General

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.55) OD 250mm dia HDPE Pipe

Manufacture, supply and delivery of H.D.P.E (PE-100 Grade) Fittings conforming to IS 4984-1995 including transportation to any where in A.P Excluding Taxes.

OD 250mm dia MS Flanges

OD 250mm dia Pipe Ends Long Neck (Collars)

OD 110mm dia MS Flanges

OD 180x200mm dia Reducers

OD 250mm dia HDPE TEE

End Caps (Dummies)

Supply, laying and jointing of C.I.D Joints complete with rubber rings including filling with water, including cost of jointing Material etc., complete.

Class 15 110 mm dia

Class 15 250 mm dia

Class 15 250 mm dia

Class 15 200 mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 250mm Dia DI Double Flanged Sluice Valve PN-1.60

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete. (1/2 " to 1 ")

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm / 6 mm thick).

Cutting open B.T. road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker - 1 Cum.Cutting open C.C Road surface (S.No.25(b), P.8, PH Items)

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Laying and jointing of H.D.P.E Pipes by butt fusion welding as per IS:7634–part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure - 1 Rmt (Public Health Items, P.5)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 100mm Dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 150mm Dia

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.56) 110mm Dia

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.56) 160mm Dia

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.56) 200mm Dia

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 M30 (Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork, spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including curing of concrete slabs for 28- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. ( APSS No.126)

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Centering Charges for VCC vertical walls of plane surface including all type of labour charges (Open drains) for 600 mm and above.

VRCC M-20 Design mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shutteing for culvert slabs

Provision for Seignorage charges

Provision towards Considaration amount @100% unseignorage for (as perG.O Ms no .37 Dt 15.03 2024of industries and commerce (M.lll) Department

Provision towards DMF @ 30% unseignorage for (as perG.O Ms no .37 Dt 15.03 2024of industries and commerce (M.lll) Department

Provision towards Merit @2% unseignorage for (as perG.O Ms no .37 Dt 15.03 2024of industries and commerce (M.lll) Department .

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item