PROVN OF TOILET AND SPORTS STORE AT UNIT PLAY GROUND AND PARQUET FLOORING IN SINGLE OFRRS ACCN AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc. or for shafts wells, cesspits, manholes etc. n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Surface dressing n.exc 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Material & Labour PCC 1:2:4 type B1 (20 mm graded graded crushed stone aggregate as in copings including necessary formworks complete all as specified and directed.

Material & Labour for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & Labour for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone agg) as in surface channels and drains including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc all as specified and directed.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material & Labour for plain cement concrete 1:3:6type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:4:8 typeD2 using 40mm graded crushed stone aggregate as in sub base etc complete all as specified and directed.

Material & Labour Chequred cement concrete tiles 30cmx30cmx25mm thick coloured with grey cement and pigment glossy finish as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

Material & Labour for APP based polymeric membrane minimum weight not less than 3.6Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on over and including tack coat of industrial bitumen 85/25 @ 1.20 kg/ sqm over and including a coat of bituminous primer confirming to IS:3384-1965 @ 0.30 kg /sqm by forced application over entire roof area over and including15mm thick cement plaster in CM (1:4) using & includingWPC @ 3% by weight of cement as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) on concrete surface of roof / parapet, with over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method complete all as specified .

Material & Labour for Glazed ceramic coloured digital joint free tile of size 300x200x7mm thick fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

Material & Labour for 40mm thick damp proof course to horizontal or vertical surfaces inclding necessary form work in cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate using WPC as per manufacturerer's instructions complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Material & Labour for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

Material & Labour for precast cement concrete block masonry with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregate) exc 10 cm in width and setting in CM 1:6complete all as specified and directed by Engg-in- Charge.

Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on stone masonary surfaces or surfaces other fair faces of brick work , finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material & Labour for 5 mm thick rendering in CM 1:4 on concrete surfaces as on ceiling and finished even and smooth complete all as specified and directed.

Supply only WPC complete all as specified and directed.

Material & Labour preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material & Labour preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material & labour for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer with alkali resistant priming paint complete all as pecified and directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 30mm thick IInd class hard wood glazed and skelton window and ventilator shutters open rebated and prepared to receive glass, guage etc, without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers complete all as specified and directed.

Supply & Fixing of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified & directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1 of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers complete all as specified and directed.

Material & Labour for fasteners and stays / hold fast casement stays, size 300 mm cast iron (malleable) or mild steel with hinged joint and two plates, with studs complete all as specified

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 75 mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 100mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing 125 mm size aluminium alloy handle fabricated type anodised complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or stainless steel d wire staples complete all as specified and directed.

Supply & Fixing harrison rails mild steel chromium plated with fixing brackets and stops etc complete all as specified and directed.

Supply & Fixing frame work such as in guard bar, gate grills, grating , made of hollow tubular section etc with ends of bars shouldered and/or rebated,or forged into spike frame guard bars,wake way,railing,frame work of water tank and similar work confirming to Fe-410-w (Gde 250) complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All per item No 47 herein bebore but 6mm to 8mm dia

All per item No 47 here in bebore but 5mm dia and over upto and including 10mm dia in strrups, spacers and binders

Material & Labour for reinforced cement concrete 1:1.5:3 type B-1(using 20mm graded crushed stone aggregate)., as in Slab supported on walls,beams ,roof, landing, balconies,complete all as specified.

Material and labour reinforced cement concrete 1:2:4 Type B0 using 12.5 mm graded crushed stone aggregate as in beam, cantilever, lintel over 1.5m span complete all as specified

Use and waste of Formwork to soffits of suspended stables such as roof slabs, floor slabs, landings and similar work, not exc. 200mm thick (Horizontal or stoping) Rough finished surface of concrete flat complete all as specified.

Use and waste of Formwork to sides and soffits of RCC floor or roof beam , lintels, cantilevers etc for rough finished surfaces of concrete flat.complete all as specified.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings laid in trenches complete all as specified and directed.

Material & Labour for 20mm bore GI tubing, medium grade, galvanised with and including all GI fittings laid in trenches complete all as specified and directed.

Material & Labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Supply & Fixing in repairs fancy type pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed

Supply and fixing bib tap 15mm dia cast copper alloy, chromium plated fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified .

Supply and fixing stop valve 15 mm dia cast copper alloy, fancy type , chromium plated with crutch or butterfly handle, screwed both ends ends for iron pipe or for union complete all as specified .

Supply & Fixing PVC connection pipe 45 cm long with two brass nuts (union) at ends, for 15 mm dia, complete all as specified and directed.

Supplying and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, handle including pipe 32mm dia of high density polythylene pipe (HDPE) flush pipe including brackets completeall as specified.

Supply & Fixing vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed fixed in repairs complete all as specified and directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling, PVC waste pipe , 15mm PVC connection , 15mm pillar tap chromium platerd complete all as specified and directed.

Supply and fixing in repair vitreous china urinal, half stall type ( Back or corner wall type) ( excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply and Fixing Grating square 150 mm size of PTMT (Minimum weight 100gms, complete all as specified and as directed.

Supply and Fixing vitreous china wash down water closet pedestal pattern white, including connection to trap, flushing pipe, and fixing of seat cover closed pettern with flat bottom and mild steel chromium plate or aluminised hinging device and including jet with lid complete (excluding flushing cistern and flush pipe) complete including making good to floor complete all as specified and as directed.

Supply & fixing coloured rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply and Fixing 110 mm bore PVC (SWR) soil , waste & vent pipe pipe single socketed in any length with rubber ring joints fixed to walls or in floor with and including clamps, nut bolts etc complete all as specified.

Supply and Fixing 75 mm bore PVC (SWR) soil , waste & vent pipe pipe single socketed in any length with rubber ring joints fixed to walls or in floor with and including clamps, nut bolts etc complete all as specified.

Supply and Fixing PVC (SWR) bends any radius 110 mm complete all as specified.

Supply and Fixing PVC (SWR) bends any radius 75mm complete all as specified.

Supply and Fixing PVC (SWR) vent cowl 110 mm complete all as specified.

Material & Labour for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent cement

Material & Labour for 75mm dia PVC floor trap with grating including jointing with cement solvent complete all as specified and directed.

Supply and Fixing Soap dish, vitreous China white, approximate size 160x 160x90mm, complete all as specified and as directed.

Supply and Fixing CP toilet paper holder complete all as specified and as directed. Make - prayag (Cat Part No - BA-05) or equvalent cat part in make specified in particular specification.

Supply and Fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( minimum weight 190 gms) complete all as specified and directed.

Material & Labour Salt Glazed stone ware drain pipes laid in trenches and jointed as specifed 150mm internal dia of pipe complete all as specified

Material & labour for cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Supply and Fixing 8 to 9 mm thick plowood, grade, BWR,type BB fixed with screw to timber framework complete all as specified and directed .

Material & Labour for 8 mm thick wooden pieces machine pressed one side laminated and other side balancing green as in parquet flooring with and including necessary padding as required at site , fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

E/M works Supply & Fixing point wiring for one light point/ fan/ bell (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No.83 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.83 above One socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 83 herein before but wiring with 2.5sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let multi purpose 2 in 1,3 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing MCB single pole & neutral , 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing LED bulb 9watt complete all as specified and directed.

Supply, laying, jointing and commissioning LT XLPE 1100 volts grade heavy duty cable PVC insulated, stranded aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing cross sectional area 16sqmm 2 core laid in trenches, floor through pipes,in duct, on pole and roads etc including making good as per existing complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for the same. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as specified and directed by Engineer-in-charge.

Supply and fixing / laying of galvanized iron pipe of 32 mm nominal bore light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc with clamps nuts, bolts and washers complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be included in the item rate.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed in sunk/flush to the wall or nitch complete all as specified and directed .

Supply & Fixing Exhaust fan metallic body heavy duty ISI mark, 300 mm sweepp 230 volt single phase with louvers including all connecting accessories and fixing in openings of wall, grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

Supply & Fixing LED light fitting 1x12 watt bulk head luminaries with PDC aluminium housing and milky diffuser as per Cat part No LTB12 W LED of make C&S complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable, with suitable size of 230V, 50Hz, complete all as specified and directed. Make ;- C&S Cat part No LTB12WLED, or equivalent cat part in make specified in particular specification.

Supply and fixing LED Security light 36 Watt luminaire fitting IP 66 powder coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens with electronic driver, fitting will be fitted with GI pipe light grade Bracket 1.2 mtr long 40 mm dia fixed on wall /polewith suitable size MS clamp including nut, bolts and washers and making connection with using 1.5 sqmm PVC insulated Multistranded copper conductor three single core cable complete all as specified and directed. Make ;- C&S Cat part No LTESS14x2.5HPLED/LS or equivalent cat part in make specified in particular specification.

Supply and fixing LED cera batten complete with retrofit T8 polycarbonate/ glass tube indoor LED tube light 20 watt with aluminium extrusion in 'D' shaped have large diameter for increased convection heat transfer included one LED tube rod and driver, internally prewird of 1.5 sqmm twin twisted flexible complete all as specified and directed. Make ;- Havells Cat part No REGALBATTENT8UPTO1x22WDSBSWH or equivalent cat part in make specified in particular specification.

Supply and fixing High quality LED cera batten complete with retrofit T8 polycarbonate/ glass tube, 10 watt , suitable for mirror light internally prewired of 1.5 sqmm twin twisted flexible complete all as specified and directed. Make ;- C&S Cat part No LTDC01210WLED/WD or equivalent cat part in make specified in particular specification.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate), GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed Note: - On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

aditya construction

M/S NARAYAN SINGH SIRARI