Providing and fixing Fire Fighting System Adarsh Nivashi School Building, Boys Hostel Building, Staff Quarters and Dining Hall at Umargot, Tal.Umarpada, Dist.Surat.

Name of Work :- Providing and fixing Fire Fighting System Adarsh Nivashi School Building, Boys Hostel Building,

Staff Quarters and Dining Hall at Umargot, Tal.Umarpada, Dist.Surat.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

1 Supply. installation, testing & commissioning of ISI approved electrical 4.00 Nos. 98432.21

motor driven jockey pump set having 10.8 m3/hr. @ 70m head. The pump

unit shall be a horizontally direct mounted motor. Unit shall comprise the

following minimum requirements: a) Pump, b) Electric motor IE2, c)

Foundation bolts, d) Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with labour.

2 Supply, installation, testing & commissioning of Priming tank, HDPE 4.00 Nos. 25677.97

type, 1000 litres, with necessary piping 100 mm size, G.I pipe for priming

the pumps, pipe of with butterfly valves for isolation, Water Filling to

priming tank by piping min. 50 mm size, with all complete.

3 Supply, installation, testing & commissioning of Manifold( surge 1.00 No. 55635.60

vessel,)for fire hydrant system, min. 300 mm diameter, made from M.S

plate, hydro tested to 15 kg./cm2. with ball valves, header with couplings

for fitting pressure switches, pressure gauges etc.with necessary isolation

valves with all complete.

4 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 100.00 Mtr 398.01

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 25 mm dia.

5 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 175.00 Mtr 641.95

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 50 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

6 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 250.00 Mtr 1176.90

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 80 mm dia.

7 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 650.00 Mtr 1690.47

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 100 mm dia.

8 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 550.00 Mtr 2525.00

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 150 mm dia.

9 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 35.00 Mtr 3423.73

piping, conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc. Painting for piping, fittings & structural

pipe support, shall be two coat of zinc primer and two coats of fire red

conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 200 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

10 Supply, installtion, testing & commissioing of Underground GI (ERW) 50.00 Mtr 2020.00

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of

size 150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday

testing . Rates shall include sand bedding of 75mm dia all around,

backfilling of the excavated including installation of heavy pipe fitting's,

flanges, etc. 10 % of all the welded joints shall be done radiographically

tested and 50% of the joints radiographed shall be the "Field Joints".

Hydrostatic testing for 2 hours at 150% of the system pressure, hook-up

etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in-Charge, with all complete.

(Road Crossing) 100 mm dia.

11 Supply, installtion, testing & commissioing of Underground GI (ERW) 25.00 Mtr 3047.12

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of

size 150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday

testing . Rates shall include sand bedding of 75mm dia all around,

backfilling of the excavated including installation of heavy pipe fitting's,

flanges, etc. 10 % of all the welded joints shall be done radiographically

tested and 50% of the joints radiographed shall be the "Field Joints".

Hydrostatic testing for 2 hours at 150% of the system pressure, hook-up

etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in-Charge, with all complete.

(Road Crossing) 150 mm dia.

12 Design, Supply and installation of Safety Signage made of Zinc Sulphilde 25000.00 Sq. inch 9.41

based glow in dark, Rigid sheet with High Luminous property enclosed in

a transperent weather proof UV stabilized plastic pasted on 3 mm thick

clear acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE

LIFT DURING FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT, FIRE ALARM CALL POINT, FIRE HOSE REEL, FIRE

HYDRANT POINT etc.

13 Supply, Installtion, Testing & Commissioing of Standard Response 20.00 Nos. 556.36

Sprinkler, Pendent Brass Sprinkler, Quartzoid Bulb type with crome

finish, nickel crome platde, K factor K-80, Temp.- 680C, 1/2" end

connection including resessed escutcheon. (UL Listed).

14 Supply, installation, testing & commissioning of pressure switch. (Range 7.00 Nos. 2824.58

15 Supply, installation, testing & commissioning of 150 mm dia. dial 10.00 Nos. 2738.98

Burdon Type Glycerine Filled pressure gauge with isolation ball valve

arrangements with necessary isolation valves with all complete.( Range

16 Supply, installation, testing & commissioning of Cast iron body double 4.00 Nos. 5905.93

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. 50 mm dia.

17 Supply, installation, testing & commissioning of Cast iron body double 3.00 Nos. 8182.71

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. 80 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

18 Supply, installation, testing & commissioning of Cast iron body double 3.00 Nos. 10271.18

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. 100 mm dia.

19 Supply, installation, testing & commissioning of Cast iron body double 2.00 Nos. 15920.34

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. 150 mm dia.

20 Supply, Installation, Testing & Commissioning of Cast iron body 10.00 Nos. 2011.45

Butterfly valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm

dia. & below Lever operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with bolts & nuts

washers, rubber gaskets 3 mm thick, etc., with all complete. 50 mm dia.

21 Supply, Installation, Testing & Commissioning of Cast iron body 6.00 Nos. 2567.79

Butterfly valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm

dia. & below Lever operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with bolts & nuts

washers, rubber gaskets 3 mm thick, etc., with all complete. 80 mm dia.

22 Supply, Installation, Testing & Commissioning of Cast iron body 6.00 Nos. 3124.15

Butterfly valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm

dia. & below Lever operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with bolts & nuts

washers, rubber gaskets 3 mm thick, etc., with all complete. 100 mm dia.

23 Supply, Installation, Testing & Commissioning of Cast iron body 5.00 Nos. 4493.64

Butterfly valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm

dia. & below Lever operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with bolts & nuts

washers, rubber gaskets 3 mm thick, etc., with all complete. 150 mm dia.

24 Supply, installation, testing & commissioning of Cast iron body Dual 5.00 Nos. 1540.67

Plate Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 50 mm dia.

25 Supply, installation, testing & commissioning of Cast iron body Dual 3.00 Nos. 2225.42

Plate Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 80 mm dia.

26 Supply, installation, testing & commissioning of Cast iron body Dual 3.00 Nos. 3166.95

Plate Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 100 mm dia.

27 Supply, installation, testing & commissioning of Cast iron body Dual 2.00 Nos. 5820.34

Plate Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 150 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

28 Supply, installation, testing & commissioning of SG iron body 2.00 Nos. 1112.71

SinglePlate Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete

with mating Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 50 mm dia.

29 Supply, installation, testing & commissioning of SG iron body SinglePlate 3.00 Nos. 1455.09

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories 80 mm dia.

30 Supply, installation, testing & commissioning of SG iron body SinglePlate 3.00 Nos. 1797.46

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories 100 mm dia.

31 Supply, installation, testing & commissioning of Y Type Strainer 2.00 Nos. 5563.55

complete with mating flanges with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete accessories. 80 mm dia.

32 Supply, installation, testing & commissioning of Y Type Strainer 3.00 Nos. 7275.42

complete with mating flanges with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete accessories. 100 mm dia.

33 Supply, installation, testing & commissioning of Y Type Strainer 2.00 Nos. 11555.09

complete with mating flanges with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete accessories. 150 mm dia.

34 Supply, installing, testing and commissioning of Normax make CI heavy 2.00 Nos. 4194.07

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 80 mm dia.

35 Supply, installing, testing and commissioning of Normax make CI heavy 3.00 Nos. 6162.71

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 100 mm dia.

36 Supply, installing, testing and commissioning of Normax make CI heavy 1.00 No. 12411.02

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 150 mm dia.

37 Supply, installation, testing & commissioning of Four way fire brigade 1.00 No. 8987.29

Inlet connection with 63 mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each inlet with 150 mm dia.

header pipe, suitable rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all complete.

38 Supply, installation, testing & commissioning of Two way fire brigade 4.00 Nos. 5135.60

Inlet connection with 63 mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each inlet with 100 mm dia.

header pipe, suitable rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all complete.

39 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 20.00 Nos. 1027.12

gauge G.I Sheet with extra handle at bottom duly painted white inside and

Red out side with FIRE mark. Filled with dry-sand and kept on existing

stand provided or hung on wall hook.

40 Supplying and erecting floor mounting Stand for keeping four nos. of 5.00 Nos. 5563.55

FIRE buckets comprising 1500 mm in length, 900 mm height frame made

out of 30mm x 30 mm x 4 mm angle iron with cross supports legs, welded

with 4 hooks and duly painted with one coat of primer and two coats of

approved enamel P O red paint.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

41 Supply & installation of stainless steel body Orifice Plate of suitable inner 50.00 Nos. 1069.91

bore along with matching flange - as per specification & requirement as

per hydraulic calculation.

42 Providing and fixing approved make Perforated C type cable tray. Made 50.00 Mtr 471.67

from pre- galvanized sheet steel. The cable tray should be bended as per

IS 2062/1079 with max 17.5% perforation with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer in

charge..(5) 300 X 50 X 1.5 mm Thick

43 Providing and fixing approved make Perforated C type cable tray. Made 50.00 Mtr 322.19

from pre- galvanized sheet steel. The cable tray should be bended as per

IS 2062/1079 with max 17.5% perforation with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer in

charge..(3) 150 X 50 X 1.5 mm Thick

44 Supply, installation, testing & commissioning of Oblique pattern type 50.00 Nos. 5435.17

stainless steel (SS 304) single headed External Fire Hydrant Valve with

mm dia. female instantaneous outlet conf. to IS: 5290, type - A, including

mating flanges, galvanised nuts, galvanised bolts/studs, washers & gaskets

3 mm thick with all complete.

45 Supply, installation, testing & commissioning of 63 mm dia. stainless steel 50.00 Nos. 1754.66

(SS 304) Universal Branch Pipe conf. to IS:

46 Supply & installation, testing & commissioing of Fire Fighting Hose - 50.00 Nos. 6967.29

conf. to IS : 636, type B (type- 3), The fire hose shall be 15 m long with

63 mm dia. stainless steel (SS 304) couplings conf. to IS: 903, at both the

ends for connection with the hydrant valve and the branch pipe.

47 Supply, installation, testing & commissioning of fabricated from 3 mm 50.00 Nos. 2525.00

MS sheet, hose box of size-450 mm x 600 mm x 250 mm - painted with

Fire Red as per IS: 5, shade no. 536 front 3 mm thick transparent glass

with lock & key, handle and brass hinges - to accommodate one number of

15 mtr long hose and one number of universal branch pipe, including

supporting arrangement with civil work.

48 Supply, Installation, testing & commissioing of Swinging type mild steel 50.00 Nos. 7403.82

hose reel drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the hose shall be fitted with a SS

shut-off nozzle & SS ball valve of 25 mm dia. including supporting

arrangement with all complete. accessories

49 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread) 60.00 Nos. 706.14

50 Supplying, fixing & testing of New Battery of diesel engine 150 Amp. 1.00 No. 15834.75

51 Supply and installation of Diesel Tank For Diesel Engine With All 1.00 No. 16690.67

Accessories 100 Ltrs.

52 Supplying, filling & testing lube oil for diesel engine 50.00 Ltrs. 320.98

53 Supply and commissioning of Oil Filter. 1.00 No. 706.14

54 Supplying, filling of diesel in diesel engine tank 100.00 Ltrs. 89.87

55 Supply and commissioning of Diesel Filter 1.00 No. 427.97

56 Supplying, filling & testing coolant to engine cooling for radiator 30.00 Ltrs. 239.66

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

57 Excavation for foundation upto 1.5 m depth including sorting out and 15.00 Cu. Mtr 122.94

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

58 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and 77.00 Nos. 299.58

59 Steel work, welded in built up sections framed work including cutting, 9000.00 Kgs. 91.08

hoisting, fixing in position and applying a priming coat of read lead paint

& two coat oil paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like.

60 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 200.00 Mtr 136.35

1.1 KV grade to be erected as directed of following size. (E) 3 core

Sq. mm for pressure switch

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 180.00 Mtr 285.83

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire Pump) (B) 3 core 4 Sq.

62 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 150.00 Mtr 497.93

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire Pump) (D) 3 core 10 Sq.

mm (Only Fire Panel to Fire Pump)

63 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 75.00 Mtr 213.11

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of

following size of cable for Diesel Engine Battery Charger (A) 3 core

64 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 60.00 Nos. 1968.64

6 Kg. Capacity as per IS:15683 & IS :

65 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 60.00 Nos. 5520.76

Capacity 4.5 Kg. (conforming to IS-15683).

66 Supply, Filling and Fixing of approved make ABC Moduler type 20.00 Nos. 3423.73

automatic fire extinguisher Capacity 5 Kg. (conforming to IS-15683).

67 Submitting the application to obtain Fire Plan Approval and After 4.00 Nos. 101000.00

Completion of Work Obtain Final Fire NOC for 3 Year.

68 Supply, Installation and commissioning of Air Release Valve, 25 mm Dia. 5.00 Nos. 1412.29

69 Supply, Installation and commissioning of Fire Alarm Panel Conventional 4.00 Nos. 21398.30

type, 4 zone, with complete accessories.

70 Supply, Installation and commissioning of smoke detectors / heat 50.00 Nos. 1027.12

detectors, with complete accessories.

71 Supply, Installation and commissioning of plug in base for the smoke 50.00 Nos. 256.78

detectors, hooters, with complete accessories.

72 Supply, Installation and commissioning of Audio hooters , with complete 50.00 Nos. 1069.91

73 Supply, Installation and commissioning of Manual Call Points, with 50.00 Nos. 1010.00

complete accessories.

74 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 3500.00 Mtr 176.75

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 2 core 2.5 Sq. mm for Fire Alarm System.

75 Core cutting in wall and in RCC slab with size as below: 50 mm dia. Hole 30.00 Nos. 342.37

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

76 Core cutting in wall and in RCC slab with size as below: 80 mm dia. Hole 7.00 Nos. 427.97

77 Core cutting in wall and in RCC slab with size as below: 100 mm dia. 25.00 Nos. 513.55

78 Core cutting in wall and in RCC slab with size as below: 150 mm dia. 10.00 Nos. 599.15

79 Core cutting in wall and in RCC slab with size as below: 200 mm dia. 5.00 Nos. 855.93

80 Supply, installation, testing & commissioning of ISI approved electrical 1.00 Set 204995.76

motor operated Kirloskar make fire hydrant main pump set horizontal end

suction back pull out top discharge centrifugal fire pump set with all the

standard acessories, base frame, coupling, and foundation bolts with

following specifications Model -DB 80/26, Flow-137 m3/hr, Head-70

meter, Motor Rating -45KW/60HP/3 ph Suc x Del - 100 x

81 Supplying, Installation, Testing and commissioning of Kirloskar make 1.00 Set 447652.54

diesel engine driven fire hydrant pump set suitable for automatic operation

and consisting of following: horizontal type, centrifugal end suction back

pull out, top discharge pump of cast iron body & bronze impeller with

m.s.fabricated common base plate, coupling, coupling guard, foundation

bolts etc. as required. Model -KFE Flow-137 m3/hr, Head-70 meter,

Engine - 62 HP / 3 ph Suc x Del - 125 x

82 Fire Hydrant Panel suitable for 10 hp Jockey pump, 60 hp (137 m3/hr @ 4.00 Nos. 101000.00

70 m head) main electrical pump and 62 hp (137 m3/hr @ 70 m head)

Diesel engine operated pump A) Incomer MCCB - 1 Nos R Y B

Indication - 1 Set VAF Digital Meter - 1 Set B) Outgoing F1 60 HP Star

Delta Starter - 1 For Main pump F2 10 HP DOL Starter - 1 For Jockey

Pump F3 Auto - On / Off Diesel Pump With Battery Charger

Control Circuit With Auto - Manual On/Off Trip Indication

On/Off Push Button C) Fabrication Dully Powder Coated PO Red Colour,

Fabricated From 14/16 SWG,GI Sheet, IP-42 Protection,-Fixed Type

Floor Mounted Cable Entry : Bottom

83 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and 13300.00 Sq.mt 8.08

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the

estimated rate mentioned above.

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

1 which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

4 design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5 GST will be paid Extra as per Govt. amendment

Signature of Bidder Depuy Executive Engineer

Mandvi (R&B) Sub Division,

Executive Engineer

Surat (R&B) Division No.2,