Karnataka

AOC

Works

Canals including Lining and Structures

DIVERSION OF YENNEHOLE LEFT BANK CANAL AT KPTCL 2x500 MVA, 400/200 KV SUB STATION AT KADAKOLA, IN MYSURU TALUK & DISTRICT.

Cauvery Neeravari Nigam Limited

CNNL No 2 VCC Div Mysore | Karnataka

Amount: ₹3.5 CrCloses: 3 Jan 2026Closed

Timeline

Published26 Dec 2025
Closed3 Jan 2026
Awarded—

Bids

1 Bid3 Jan 2026

#	Company	Amount	Status
1	FUTURO INFRA LLP ₹3.7 Craccepted-aoc	₹3.7 Cr	accepted-aoc

Tender Value

₹3.5 Cr

EMD Value

₹5.3 L

Closing Date

3 Jan 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Bhaskar A S

Office Number

Work Description

DIVERSION OF YENNEHOLE LEFT BANK CANAL AT KPTCL 2x500 MVA 400/200 KV SUB STATION AT KADAKOLA IN MYSURU TALUK & DISTRICT

Tender Information

Tender ID

CNNL/2025-26/CN/WORK_INDENT4164

Reference Number

CNNL/2025-26/CN/WORK_INDENT4164

Tender Type

Open

Product Category

Canals including Lining and Structures

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL No 2 VCC Div Mysore

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with valid UDIN along with audited balance sheets to be furnished

RequiredPWD CLASS-II Contractor Registration Certificate as per tender document

Requiredsimilar nature work done certificate issued by Executive engineer should be uploaded in the prescribed formatas per tender document

RequiredGST and Pan card details as per tender docuemnt

RequiredLOC certificate as per tender document

Requiredwork done certificate for minimum quantities as per tender document

RequiredDocuments required key equipments/vehicles

Requiredlist of key minimum technical personal required with qualifiacation certificates

RequiredOther all necessary required documents in prescribed format

RequiredOn hand works and proposed for acceptance work details

Eligibility Criteria

NOT APPLICABLE

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenders from Joint ventures are not acceptable.

The intending bidder should furnish the relevant class certificate of registration issued by State/Central and certificate of enrollment in KPWD.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

If the contractor is not enrolled in KPWD, the successful contractor should enroll in KPWD before concluding agreement.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) and/or as per E-Portal Conditions soon after contract has been issued to bidder.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The tender processing fee will neither be refunded nor will be transferred to other works.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

The successful Tenderer, within 20 days of the receipt of the letter shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, No.2,VCC Division,Mysuru, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, No.2,VCC Division, Mysuru, during office hours on all working days.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4.

Defect liability period depending upon nature / type of work is as under.The defect liability period for this work is 3 years from the date of completion of the entire work.

Employees Provident Fund Registration certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF.

However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any extension of time and additional compensation.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the circular GaBhooI/KaGaGu/DCB/2024-25 Date: 28-1-2025

The GST shall be paid to the tendered amount separately

The Bidder should provide valid present postal address and contact number for Communication. Any details / information can be had from the web site: www.kppp.karnataka.gov.in

Technical Criteria

Past Experience

Executed in any one year the following minimum quantities of work (Cement Concrete - 1330.00cum, Steel- 75.00MT, Earth work/embankment/earthen shoulders-18225.00cum, Metal beam crash barrier-156.0Rmt, WBM/GSB/WMM-460.00cum etc) (80% of peak rate of construction) The criteria above applies to the Individual bidder/Firm/company. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid.

Work Done Certificate

Satisfactorily completed as prime contractor, at least one similar work such as CONSTRUCTION OF CANAL/ALLIED WORKS of value not less than Rs.176.20 Lakhs at 2025-26 price level in the preceding last five years. The criteria above applies to the individual bidder/firm/company. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid

Work Done Certificate

Capabilities of Vendor

List of existing commitments and ongoing works

Others -- existing commitments and ongoing works statement in prescribed format

List of works for which tenders already submitted

Others -- BID SUBMISSION DETAILS

Each tenderer should further demonstrate(i)Availability by owning at least 50% of the required/specified key and critical equipment for this work and(ii)the remaining 50% can be deployed on lease/hire basis for all works provided, the relevant documents commitment agreements etc) for availability for this work are furnished 1)Ajax Concrete Mixer06Nos(Own-3nos,lease/rent-3Nos) 2)Water tanker -04Nos (Own-2nos,lease/rent-2Nos),3)Vibratory Roller/Compactor own/lease/rent-1No).4)Tippers-6nos(Own-3nos,lease/rent-3Nos)5)exacavators-4nos(own-2nos,lease/rent/hire-2nos)

Others -- machinery

List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/firm/company should Employment register and document should be uploaded Civil Engineer-Civil Engineering with Min 5 years experience-1 person, diploma in civil with 5 years experience-2 person

Others -- Employee list qualification certificate

The intending bidder should furnish the relevant class-II certificate of registration issued by state/central

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

The bidder/firm/company should furnish details of liquid assets and or availability of credit facilities of Rs 105.80 Lakhs for the work mentioned above for meeting the required funds in the form of credit lines/line of credit / certificate from scheduled /Nationalized Bank

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under Assessed available tender capacity AxNx1.5 - B where A is Maximum value of civil engineering works executed in any one year during the last five years(updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited, i.e.0.50(6 months)B Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 0.5 year(6 months)Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- existing commitments and ongoing works statement in prescribed format

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e) 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 Achieved in at least two financial years an annual financial turnover (in all classes of civil engineering construction works only) of Rs.704.76 Lakhs.NOTE Turnover certificate duly certified by Chartered accountant along with audited balance sheets with valid UDIN should be uploaded. Financial turnover of previous years will be given a weightage of 10% per year based on the rupee value to bring them to current price value.

Audited CA Certificate of Annual Turnover

Others

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

NOT APPLICABLE

Others -- NIL

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.3 L

Important Dates

Last Activity

3 Jan 2026

Published

26 Dec 2025

Bid Opening

6 Jan 2026

Download Ends

2 Jan 2026

Pre-Bid Meeting

2 Jan 2026

BOQ Preview

•

DIVERSION OF YENNEHOLE LEFT BANK CANAL AT KPTCL 2x500 MVA, 400/200 KV SUB STATION AT KADAKOLA, IN MYSURU TALUK & DISTRICT.

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. with...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) including cost of all machin...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...

•

Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per r...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth o...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...

•

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, wit...

•

Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

DTS INDENT NO 4164.doc

Tender Document • 2.12 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

FUTURO INFRA LLP

₹3.7 Craccepted-aoc