Construction of cement concrete road at Ind. Area Nagri Distt. Kangra (HP). (from end point of mettled portion to newly carved plot of phase-II) SH- C/o road, drains and RCC culverts (Balance work thereof).

Amount

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing, laying,spreading and compacting grade stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer( Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub- base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density i/c lightining, barricading and maintenance of diversions,etc. as per technical specifications Clause 406. By mechanical means. including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying Cement concrete 1:4:8(1cement:4sand:8graded stone aggregate 40mm nominal size) and curing complete exculding cost of form work in foundation and plinth. including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 40mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-40 grade approved by HPPWD (NTC/Ashok Panjla Tiles/NTCCI/Pooja Concrete fabricators) with approved color design and pattern.

Providing and laying Plain Cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 20mm nominal size) and curring complete including the cost of form work in foundation and plinth. As per drawing and technical specifications clause 802, 803, 1202 &1203 including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement.50mm thick including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing concrete for plain/reinforced concrete in open foundations complete per drawings and technical specifications Clause 802, 803, 1202 & 1203 nominal mix 1:2:4 (1 cement 2 Sand : 4 crushed graded stone aggregate 20 mm nominal size) including cost of formwork and including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and laying Cement concrete 1:1.5:3 (1cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) in super structure and curring complete including the cost of form work . As per drawing and technical specifications clause 800, 1205.4 &1205.5 including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Providing tor steel reinforcement for RCC work including bending binding and placing in position in all heights including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:-In gratings framed guard bars,ladders,railing brackets and similar works including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Painting two coats(excluding priming coat)on steel andother metal surfaces with enamel paint,brushing togive an even shade including cleaning the surface of all dirt,dust and other foreign matter.Enamel paint other than white including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Dressing of ground i/c cutting and filling , ramming , consolidayion etc. and including surplus material to be dresses dispposed off outside the pheriphery og Ind. Area boundry including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing , fixing and jointing G.I. pipes complete with G.I. fittings (union , bends etc) including trenching and refilling etc. 65mm dia including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing , fixing and jointing MS flanges (in pair) for jointing with the GI pipes including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing weapholes in brick masonry / stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specificatin clauses 614, 709, 1204.3.7 including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing of dual directional delinators made of dia 18 guage rectangular pipe of size 25x63mm and of length 600mm pipe stove enameled and baket to 120 c/power coated head made of ABC plastic rounded moulded with flat face, provided with high intensity prismatic reflectors of colour (white/red) of size 100 x 125 mm with addtional reflective strip 20mm wide make RS mark including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Single legged stop sign boards (900mm octagon) micro prismatic grade retre reflective board made out of 12mm thick aluminium or ACP sheet to be covered with micro prismatic grade retre reflective sheeting as per IRC standards, the back of aluminium sheet to be painted with epoxy paint of standard make, fixed to structural steel frame work of MS angle 25x25x3mm with nuts/bolts/rivets ensuring safety against removal of plates, fixed to one vertical post of 65x65x5mm anglehaving length of 1.80 mtr long including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Saravjeet

Ravinder Kumar

TANUJ SHARMA

Kapil Sharma