Repair and maintenance of internal wiring and re- winding of Fans, Geyser and allied works at MRS Garhi Cantt Mall Road and Young Road and RIMC under AGE EM-II of GE Dehradun.

Amount

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty surface PVC conduit incl fittings and all accessories with suitable size of pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. (Note: Colour code shall be maintained as per IE rule)

One light point/ ceiling fan point/ Exhaust fan point /bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No. 2.00 here in above but one 6 pin socket outlet 15 Amp independent, cable 4 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral and 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty PVC casing and caping with all accessories with suitable size of pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. (Note: Colour code shall be maintained as per IE rule)

One light point/ ceiling fan point/ Exhaust fan point /bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No. 4.00 above but one 6 pin socket outlet 15 Amp independent, cable 4 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral and 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. (Note: Colour code shall be maintained as per IE rule)

One light point/ ceiling fan point/ Exhaust fan point / bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No. 6.00 above but one 3 pin socket outlet 15 Amp independent, cable 4 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral and 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer) and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugsas required for following :- ( Note:- 1. Modular switches and cover plates shall be measured and paid separately. 2. Colour code shall be maintained as per IE rule.).

One light point /Ceiling fan point/ Exhaust fan point / bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No. 8.00 above but one 6 pin socket outlet 15 Amp independent, with 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as phase and neutral and 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

S&F switch piano flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 Volt AC complete all as specified & directed.

S&F socket outlet multipurpose 5 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet 2-in1,5 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed.

S&F Bell push flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F electric Bell SP, 250V AC complete all as specified & directed.

S&F switch socket combination multipurpose 5 Amps, 5 pin,2 in 1, SP 250 Volt AC, complete all as specified & directed.

S&F switch socket combination multipurpose 5 & 15 Amps, 5 pin,2 in 1, SP 250 Volt AC, complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. Complete.

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified & directed.

S&F moduler switch flush, button type 6 Amp SP one module one way complete all as specified .

S&F moduler switch flush button type 16 Amps SP one module one way complete all as specified .

S&F moduler socket outlet multipurpose 5 Pin 6 Amp two module complete all as specified & directed.

S&F moduler socket outlet two in one three pin 6 Amp and 16 Amp two module flush type complete al as specified.

S&F moduler bell push 6 Amp one module one way complete all as specified.

S&F 4 step modular electronic fan regulator step type 2 module 120 watts 360 degree complete all as specified. .

S&F combind cover plate white with frame 1 module suitable for modular switches complete all as specified.

S&F combind cover plate white with frame 2 module suitable for modular switches complete all as specified.

S&F combind cover plate white with frame 3 module suitable for modular switch/socket complete all as specified. .

S&F combind cover plate white with frame 4 module suitable for modular switch/socket complete all as specified. .

S&F combind cover plate white with frame 6 module suitable for modular switch/socket complete all as specified.

S&F combind cover plate white with frame 8 module suitable for modular switch/socket complete all as specified.

S&F GI sunken box with flush metal 1 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F GI sunken box with flush metal 2 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F GI sunken box with flush metal 3 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F GI sunken box with flush metal 4 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F GI sunken box with flush metal 6 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F GI sunken box with flush metal 8 module suitable for modular switches/sockets etc including making good the disturded suface with finishingto matching the existing surface , complete all as specified.

S&F in replacement of energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 9/10 watts complete all as specified and directed by Engr-in-charge. Make:CG Cat Pt NO-LBHP-10-CDL/Havells cat Pt No- Endura Linearneobs10 w LED 840 SPCWH or equivalent in mepro/phlips as approved.

S&F in replacement mirror light decorative compact luminaire with decorative end caps 9/10 Watt or higher LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No Edgelite or equilent in Philips/Wipro/CG as approved.

S&F in replacement surface mounted LED luminaire 600mmx600 mm ,32 or higher wattage,made of CRCA powder coated finish with high transmitivity diffuser,CCT upto 6500k,CRI>80,PF>0.95, or higher side including driver min internal surge protection 2.5 kv including connicting to electric source with suitable copper wire complete all as specified. Make- CG LSTP-45-CDL or equivalent in Philips/Wipro/Havells as approved.

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specrified & directed

M&L in replacement factory made meter distribution board made out of thermoplastic polycarbonate of size 600x600x170 mm (dust,weather,shock,rust,proof ,corrosion free,acid & chemical resistance,,halogen free, & free cyclable material) 230 v Ac,50 Hz, 3 wire, gasket shall be embeded with T- locking arrangement and suitable for mounting of electronic meter-04 Nos including electrical connection with existing system and sealing properly ,complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from strip of 32x6mm earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as specified and directed. Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of galvanised strip 32x6mm earth lead and 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item

M&L GI bracket made out of 32mm GI pipe medium grade tubing, bend for fabrication to shape as required length of pipe not less than 0.90 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer ,complete all as directed

S&F in replacement tamper proof electronic single phase whole currrent energy meter with enclausure (LCD display) 10 Amp to 60 Amp, 240 volt class 1.05 and class 2.05 AC supply including cable connection, proper sealing with Led. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box . The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL/Legrand (Note:- Old unserviceable meter will be deposited to E/M store yard)

S&F in replacement, TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge . Make: Legrand/L&T/ Indo Asian.

S&F MCB TPN 430 Volt 10 KA 63 Amp 'C' series conforming to ISI , complete all as specified & directed.

S&F MCB SPN, 240 volt 10 KA 6-40 Amp 'C' series conforming to ISI , complete all as specified and directed .

S&F MCB SP, 240 volt 10 KA 6-40 Amp 'C' series conforming to ISI , complete all as specified and directed .

S&F MCCB 415 Volt 25 KA 3 pole 125 Amp thermal magnetic trip release & setting with fixing arrangement complete all as specified and directed.

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.5 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit on surface medium duty with heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:- three runs of wire and one run of conduit shall be measured as one meter only for payment purpose

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.5 Sq.mm. (nominal area) drawing in and including PVC casing & caping medium duty with accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:-Three runs of wire and one run of casing & caping shall be measured as one meter only for payment purpose

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:- Three runs of wire and one run of conduit shall be measured as one meter only for payment purpose

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including PVC casing & caping medium duty with accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:-Three runs of wire and one run of casing & caping shall be measured as one meter only for payment purpose

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 25 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:-Three runs of wire and one run of conduit shall be measured as one meter only for payment purpose

M&L sub main wiring with 3 run (P+N+Earth continuty conductor) of multi strand core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including PVC casing & caping medium duty with accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing submain wiring, complete all as specified & directed. Note:-Three runs of wire and one run of casing & caping shall be measured as one meter only for payment purpose

S&F in replacement, sheet metal enclosures double door TPN for DBs when MCB's to be used,4 way with 200 amps rated bus bar complete all as specified and directed by Engr-in-charge.

S&F in replacement, sheet metal enclosures double door SPN for DBs when MCB's to be used,12 way with 200 amps rated bus bar complete all as specified and directed by Engr-in-charge.

S&F in replacement, sheet metal enclosures double door SPN for DBs when MCB's to be used,8 way with 200 amps rated bus bar complete all as specified and directed by Engr-in-charge.

S&F in replacement, sheet metal enclosures double door SPN for DBs when MCB's to be used,4 way with 200 amps rated bus bar complete all as specified and directed by Engr-in-charge.

Taking down ceiling fan, exhaust fan of any sweep and in any position and dismantling blades, removing fan and blades to store, removing capacitor carefully for overhauling checking serviceability of bearings/bush, winding etc cleaning the fan reassembling after replacing the unserviceable parts such as capacitor, rubber bush, split pins, nut & bolts complete (To be paid under relevant item of the Sch 'A' under supply only), and testing the same, hanging ceiling fan connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge .

Fixing only repaired or new ceiling fan, exhaust fan of any sweep and connecting with flexible white 3 core PVC insulated copper multistranded conductor 23/0.0066 up to the ceiling rose complete all as specified and directed.

M&L for rewinding of ceiling fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 1200 mm sweep.complete all as specified and directed.

M&L for rewinding of ceiling fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 1400 mm sweep.complete all as specified and directed.

M&L for rewinding of Exhaust fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 300 mm sweep.complete all as specified and directed.

M&L for rewinding of exhaust fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete upto 380 mm sweep.complete all as specified and directed.

S&F in repair ball bearing No. 6201/6202 for 1200/1400mm ceiling fans & 300/380/450mm exhaust fan as required at site complete all as specified and directed.

S&F in repair ball bearing No. 6203/6204 for 1200/1400mm ceiling fans & 300/380/450mm exhaust fan as required at sitecomplete all as specified and directed. .

S&F in repair GM bush for 1200/1400 mm sweep ceiling fan as required at site.complete all as specified and directed.

S&F in repair GM bush for 450/350/300/230mm sweep exhaust fan as required at site.complete all as specified and directed.

S&F in repair heavy duty rubber insulator for 1200/1400 mm sweep for hanging ceiling fan.complete all as specified and directed.

M&L for painting to ceiling fans / exhaust fan complete, in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning of all dust etc, complete all as specified and directed.

S&F in repair fan capacitor 2.5 mfd complete all as specified and directed.

S&F in repair fan capacitor 3.15 to 4 mfd complete all as specified and directed.

S&F in repair ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI pipe of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as specified and directed.

S&F in repair white flexible wire three core 23/0.0066 with copper multistranded conductor PVC insulated complete all as specified and directed.

S&F in repair PVC canopy suitable for ceiling fan 1200/1400 mm as per requirement at site ,complete all as specified and directed.

S&F louvers shutters round or squire made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old louvers shutter complete all as specified and directed.

All as per item No 79 here in above but louvers shutters suitable for 450 mm exhaust fan complete all as specified.

S&F in repair flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 60 watt or higher size LED , Glass cover complete all as specified and directed.

S&F in repair gang box PVC for 5 Amps switch and socket complete all as specified and directed.

S&F in repair gang box PVC for 15 Amps switch and socket complete all as specified and directed.

S&F in repair PVC batten 20mm ISI marked complete all as specified and directed.

S&F PVC accessories i.e Junction, L Bend, Tee etc medium grade 20 MM dia complete all as specified and directed.

S&F saddle PVC nail type complete all as specified and directed.

S&F clamps with nut bolt for fixing of geyser, as per existing size complete all as specified and directed.

S&F fastner (Nut & Bolt) 75 mm long complete all as specified and directed.

S&F in replacement new building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1x30 Watt LED type complete, pre-wired complete all as specified Make Greenstar/Philips/Wipro/Havells

Supply, laying, jointing and testing in replacement of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size including taking down old cables of any type complete all as specified and directed.

All as per item No 90 here in above but cable of size 16 sqmm 4 core complete all as specified and directed.

All as per item No 90 here in above but cable of size 25 sqmm 3½ core complete all as specified and directed.

All as per item No 90 here in above but cable of size 35 sqmm 3½ core complete all as specified and directed.

All as per item No 90 here in above but cable of size 50 sqmm 3½ core complete all as specified and directed.

M&L for Servicing of geyser 25/50 ltr capacity in installed position (taking down from its original position on ground if required) opening up and taking out syphon assembly etc, removing deposited scales from syphon assembly, destoning complete inner tank, inspection against any leakages, serviceability of other parts and reassembling after replacement of unserviceable parts such as heating element, thermostat, indicating lamp, plug top, three core cable, rubber gasket, split plate, apparatus plate, NRV if required (Parts shall be measured and paid for separately under relevant item of the Sch under supply only) and installation of the geyser to its original position and connecting all electric and water supply connections complete all as directed

Supply only water heating element any type (Triangle/cup/box) as per site requirement of capacity upto 2 KW ISI Marked. : Make:- Newton / Jaquar/ Bajaj.

Supply only thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make:- Newton / Jaquar/ Bajaj.

Supply only thermostat for new version twin sensor short type with control box as per site requirement temp setting 0.75degree centigrade ISI Marked, complete all as specified and directed. Make:- Newton / Jaquar/ Bajaj.

Supply only split plate for 25/35/50 ltrs capacity geyser as per site requirement and made out of 20 guage MS sheet duly painted complete all as specified and directed.

Supply only geyser inner tank made out of stainless steel sheet conforming to relevant IS for 25 ltrs geyser as per existing model and make, complete all as specifeid and directed. Make:- Crompton/Racold/Venus/Havells/Jaquar

Supply only syphon assembly with fusible plug, pressure release valve, vent pipe and rubber gasket etc for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge. Make:- Crompton/Bajaj/Racold/Jaquar.

Supply only three core PVC insulated flexible and over all PVC round cable of size 40/0.0060 with multi stranded copper conductor complete all as specified and directed. Make : KEI/Poly cab/Havells.

Supply only water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot and cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed. Make:- Crompton/Havells/Prayag

Supply only of unserviceable red/green indicating lamp for geysers complete all as specified