SPL REPAIR TO TOILET OF BLDG NO P 76 ROOF TREATMENT TO BLDG NO P 204 AND PROVN OF SMART TYPE PREPAID METERS AT CERTAIN MD ACCN AT MIL STN GANDHINAGAR

Amount

M&L for excavation in trenches n exc 1.5 m deep and n exc 1.5 m wide and getting out in soft/loose soil complete all as specified and directed.

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 Km out side MD land complete all as specified and directed.

M&L for hard core of gauge exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/rammed to a true surface complete all as specified.

Supply only, liquid water proofing compound mixed as per manufacturer instructon mixed in cement concreter or cement mortar complete all as specified and directed.

Removing existing water proffing /black top treatment from parapet wall, removing material to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for water proofing treatment to non accessible roof slabs by applying one coat of cold bituminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching including applying one coat of bituminous aluminium paint over membrane all as specified and directed .

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as sepcified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

M&L for Granite 16mm thick (of any type) work (table rubbed and polished) in steps, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed.

S&F, 35mm thick Second class hard wood plain, framed, panneled shutter (any number of panels) with panels of veneered particle board or plywood or bison board complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for anodised aluminium windows/ventilators with one or more rebates including joining cleat for fixing etc. complete with frames, shutters and grills of size directed by Engineer-in-Charge including handles, tower bolts, grills, etc complete all as sepcified and directed. Note : Sheet glass, wire cloth, lock, etc shall be measured and paid separately.

M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.

M&L for treatment of sunken portion consisting under mentioned items(i) 15 mm thick plastering in C:M 1:3 with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.5 Kg/sqm and then pasting of polythene film, 150 micron, with cold back adhesive. (iii) Fixing 25mm dia GI pipe (medium rade) spout of length 45 cm (iv) The process of (v) to (vi) shall only be done after

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 40mm thick cement cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) in sub base to receive floor finishes with out using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 50 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed.

M&L for 40 mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate mixed with liquid water proofing compound as per manufacturer instruction, laid in slope 1:30 on roof as in padding, finished even and fair complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tiles exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L, for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick (compacted thickness) sand cushion below paver blocks complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on on fair faces of concrete surfaces as on PCC padding in CM 1:3 mixed with liquid water proofing compound as per manufacturer instruction and finish the surface even and smooth without using extra cement for laying APP membrane at non-accessible roof (mumty) all as directed. (Note :- water proofing compound shall be measured and paid sepretally)

M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F, 3 mm thick figured sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed complete all as specified and directed.

M&L for preparation of new steel surface of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of zinc primer complete all as specified and directed.

M&L for preparation of new wooden surface of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

S&F, 32mm borem High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 1000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning o complete, all as specified and directed.

Supply, hoisting and fixing in position in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top) including dismantling of old PVC/AC water storage tank of 500 liter capacity complete all as specified and directed.

Supply, hoisting, fixing in position and connecting, in repairs,1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supply only, pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed

S&F in repair, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F in repair 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F in repair 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

M&L for Cement Concrete type B-2, 1:2:4 using 40 mm graded crushed stone graded agg as in fdn filling and mass concrete (water storage tank platefom).

S&F, in repair, Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F, in repair, Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S&F, urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Midium weight 60 gms) complete all as specified and directed.

S&F, in repair, angular stop cock 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F, in repair, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) Tee equal or unequal any radius with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) Tee equal or unequal any radius with access door complete all as specified and directed.

S&F, 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F, 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repair, vitreous china squatting pan, ‘Orrisa pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) but including cleaning the sunken portion of WC by demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E2 using 20mm graded stone aggregate, finished even and smooth complete all as specified and directed.

S&F in repair, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F, in repair, PTMT soap disc with holder complete all as specified and directed.

S&F, in repair, PVC low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

M&L for taking down carefully copper/aluminium point, wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for One light/fan /Exhaust point controlled by one switch

S&F, in repairs, LED light fitting, 1 x 20 watt 220V, AC, decorative box type with driver , holder , including LED tube light complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

S&F, in repair, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

Supply, installation, testing & commissioning of 1 Phase ,2 wire Smart Prepaid energy Meters BIS 16444 Marked in existing Meter Board /Floor Panels with Pre Payment shock proof capacitive touch keypad ( Similar as IOS and android phone technology), bluethoot based Digital having current range 05-60 Amp 240Volt accuracy class 1.0 along with inbuilt load control switch containing provision of TOD & RTC inbuilt feature sense for data transfer (wireless without DCU ,USB Pen drive) no other extra equipment required for data transfer, meter itself capable for data transfer) capable to define 4 tariff slabs, happy hour & holiday definition, when user go outside of the home, via mobile app user can decrease its sanctioned load, user can punch recharge token on meter keypad and manually and automatic via mobile app meter shuuld support the following data's -30 minutes instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and Max Demand. Meter should have connect /Disconnect remotely functionality operable for prepaid /post paid billing software. The meter should support communication protocol NB IOT /DLMS with the softwareall as specified and directed. That the manufacture or their service provider shall furnish 10 (Ten) years replacement guarentee for prepaid meters installed under this contract except damage from water and fire, complete all as specified and directed.

Note : (a) Provision of the software for prepaid meters shall be the same OEM and developed in india only (Third Party software is not acceptable), meter working with both prepaid and post -paid technology. When data is not working due to any reason (like unpaid sim bill, network issue or any administrative issue) users can recharge the token automatically and manually in the meter keypad end to end solution provided by OEM of Meters. Third party / technology partner not allowed in any operations /stage. The system should have all possible payment / recharge modes, be it online and off line mode for officers convenience. System should have 2-3 options for every operation like token recharge in meter by cellular network bluetooth, RF, PLC must manually Officers not depend on smartphones for recharge of meter and for watch day to day meters data. User can check his mobile and on meter display like money balance, month wise unit monthly amount, voltage current PF, MD etc. The integration of software for servers and vending system shall be the responsibility of OEM, OEM has the option to provide additional server if he desire due to technical requirment without any extra cost to the department. However, no extra charge will be paid for connectivity to the server. OEM will be responsible for connectivity and smooth functioning with MES server without any hindrance. The server shall meet all standards as per international norms and indian IT Act rules. The server and relevent security ceretificate shall comply with all international Norms and standers certification.

Supply, installation, testing & commissioning of 3 phase, 4 wire Smart Prepaid energy meters BIS 16444 Marked in existing Meter Board /Floor Panel with Pre Payment shock Proof capacitive touch keypad (Similar as IOS and android phone technology), bluethoot, based Digital having current range 10-100Amp 415 Volt, accuracy class 1.0 along with inbuilt load control switch, containing provision fot TOD & RTC, inbuilt feature sense for data transfer (wireless without DCU, USB Pen drive) no other extra equipment required for data transfer, meter itself capable for data transfer) capable to define 4 tariff slabs, happy hour & holiday definition, when user go outside of the home, via mobile app user can decrease its sanctioned load, user can punch recharge token on meter keypad and manually and automatic via mpbile app, meter shuuld support the following data's -30 minutes instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and Max Demand. Meter Should have connect /Disconnect remotely, functionality operable for prepaid /post-paid billing software. The meter should support communication protocol NB IOT /DLMS with the software all as specified and directed. The manufacture or their service provider shall furnish 10 (Ten) years replacement guarentee for prepaid meters installed under this contract except damage from water and fire, complete all as specified and directed.

Note : (a) Provision of the software for prepaid meters shall be the same OEM and developed in india only (Third Party software is not acceptable), meter working with both prepaid and post -paid technology. When data is not working due to any reason (like unpaid sim bill, network issue or any administrative issue) users can recharge the token automatically and manually in the meter keypad end to end solution provided by OEM of Meters. Third party / technology partner not allowed in any operations /stage. The system should have all possible payment / recharge modes, be it online and off line mode for officers convenience. System should have 2-3 options for every operation like token recharge in meter by cellular network bluetooth, RF, PLC must manually Officers not depend on smartphones for recharge of meter and for watch day to day meters data. User can check his mobile and on meter display like money balance, month wise unit, monthly amount, voltage current PF, MD etc. The integration of software for servers and vending system shall be the responsibility of OEM, OEM has the option to provide additional server if he desire due to technical requirment without any extra cost to the department. However, no extra charge will be paid for connectivity to the server. OEM will be responsible for connectivity and smooth functioning with MES server without any hindrance. The server shall meet all standards as per international norms and indian IT Act rules. The server and relevent security ceretificate shall comply with all international Norms and standers certification.

Annual NB-IOT, GPRS SIM Charge

Annual Vending chargies per meter per year

Taking Down old meter of any size rating removing and handover E&M store as directed.

Provision of M-cube window based application for meter reading and configuration of meter. It shall have interactive user interface for meter data viewing and report genration for effective data management and automatic meter data expert facility. Along with CMRI (Common meter reading instrument ) complete all as specified and directed by Engr-in Charge. Note : Software should be from OEM not other entities or technology partner.

Provision of infrastructure for vending system like computer PC desktop with processor i-5 , 9 Genration, 8 GB RAM, hard disk - 1TB, 4-USB port including 18.5'' monitor of same make, keypad/mouse Make-HP/DELL/IBM/Equivalent with Licensed operating system (windows 10) along with 650 VA capacity UPS all as specified and directed.

Provision of print, copy, scan, wireless report printer with 12 Pages per minute capacity, 600x600 dpi with HP, REt, 1200 dpi effective output quality ( 600x600x2xdpi with REt with duty cycle 3000 single-sided pages per month for report printing complete as required. Make-HP Laser Jet 1020 or equivelent in canon, Epson and samsung printer all as specified.

Supply of impact token printer min 58 mm with serial /USB port having Thermal Receipt printer launch High speed printing 90mm/sec compatible with ESC /POS print commands set all as specified Make - Epson,Ovio,Cysno or equivalent as approved by GE.

Installation commissioning and implementation of vending system through server, mapping of consumers complete as directed. Note : The cost of vending charge for meter commissioned during progress of work shall deemed to be included in the rates.

M/L for submain wiring with under mentioned runs of S/C Pvc insulated but unsheathed FRLS Cable of specified size with multistrand copper conductor 1100Volt grade IS-694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked ( not less than 20mm dia ) along with fittings an accessories all fixed on surface of wall /ceiling or surface conduit wiring on wall /ceiling and also including the directed ( the under mentioned specified runs of single core cable and specified runs of earth continuity conductors and the relevent conduit with accessories shall be measured as one Length for the followings :-

(a) 4 run of 4 Sqmm Cable and 1 run of 6.0 sqmm cable connected to common earth complete all as sepcified and directed.

(b) 2 run of 4 Sqmm Cable and 1 run of 4.0 sqmm cable connected to common earth complete all as sepcified and directed.

Supply installation testing & commissioning of Polycarbonate Single phase meter box for outdoor type IP-66 with arrangement of fixing in meter box energy meter with front open for punching of recharge token complete all as specified and directed.

Supply installation testing & commissioning of Polycarbonate Three phase meter box for outdoor type IP-66 with arrangement of fixing in meter box energy meter with front open for punching of recharge token complete all as specified and directed.