60 mm with and including decorative brackets ,stop roller at the end etc, fixed with stainless steel screws, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair , complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair , complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement as in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing 15mm bore cast copper alloy stop valves fancy type chromium plated screwed down, high pressure with crutch handle, scrwed both ends for iron pipe or for unions as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair , complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing vitreous china wash hand basin white, flat back of size 550mmx400mm with pedestal fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connectionSupply and fixinglush pipes for WC as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device and brass chromium plated Jet spray with PVC pipe as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen with plugs, waste pipe, brass chromium plated coupling and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm as in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing as in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 32/40 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc of standard length, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling water tanks of capacity exceeding 250 ltr and not exceeding 500 ltrs and removing from site and Supply and fixing water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass float valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair PVC tank lid/cover suitable for capacity 500 litre with and including locking arrangments such as nuts, bolts etc., complete all as specified and as directed by the Engineer-in-Charge. (Note: Make of lid shall be the same as the water tank.)

Supply and fixing 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minium weight 200 gm ) as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 10 mm thick on fair faces of brick work or concrete ceiling or chajjas surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rough cast plaster 15 mm thick in cement motar 1 :4 complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour preparation of newly plastered / un plastered surfaces of walls, pillars, cornices etc and applying two coats of cement base paint on the walls, pillars, cornices etc., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of newly plastered / un--plastered surfaces of walls and applying two coats of oil bound distemper or acrylic distemper with painting roller over a coat of alkali resistant primer over and including 1 to 2 mm thick wall care putty white cement based in two or more coats to achive smooth surfaces, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of newly plastered / un--plastered surfaces of ceiling and applying two coats of white lime wash over prepared surfaces of ceiling, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling all holes and cracks with white cement based wall care putty and applying one coat of cement base paint on the walls, pillars, cornices etc., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for complete removal of existing treatment from wall by scrappers or any other means and washing, rubbing down and stopping and applying two coats of acrylic distemper with painting roller over and including 1 to 2mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white lime wash on ceiling, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of old wooden surfaces of any description, not otherwise dscribed, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description area exceeding 1 sqm and not exceeding 2 sqm each and removing the same from site, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be seasoned and chemically pressure treated), complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelam sheet and fixed in opening, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-410-W (Gde E-250) quality 'A', complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in holdfasts complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated from following sections :- (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf . (c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. (iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame . (viii) Two coat of Synthetic enamel paint over one coat of red oxide primer. (ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws . (x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window. (xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessories as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.

Supply and fixing box type using ERW hollow 'P' section ventilators glazed/gauged including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for sheet glass 3.0mm thick figured, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing 150 mm long aluminium handle cast type anodised, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate etc., complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing as in repair stainless steel butt hinges 100 mm long medium weight and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair stainless steel butt hinges 75 mm long medium weight and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of boarding of any type/size as in cup board/wardrobes etc , fixed in any position with nails including hardware, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 18mm thick lead free PVC celuka ply (minimum density 600Kg per cum) of single side rigid lamination of approved colour other side white colour plain lamination, fixed with stainless steel screws and solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer's specifications/ instructions, complete all as specified and as directed by the Engr-in-charge.

Supply and Fixing for mild steel door shutter two leaves with frame of 20 gauges MS sheet ( all arround) and leaves of 21 gauge MS steel ( all as per Godrej pattern) with three way locking arrangement with brass lock & CP handles with duplicate keys including two coats of spray painting over a coat of red oxide primer on exposed surface, complete in existing cup boards fixed with necessary nut bolts (size of bolts 50 to 75mm long) including embedding in PCC type B-0, (1:2:4) 12.50mm graded aggregate, complete, all as specified and as directed by the Engineer-in-Charge. Note : Area of opening shall be measured.

Supply and fixing continuous (piano) hinges , width of flaps 30mm (when open) mild steel bright finish or electro galvanished, complete all as specified and as directed by the Engr-in-charge.

Supply and fixing 75 mm long fancy type brass handle, cast type, polished bright, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair grating doom 100 mm dia of stainless steel, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing as in repair waste fittings, 32 mm dia brass,chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair waste fittings, 38 mm dia brass,chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by the Engineer-in-Charge.

Resecuring or easing & adjusting shutters of any description not exceeding 1 Sqm each, without taking down shutters, complete all as specified and as directed by the Engineer-in-Charge

Resecuring or easing & adjusting shutters of any description exceeding 1 sqm and not exceeding 2 Sqm each, without taking down shutters, complete all as specified and as directed by the Engineer-in-Charge

Material and labour preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by the Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for sheet glass 3.0mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 300x600 x7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 8 to 10mm thick heavy duty (digital) vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , complete all as specified and as directed by the Engineer-in-Charge. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’

Demolition of plain cement concrete including any type of flooring of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (square/rectangular) area of each tiles exe 0.18 sqm but n exe 0.38 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (square/rectangular), of same description as of floor tiles in serial item No. 82 above but 100mm to 200mm height as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including rendering 10 mm thick in cement mortar 1:4, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 25mm thick plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base, finished even and fair without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) as in roof padding, roof treatment, mud phuska, PCC padding,lime concrete etc. and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed by Engr-in- charge. Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind.

Cutting grooves in brick wall, for inserting APP membrane and other works. 75mm wide and 65mm deep and shaping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4, complete all as specified and directed by Engr-in- charge.

Material and labour for cutting out cracks to V-section in existing roof or terracing, cleaning out and filling with hot mixture of bitumen and clean dry sand in 1:1 ratio (by weight), complete all as specified and as directed by the Engineer-in-Charge

Material and labour PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry @ 3Kg/Per sqm over old RCC surface, surface fair finished even & smooth without using extra cement, complete all as specified and directed by Engr-in- charge.

Material and labour for rendering 15 mm thick on concrete surface of roof in cement mortar 1:4 including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. Note: Cost of WPC shall be deemed to be included in quoted rate and nothing extra shall be admissible

Material and Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temprature and viscosity 70-160 cps with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shall be under ;- (i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs, mud stops, padding on roof and finished even and smooth without using extra cement including form work where ever required, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Stainless steel plate rack of size 31" x 30" x 10" of load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description, complete all as specified and as directed by the Engineer-in-Charge.

Disconnecting existing water tanks of capacity exc. 250 ltr and not exc. 500 ltrs setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from PVC/RCC tanks from bottom, sites along with mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words, in the formate day/month/year, refixing, reconnecting in position to make it operational, complete, all as specified and as directed by the Engineer-in-Charge. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in same position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150grams/Sqm (Az-150) as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of existing truss scantling and purlin complete all as specified and directed.

Material and labour for grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 including dismantling of existing truss scantling and purlin, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed, set jointed and pointed in neat cement slurry in roofs, laid in CM (1:6) 15 mm thick and jointed flush in CM (1:3) mixed with 5% crude oil by weight of cement, complete all as specified and as directed by the Engineer-in-Charge.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed by Engr-In-Charge.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof, complete all as specified and as directed by the Engineer-in-Charge.

Cleaning/Clearing Nahani traps, floor traps and Gully Traps of any desription, any size, any depth and removing sludge and accuulated soild/semi soild with proper epuipment and washing down with water for smooth functioning of sweage line, nahani traps and floor traps. Waste obtained shall be removed to distance exceeding 250m away from quarter/Md Accn and buried in ground incl necessary excavation, earth work and spreading of bleaching podwer, complete all as specified and as directed by the Engineer-in-Charge.

Cleaning/Clearing of blocked WC/EWC of any type and description including removal of soil, waste and vent pipe by rubber cap 125mm dia with wooden handle, rodding or with gunny bags and cleaning blockage upto 1st manhole with cleaning rod including removal of all materials from traps of WC etc., complete all as specified and as directed by the Engineer-in-Charge.

Note:- Amount of credit of Rs.72,670.00 for retrieved materials is mentioned in Schedule of Credit Page No…………………. of tender documents in pdf form which will be deducted offline while acceptance of tender.