Providing and Fixing of 3 phase LT line to Metabolic Stall of Department of Animal Nutrition of COVAS, CSKHPKV Palampur.

Amount

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Havells/KEI/Plaza/Polycab make). Armoured cable 120 sq. mm (3.5 core)

Supplying and erection of sheet metal cubical pedestal / wall mounted cubical panel of made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, erection of MCCBs/switchgears with tinned copper shredders, thimbles, separators, insulators etc., Panel should be welded with each compartment on five sides & front side hinged, insulated Gaskets, etc complete with locking arrangement with sufficient numbers of vertical and horizontal intermediate members for housing switchgear/MCCBs/ MCBs/Kit Kat in separate compartments including wiring of switchgears with suitable copper cables/ copper strips. The cubical pedestal shall have cable entry box from below, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form.

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of about 1800mm depth, to be filled in up to1800 mm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 200 mm from G/L in hume pipe of lenght 2000mm , including painting of pole with aluminium colour paint over a red oxide coat complete in all respects as required:- Overall length 8 Meters

Supplying and fixing of cross arm on existing pole of 1.5mtrs of 100x50x5mm, C type MS channel for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc and painting with primer and finished paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm of length 1500mm and breadth 600mm for double over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying and erection of shackle insulator with galvanised 'D' iron clamps complete with ,G. I. bolts, nuts and washers, coach screws etc. as required.

Supplying and erection of shackle insulator 75 mm X 90 mm, G. I. bolts, nuts and washers, coach screws etc. as required.

Supplying and erection of pole stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and guy insulator etc including excavation and refilling etc. as required.

Supplying and Erection of aluminium conductor (ACSR) of size 6/1/4.72mm (dog) mm dia. on the pole including binding, saging, jumpering etc. as required.

Supplying and Erection of All aluminium conductor AAAC of size 7/3.15mm (Rabbit) dia. on the pole including binding, saging, jumpering etc. as required

Supplying and Erection of GI wire of size 4 mm (8SWG) diameter on the pole including binding etc. as required.

Supplying and erection of 3 phase LT line PVC spiral spacer as required.

Supplying and fixing Rewireable Kit kat fuse suitable for 400amps, 415 volts with bus bar links on surface, interconnections as required

M/S sharma electrical and contractor (BID ID -593346)