REPAIRS TO ROADS AT MAKARPURA AND HARNI AREA AF STN VADODARA

Amount

M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm all as specified and as directed

M&L Preparation of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a tack coat with bituminous primer using paving bitumen VG-10 at the rare 5kg/10 sqm complete all as specified and directedcomplete all as specified and directed

M&L Premix bituminous, macadam (consolidated thickness) with 75mm thick or less 4% binder (paving bitumen VG-30) content by weight of total mix laid and rolled with 8-10 tonne Vibrator Power Roller to required gradient and camber complete all as specified and as directed. Note: (i) Cost of testing charges, material and transportation etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver complete all as specified and directed (iii) In case as per actual design mix, the binder content by weight of total mix is less than 4%, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder content as per design mix is more than 4%, no price adjustment shall be made for the same complete all as specified and directed

M&L Bituminous premixed semi dense asphaltic concrete (SDAC) 30mm thick consolidated thickness with 5.5 % paving bitumen (VG-30) as binder content by weight of total mix, using hot mix plant and mechanical paver a approved by GE, rolled and compacted with 8 to 10 tonne Vibrator Power Roller to required gradient and camber, complete all as specified and as directed. Note : (i) Job mix formula for the semi dense asphaltic concrete shall be got tested from the institutes specified in the particular specifications. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver. (iii) In case as per actual design mix, the binder content by weight of total mix is less than 5.5%, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder content as per design mix is more than 5.5%, no price adjustment shall be made for the same complete all as specified and directed

M&L Preparing bituminous surfaces of road and marking 2mm thick centre line, stop line, dashes, arrows, brackets etc. and the like on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and directed

S&F Cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplen reflector of Model DA 972.0 fixed with suitable size MS stud as per manufacturer's instructions complete all as specified

S&F Solar cat eye aluminium alloy (100% water proofing design according to BIS of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystaline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions etc. all as specified and directed

S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Dagli Engineers (BID ID -3126180)

Shree Vaishno Enterprises (BID ID -3134635)