ANNUAL RATE

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

1 line/cut patta. The white color marking should provide 1.00 smt

liminance coefficinet on cemend road shalll be min 130mcd/m2/lux and Asphalt road shall be

min 100 mcd/m2/lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two

years. (It.No-26161/Pg-237)

Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate and

ABS moulded body and reflective panels with Micro prismatic lens (No Glass bead lens)

capable of providing total internal reflection of the light entering

the lens face and shall support a load of 13635 kgs. tested in accordance to ASTM D

Type H and complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 Ð DO III Dt 11.06. 1997. The height, width and length shall not exceed

20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each side and

the slope to the base shall be 35 +/- 5 degree. The body of the marker should having finger

grip for easy and accurate placement and application with epoxy / bituminous Adhesive as

recommended by the manufacturer of the marker. The color

of the marker should be as per the IRC 35-2015 and as directed by Engineer-in-charge. (It.No-

Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as

per design of IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

3 from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in 1.00 No

black and white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting (It.No-26092B/Pg-198)

Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet

/ 4mm ACP (Aluminum composite Panel); size 80 x 60 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron

4 angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. 1.00 No

The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.(It.No-26093B/Pg-194)

Item Description Qty Unit

Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 60 cms. Dia Circle as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

5 painted with bestquality epoxy coatings in black and white bends. The details of symbol for 1.00 No

each board shall be as per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab

for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting.(It.No-26094B/Pg-196)

Item Description Qty Unit

STOP Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90 cms. Octagonal as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; qreflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

6 coatings in black and white bends. The details of symbol for each board shall be as per the 1.00 No

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete under the supervision of

engineer in charge.

A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting.(It.No-26095B/Pg-197\)

Parking Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size

size 60 x 60cms. sequare plus 60 x 20cms rectangular additional

plate as as per the design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x75 x 6mm / 65NB Circular

MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure(It.No-26096B/Pg-199)

Give Way Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting(It.No-26097B/Pg-200)

Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design

of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

report from third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting

Item Description Qty Unit

Distance Informatory / Destination Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 180x120 cms. rectangular as

per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x

5mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol

for each board shall be as per the instruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting (It.No-26099B/Pg-203)

Place Identification Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 150x90 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol

for each board shall be as per the instruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product shall be

submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting(It.No-26100B/Pg-205)

Village name Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 90x60 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand post of Iron Angle 75 x75 x 6mm / 65NB Circular

MS Pipe as required and frame

12 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted 1.00 No

with bestquality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each board shall beas per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab for the product

shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheetin.(gIt.No-26101B/Pg-206)

Hazard Marker Sign :-Providing and fixing sign boards made out of 1.5 mm aluminium sheet /

3 mm ACP (Aluminum composite

Panel); size 90x30 cms. rectangular as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching; coated withone coat of epoxy primer and

two coats of best quality epoxypaint ; reflectorised with High Intensity Prismatic Grade retro

refiective sheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr

long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

13 fabricated from suitable size iron angle of 35 x 35 x 3mm; paintedwith bestquality epoxy 1.00 No

coatings in black and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoorexposure test report from third party test lab

for the product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting (It.No-26102B/Pg-208)

Item Description Qty Unit

Men at work (2' x 2') sign :-Providing and fixing sign boards made

out of 1.5 mm aluminium sheet /3 mm ACP (Aluminum composite

Panel); size 60cmx60cm as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame

fabricated from suitable size iron angle of 50x50x5mm; painted

with bestquality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting (It.No-26105B/Pg-212)

Tree Guard sign :-Providing & fixing sign board made out of 2mm

aluminium sheet / 3mm ACP (Aluminum composite Panel) ,size

30cms diameter circle, pretreated with phospheting process and

acid etching, painted with one coat of epoxy primer and two

coats of best quality epoxy paint reflectorised with retro

15 reflective sheeting as per latest M.O.S.T. specifications. A 1.00 No

warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting. (It.No-

Railway crossing sign :-Providing and fixing sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle plus

90x30cm additonal plate as per design of IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic Grade

retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;

3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab

product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting (It.No-26110B/Pg-219)

Four (Two) LAne Ahead Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 120x120 cms. square plus 120x60cm

additonal plate as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4 mtr long stand post (2 Nos.) of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

17 frame fabricated from suitable size iron angle of 35 x 35 x 3mm; 1.00 No

painted with bestquality epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab

product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting.(It.No-26111B/Pg-220)

Item Description Qty Unit

Diversion Ahead Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum compositePanel); size 180x60 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.1 mtr long stand post (2 Nos.) of Iron Angle 50 x 50 x 5mm / 50NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x

18 3mm; painted with bestquality epoxy coatings in black and whitebends. The details of symbol 1.00 No

for each board shall be as per the instruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from offered shall be submitted by contractor. (B) ClassB Type-4 Retro Reflective

Kerb guard sign board (small) :-Providing & Fixing sign boards

made out of 2mm aluminium sheet, size 240 x 30 cms in U shape; as per the attached

drawing pre treated with phosphetingprocess & acid etching. coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; stand post and frame fabricated from iron angle of 50x50x5mm,

19 10mm sq. bar as required, painted with best quality epoxy coating the fixing at site shall be in 1.00 No

1:2:4 CC block of size 45 x 45x 60cms for each leg, including excavation curing etc. complete

under the supervision of engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab

for the product offered shall be submitted by contractor.(B) Class- B Type-4 Retro Reflective

sheeting.(It.No-26113B/Pg-223)

Around the Island / Road Direction Sign (Big) :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 180x60 cms. as per

design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting (It.No-26115B/Pg-226)

Providing & Fixing Jumbo Bollard Size 1.66 meter X 0.30 Meter as per the Design/ Drawing

attached (IRC) pre treated with phospheting process & acid etching. coated with one coat of

21 epoxy priemr and two coats of best quality epoxy paint reflectorised with retro reflective 1.00 No

sheeting as per latest M.O.S.T. 3.1m long stand post and frame fabricated etc. complete

under the supervision of engineer in charge.(B)High Intensity Grade ...........

Providing & Fixing Small Bollard Size 1.40 meter X 0.20 Meter as per the Design/ Drawing

attached (IRC) pre treated with phospheting process & acid etching. coated with one coat of

22 epoxy priemr and two coats of best quality epoxy paint reflectorised with retro reflective 1.00 No

sheeting as per latest M.O.S.T. 3.1m long stand post and frame fabricated etc. complete

under the supervision of engineer in charge.(B)High Intensity Grade ...........(M.R)

Providing and fixing speed limit sign boards made out of 2mm aluminium sheet; size 60cms.

dia circle as as per the attached drawing. pretreated with phospheting process &acid etching

coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.10m long stand post and

frame febricated from iron angele of 35 x 35 x3mm and 50 x50x5mm as required . Painted

with best quality epoxy coatings in black and white bends. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(B)High Intensity Grade(M.R)

Item Description Qty Unit

Solar Stud: suppling of solar raised pavement markers made of polycarbonate molded body

with circular shape,solar powerd ,LED self illumination on actve mode ,360 degree

illumination and reflective panels with micro prismatic lens capable of providng total internal

reflection of the lightn entering the lens face in passive mode. the marker shall support a load

of 20000 kg tested in accordance of ASTM D 4280. the marker should be resistant to dust and

water ingree according to IP 65 standard and should withstand temperatures in the range of

0c to 70 c.color of lighting could be provided in red or yellow (amber) as per requirements and

typical frequency of blinking is 1 Hz. ther should be current losses of less than 20 micron -

amperes at 2.4 v in sleep - charging mode to enchance the life of te marker and a full charge

should proovide for a inimum autonomy of 50 hours. the height width and length of the marker

shall not be less than 10mmx100mmx100mm. also the surface diameter of the marker shall

not exceed 0.5 kilogrames. fixing will be by drilling holes on the road for the shankes to go

inside,without nals and usign epoxy resin based adhesive as per manufacturee's

recommendation and complete as directed by the engineer in charge. (It.No-26167/Pg-240)

Supplying and fixing Solar Blinker runing time 24 Hrs made out Acrilo beautile sterine

injuction high compressed molding with reflector made of MMC (prismatic type of size

25 mm round ) solar panel size 60 cm x 45 cm fixing at site shall be in 1:2:4 CC block of size 45 1.00 No

X 45 X 60 cm for each leg including excavation curing etc complete under the supervision of

engineer in charge. (RA)

Providing and fixing Long Delinator Size 1.00 meter as per the design / drawing atteched (

IRC) pre treated with phospheting process & acid etching. coated with one coat of epoxy

26 priemr and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as 1.00 No

per latest M.O.S.T.specifications stand post and frame fabricated etc. complete under the

supervision of engineer in charge.(B)High Intensity Grade ...........(M.R)

Providing and fixing small Delinator Size 0.30 meter as per the design / drawing atteched (

IRC) pre treated with phospheting process & acid etching. coated with one coat of epoxy

27 priemr and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as 1.00 No

per latest M.O.S.T.specifications stand post and frame fabricated etc. complete under the

supervision of engineer in charge.(B)High Intensity Grade ...........(M.R)

Solar mobile signing trailor ( with changing message panel model No. SSt 101) Trailor Trolly

28 2400 X 1800 X 1200 mm solar panel 2 Nos size 90 X 60 & 4 Nos. Tyre & 10 message with 1.00 No

remote control etc. comp under the supervision of Engineer in charge. (M.R)

29 Providing and supplying safety Cone ( TCN 3875 - 01 N Size 380 X 55 X 750) (M.R) 1.00 No

30 Providing & Supplying Safety Jacket.(M.R) 1.00 No

Providing and supplying Road barrier Size 1000 X 350 X750 standarrd colours Red , White

Yellow etc. Complete. (M.R)

32 Providing & Supplying caution tap. ( 200 Rmt)(M.R) 1.00 No

Painting lines, deashes, arrows, letters etc on roads, air fields and like two coats with road

33 marking paint, brushing including cleaning the surface of all dirt, dust and other foreign 1.00 Smt

Chevron sign: Providing and fixing sign boards Made out of 1.5 mm alluminium sheet/ 3 mm

ACP (Aluminum composite Panel) ; size 60 x 50 Cms. as per design of IRC-67-2012, Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised with Micro Prismatic Grade retro refiective

sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.3 mtr long (1-

Nos) Stand post of 75 x 75 x 6mm / 65 NB circular dia MS pipe as required and frame

fabricated either from suitable size iron angle of 50x50x5mm ; painted with best quality epoxy

coatings in black and white bends. the details of symbole or instruction / numerals for each

board shall be as per the instruction of engineer in charge.The fixing at site shall be in 1:2:4

C.C. block of size 45 x 45 x 60Cms. for each leg. including excavation, curing etc. complete

under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor (A) Classs -C

Type -11 Retro Reflective sheeting (It.No-26170/Pg-241)

Providing and fixing "W" metal beam crash barrier comprisign of 3 mm thick corrugated

sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical

post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road

level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to

35 IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel 1.00 Rmt

section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 including foundation

cement concrete M-15. of size 450mm X 450mm X 1200 mm oil painting in three coats to

Post, Spacer etc & Zinc Coating i.e.galvanizing @ 0.55 Kg / Sqmt minimum spoot after

fabrication etc.complete.

Item Description Qty Unit

Repairing erecting "W" metal beam crash barrier comprisign of 3 mm thick corrugated sheet

metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post,

150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all

steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367

36 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 1.00 Rmt

150 x 75 x 5 mm, 330 mm long complete as per clause 810 including foundation cement

concrete M-15. of size 450mm X 450mm X 1200 mm oil painting in three coats to Post,

Spacer etc & Zinc Coating i.e.galvanizing @ 0.55 Kg / Sqmt minimum spoot after fabrication

Median Marker : Providing and Fixing of Flexible Median Marker that are made of tough, high

impact, Injection-moulded, thermoplastic body with property of flexibility to provide high

durability. The dimension of Flexible Median Marker should not exceed 18 Cm in height (

including shank height), 12.5 cm width, 0.65 cm thickness and shank depth shall be 3.4 cm

The body structure shall be rounded at all its corner and edges. The Plastic used for molding

the Flexible Median Marker should survive impact load of 5 kg continuously for 750 times at

room temperature. The logo of the manufacture shall be embossed on either side of the body

37 in the injection moldeing process. The median Marker shall have Flame like shaped body 1.00 No

with, fluorescent yellow colour retro-reflective sheeting of size not less than 90 cm square,

with fully reflective micro prismatic cube corner as its retro-reflective elements as per IRC

2012 and ASTM D4956-09 type XI specifications reflectivity values. The retro- reflective

sheeting shall be one or both sides of Flexible Median MArker and Shall be edge protected

with no exposed edges which will prevent edge lifting,vandalism,sheeting damage, etc. The

Flexible Median Marker shall be fixed by a combination of epoxy adhesive and grouting as

recommended by manufacturer and Engineer in charge. (It.No-26164/Pg-239)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade Board using 2mm

Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm. Descaling and degreasing the board as per

requirement using epoxy reflactive process by screen painting as directed

etc. complete including transporting and fixing in C.C. 1:2:4 with necessary excavation curing

etc. complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

contractor. (B)Class B Type-4(MDR/ODR) retro reflective sheeting (It.No-26091B/Pg-192)

Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary

39 reinforcement as per I.R.C. type design in C.C. 1:4:8 including letter and paints etc. 1.00 Each

complete (It.No-26048/Pg-186)

Providing and fixing Hectometer as per I.R.C. type design including painting, lettering etc.

complete.(i) Fixing in Earth (It.No26044A/Pg-186)

Providing and fixing Hectometer as per I.R.C. type design

including painting, lettering etc. complete.(ii) Fixing in C.C.1:5:10 (It.No26044B/Pg-186)

Providing and fixing guard stone as per I.R.C. type design

including white washing etc. complete.(i) Fixing in Earth (It.No26045A/Pg-186)

Providing and fixing guard stone as per I.R.C. type design including white washing etc.

complete.(ii) Fixing in C.C. 1:5:10 (It.No26045B/Pg-186)

Dismentaling crash barrier & vertical post including all earth work concrete in base and

44 making good the disturbed ground stacking useful materials as directed and disposing of the 1.00 Rmt

unserviceable materials with all lead and lift.

Providing and erecting a 'W' Metal Beam Crash Barrier comprising of 3 mm thick corrugated

sheet metal beam rail, 110 cm deck slab / road level, fixed on ISMC series channel vertical

post 150 x 75 x 5 mm space 1.5m center to center, fixing on slab with 16mm thick base plate

using 20mm dia., 6 Nos., 4.6 grade anchor bolts (HILTI) of required length and 2 Nos. of

12mm thick stiffener plate. All steel parts and fitments to be galvanized by hot dip process, all

fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with

a spacer of section 150 x 75 x 5 mm, 330 mm long and wedling of every nut bolts with

spacers etc complete as per MORTH Clause 810. Rates including providing and fixing 3M

ACM type reflector, 100mm wide, Type-4, class-B, High Intensity grade sheeting between two

"W" metal beam through and reflective unit at the top of vertical post as per IRC 67-2012 etc.

complete as per detailed drawing and directed by Engineer in charge. (Metal beam crash

barrier for Bridge portion).

Cat Eye / Road Stud / RPM: Supplying of Raised Pavement Markers made of polycarbonate

and ABS moulded body and reflective panels with Micro prismatic lens (No Glass bead lens)

capable of providing total internal reflection of the light entering the lens face and shall

support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 - DO III Dt 11.06.

46 1997. The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with 1.00 No

minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/-

degree. The body of the marker should having finger grip for easy and accurate placement

and application with epoxy / bituminous Adhesive as recommended by the manufacturer of

the marker. The colour of the marker should be as per the IRC 35-2015 and as directed by

Engineer-in charge.

Item Description Qty Unit

Supplying, Fitting and Fixing Rainforced Cement Precast Speed Breaker on Various Spot as

47 per Engineer in Charge in Yellow and Black Colour with required cement slurry, digging and 1.00 Rmt

fixing. Load Capacity 65 tonne.crack resistance and Size 500x400x75mm etc complete.

Repairing of sign bords such as Tilting, Braking, welding work and fixing in Concrete including

48 all type of materials,tools and equipments with man power, transportation, machinary etc 1.00 No

complete as per directions of Engineer in charge.(Single Lagged sign Board)

Repairing of sign bords such as Tilting, Braking, welding work and fixing in Concrete including

49 all type of materials,tools and equipments with man power, transportation, machinary etc 1.00 No

complete as per directions of Engineer in charge.(Two Lagged sign board)

(1) Rate Applicable for all Tenderer

(2) Rate Approved with all Texes

(3) Deduction should be made as per Government rules