SPECIAL REPAIR TO BLDG NO P-86/01 (GROUND FLOOR) SINGLE OFFRS ACCN OF AD REGT AT DHOLEWAL MIL COMPLEX UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).

Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition)

M&L for reinforced Cement Concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) in Beam, Cantilever, lintel beam etc.

Use and waste rough finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Use and waste rough finished Form work to edges of concrete floor and roofs and similar work exceeding 5 Cm but not exceeding 10 Cm wide.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality

Dismantling of stone slabs and tiles of any description or thichness in floors aprons etc laid bedded and pointed in any mortar complete all as specified & directed by Engineer-in- charge.

M&L for granite slab 20 mm thick (table rubbed and polished) as in in steps, jambs,pillars, window-cill, cooking platform over and including 20mm thick bedding layer in cement mortar (1:4) in and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for vitrified ceramic dark shade coloured tiles 8-10mm thick square/rectungular polished area of each tile area exc 0.42 Sqm not exceeding 1.0 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of CM 1:6 complete all as secified.

All as per item No 10 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

M&L for non skid joint free ceramic coloured tiles (Ist quailty) 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured/ printed tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 20 mm graded stone aggr.as in sub flooring rough finished surface complete all as spd and directed.

Demolition of brickwork built in cement or cement lime mortar incl all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified

All as per item No 16 but except bricks

Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame).

Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing in the same opening after easing and minor adjustment.

S&F for aluminium Powder coated of any colour anodised frame for doors, windows, ventilator, with one or more rebates incl joining cleat for fixing etc.comlete all as specified.

S&F for anodised Powder coated of any colour Aluminium door shutters, aluminium section weighing 0.55Kg/m incl necessary jointing cleats,glazing clips,ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F for anodised Powder coated of any colour Aluminium windows and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55Kg/m incl necessary jointing cleats,glazing clips,ruber neoprene packing, anodised aluminium fittings such as peg stay 150mm long(1no), hinges type B-21 100mm long(2 No) suitable handle(01 no) complete all as specified.

S&F in repair 4 Levers Brass Mortice lock, vertical type, of size 100mm.

S&F for 5.5mm thick sheet glass ordinary quality & glazing in Aluminium door with neoprine rubber and frosted on one side in squares exc. 0.5 sqm each pane.

S&F for 5.5mm thick sheet glass ordinary quality & glazing in Aluminium door with neoprine rubber and solar control files 50 mocron in squares n. exc. 0.5 sqm each pane.

S&F for PVC wall lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge.

S&F in repairs door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F for aluminium handles anodised cast type 150mm long all as specified & directed by Engineer-in-charge.

Supply and fixing for extruded Aluminium type B-21 butt hinge 100 mm long.

Dismantling of wall and ceiling boards ( fibre,pulp,insulation,etc ) or insulation boards /slabs/blankets any thickness incl cover fillets complete all as spd.

M&L for soild PVC wall linning vonsisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawings

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawings

S&F in repairs pre-laminated (both sides) particle board 18/19mm thick with decorative choice laminations, interior grade, fixed with screws to timber frame work.

S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store.'

All as per item No 37 but 20mm bore.

S&F for 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

All as per item No 39 but 20mm bore.

Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore.

All as per above item No 41 but 20mm bore.

S&F in repairs floor mounted coupled vitreous china water closet of size 365x630x750mm with UF soft close seat cover, Hinges, fixing accessories set , P-trap,Cistern with complete fittings, including making, etc complete including making goood to floor etc complete all as specified and as directed (Make :JAQUAR Cat pt. FNS-WHT-40751P or equivalent as approved.

S&F in repair vitreous china counter top Wash Basin, size 500x420x190mm incl incl 32mm bore waste fitting (Make :JAQUAR Cat pt. FNS-WHT-40931 or equivalent as approved.

S& F in repair bottle trap including jointing to waste pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair brass CP wall mixer 3 in 1 system with provision of both Hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flanges all as specified. (Make :JAQUAR Cat pt. OPP-15125PM or equivalent as approved.

S&F for chromium plated Hand Shower dia 105mm round shape Multi Flow with air effectand fix in repairs (Make :JAQUAR Cat pt. HSH-1721 or equivalent as approved.

S&F for chromium plated Single lever Basin Mixer without popup waste with 450mm long Braided Hoses incl fixing to steel pipe in repairs (Make :JAQUAR Cat pt. OPP-15011BPM or equivalent as approved.

S&F for chromium plated 2 Way Bib cock with flange incl fixing to steel pipe in repairs (Make :JAQUAR Cat pt. OPP-15041PM or equivalent as approved).

S&F for chromium plated Angular Stop Cock with flange incl fixing to steel pipe in repairs (Make :JAQUAR Cat pt. OPP-15053PM or equivalent as approved .

S&F for chromium plated overhead shower roses, size 150 dia round shape Single flow with self cleaning function incl fixing to steel pipe in repairs (Make-JAQUAR Cat pt. OHS-1801 or equivalent as approved.

S&F for soap dish Holder fixed to walls with chromium plated brass screws.(Make- JAQUAR Cat pt. CAN-1131N or equivalent as approved )

S&F for CP Jet spray suitable for Europian western commode (EWC) including PVC connection 15mm size with PTMT nuts and washer, of length 900mm. ( Make: prayag Cat no. pat No. BEA 17 or equivalent as approved)

S&F for toilet paper holder of CP with SS Flap fixed to walls with chromium plated brass screws.(Make- JAQUAR Cat pt. AKP-35753PS or equivalent as approved)

S&F in repairs brass chromium plated tubular towel rack. (Make-JAQUAR Cat pt. AKP-1181S or equivalent as approved )

Supply & fixing for lass self assembly with stainless steel frame Corner glass shelf etc. (Make-JAQUAR Cat pt. AKP-1173 or equivalent as approved)

S&F in repairs brass chromium Towel Ring Round. (Make-JAQUAR Cat pt. AKP-7721 or equivalent as approved)

Supply & fixing for glass self assembly with stainless steel frame 550mm long etc. (Make-JAQUAR Cat pt. AKP-7771 or equivalent as approved )

S&F for 15mm bore chromium plated Bib Cock with wall flange fixed in repairs. (Make- JAQUAR Cat pt. OPP-15037PM or equivalent as approved )

S&F for 450mm long Braided Hose with two 15mm Nuts & rubber Washer without Nipple. (Make- JAQUAR Cat pt. ALD-805B or equivalent as approved)

S&F for CP health faucet with 8mm dia, 1.20 mtr long Flexible tube & wall Hook.(Make- JAQUAR Cat pt. ALD-573 or equivalent as approved )

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm complate all as specified and directed. make : Prayag and equvalent."

S&F for 5.5mm thick looking mirror including frame of size 1200x600 mm. (Make - Modi guard or equivalent as approved)

S&f in repair chromium plated grating 125mm dia circular of approved make and fixing with cement Concrete 1:2:4 on nahani trap or floor trap complete, all as specified & directed.

S&F for 75mm bore cast iron soil, waste and vent pipe, ( Sand cast pipes ) in any length with or without ears, with cement joints, laid in trenches or in floors

S&F for 75mm bore cast iron cowls all as specified & directed.

M&L for 75mm dia cast iron floor trap with grating incl jointing to waste pipe with run lead joint and embedde in cement concrete (1:2:4) type B0-1 using graded stoe agg complet all as specified and directed.

Supply & fixing in repair curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm,PVC coated and colour / Pattern over all dia 28 to 29mm including taking down existing curtain rod complete all as specified and directed .

Supply & fixing in repair plastic finial of 28 to 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed. Make: Aerolux/MEC or VISTA

Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engineer-in-charge.

M&L for rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for rendering 5mm thick on in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge

M&L for preparing newly plastered or pointed surface of wall / ceiling and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all asspecified & directed by Engineer-in-charge.

M&L for complete removal of existing treatment on wall / Ceiling and applying two coats of oil bound distemper over one coat of Birla wall care putty priming coat preparatory to distempering all as specified & directed by Engineer-in- charge.

M&L for prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge.

Preparation of new surfaces of wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

All as per above item No 78 but two coats of synthetic enamelled paint of new surface of steel.

M&L for framed work as in doors orgates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening andfixing complete (Fe410-W Gde E-250 Quality-A)

Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only ceiling fan and connecting up including provision sutiable of new down rod for ceiling fans,of cable from celling rose/ connector to fan incl painting all as specified and as directed.

M &L for point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete concealed in walls(on surface in ceiling/beam etc.) including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete with all accessories/fittings and MS box thickness not less than 1.2 mm covered with 3mm thick plastic laminated hard glass surface sheet cover concealed in wall with screw and washers all as specified and as directed for the following :-

One light/fan/call bell point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board

One 3 Pin socket outlet , 5 Amps on the same board with other switch

All as per item No. 84 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed.

Supply and fix for wall decorative LED light fittings 10watt higher energy saving decorative LED lighting fixture enviromental friendly, energy efficient complete all as specified and directed. Make:- Crompton/Havells/Bajaj/Philips

Supply and fix for LED tube light fittings 1200 mm, 20W, 240V, 50Hz, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed. Make:- Crompton/Havells/Bajaj/Philips

Supply and fix for LED tube light fittings 600 mm, 10W, 240V, 50Hz, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed. Make:- Crompton/Havells/Bajaj/Philips

Supply & fix for exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed. Make:- Havells/Crompton/Bajaj

M & L for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed .

M & L for sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed .

Supply and fix for sheet metal enclosure with socket plug top and MCB SPN 20 Amp with enclosure with a two pin and earth plug and socket complete all as specified

Supply and fix for VTPN MCB DB 12 ways ,Double door with 415 Amps, Double door type complete all as specified and as directed .

Supply and fix for MCCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-16 kA complete all as specified and as directed .

Supply and fix for SPN MCB DB 12 ways with 200 Amps rated bus bar 240Volt, Double door type all as specified

Supply and fixing for MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.

Supply and fixing for MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed

S&F for ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed

S&F for switch Modular 6A single pole, one way, 1 module complete all as specified and as directed

S&F for switch Modular 16A single pole, one way, 1 module complete all as specified and as directed

S&F for socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed

S&F for socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed

S&F for modular White cover plate with frame,12 module complete all as specified and as directed

S&F for modular White cover plate with frame,8 module complete all as specified and as directed

S&F for modular White cover plate with frame,4 module complete all as specified and as directed

S&F for modular White cover plate with frame,3 module complete all as specified and as directed

S&F for modular White cover plate with frame,2 module complete all as specified and as directed

S&F for modular Metal flush box 12 module complete all as specified and as directed

S&F for modular Metal flush box 8 module complete all as specified and as directed

S&F for modular Metal flush box 4 module complete all as specified and as directed

S&F for modular Metal flush box 3 module complete all as specified and as directed

S&F for modular Metal flush box 2 module complete all as specified and as directed

S&F for calling bell , AC, 230 Volts, single pole complete all as specified and as directed

S&F for fan step regulator, 120W 2 module complete all as specified and as directed

M &L for earthing incl earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Taking down of XLPE cable any size complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified

Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed

Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. Note:- The thickness 18 cm punned down shall be considerd for mesurement)

M & L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

Taking down of any size of bldy security light fittings complete all as specified and directed.

Supply and fixing for bldg security light fitting LED 30 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. IP66 with high power LED lamp incl with suitable size of bracket compete all as specified and directed.