REPAIR MAINT OF ELECTRICAL AND WATER SUPPLY INSTALLATIONS, OTHER MISCELLANEOUS ITEMS AT MIL STN BARABANKI IN AREA OF AGE EM UNDER GE (EAST) LUCKNOW

Amount

M&L for repairs to LT out door feeder panels of various sizes installed in the station by welding front openable door and replacing hinges & locking arrangements and applying one coat of synthetic enamel paint on entire inner and outer surfaces including preparation of surfaces, complete all as specified and directed.

M&L for repair and servicing of AMF panel board including fault finding and replacement of defective parts such as voltmeter,Ammeter, frequency meter, relays with wiring, complete all as specified and directed. Note: Fixture/spares Shall be paid and measured seperately under repective items as suuply only.

M&L for repair and servicing of Automatic power factor controller panel (TAS Powertek Pvt Ltd) board including fault finding and replacement of defective parts such as voltmeter, Ammeter, frequency meter, relays, start/stop push buttons MCB with wiring, complete all as specified and directed. Note: Fixture/spares Shall be paid and measured seperately under repective items as suuply only.

Supply only Ammeter 0-200 Amps, Square flush digital type as per sample complete all as specified and directed.

Supply only Ammeter 0-200 Amps, Square flush Analouge type as per sample complete all as specified and directed.

Supply only Voltmeter 0-500 Volts, Square flush digital type as per sample complete all as specified and directed.

Supply only Voltmeter 0-500 Volts, Square flush Analouge type as per sample complete all as specified and directed.

Supply only Frequency meter 0-50 Hz Square flush, digital type as per sample complete all as specified and directed.

Supply only KWH meter, 3 Phase, 4 wire, 415 Volts, Accuracy class-I as per sample complete all as specified and directed.

Supply only KWH meter, Single Phase, Electronic energy meter of rating 5-30 Amp, class-1.0, 240V, 50 Hz, counter type display with Transparent Hinge Type Box as per sample complete all as specified and directed.

Supply only MNX power contactor 415 Volt, 50 Hz, AC of capacity 110 Amps as per sample complete all as specified and directed.

Supply only SMPS battery charger kit mounting in AMF panel as per sample complete all as specified and directed.

Supply only automatic generator start/stop relay as per sample complete all as specified and directed.

Supply only HRC Fuse unit HN size 00,100 amp 100 KA 415 Volt 7.5 W as per IS-13703( Part-II) .

Supply only MCB DP 20 Amp 10 KA C-20 complete all as specified and directed.

Supply only MCB DP 25 Amp 10 KA C-20 complete all as specified and directed.

Supply only MCB DP 40 Amp 10 KA C curve complete all as specified and directed.

Supply only MCB TPN 63 Amp 10 KA 415 V 50 Hz C curveall complete all as specified and directed.

Supply only MCCB TP 100 Amp 35 KA 415 V, 50 Hz complete all as specified and directed.

Supply only MCCB 125 Amp 3 pole 36 KA, 415 V complete all as specified and directed.

Supply only MCCB TP 160 Amp 36 KA 415 V, 50 Hz complete all as specified and directed.

Supply only MCCB 250 Amp 3 pole 36 KA 415 V complete all as specified and directed.

Supply only Start-stop push button suitable for automatic power factor controller, GREEN and RED Coloured complete all as specified and directed.

Supply only Neon LED indicator lamp prewired as per sample complete all as specified and directed.

Supply only OFF LOAD CHANGE OVER SWITCH 200 Amp, 4 Pole complete all as specified and directed.

Supply & laying XLPE insulated, armoured, heavy duty, underground electric cable with aluminium conductor, 1100 volts grade, cross section area 6 Sqmm, 2 core, complete all as specified and directed. (Note :- Excavation & Earth work shall be measured and paid separately under the respective items.)

All as per description of serial item No. 27 above but cross section area 10 Sqmm, 2 core.

All as per description of serial item No. 27 above but cross section area 16 Sqmm, 2 core.

All as per description of serial item No. 27 above but cross section area 25 Sqmm, 2 core.

All as per description of serial item No. 27 above but cross section area 25 Sqmm, 4 core.

All as per description of serial item No. 27 above but cross section area 35 Sqmm, 4 core.

All as per description of serial item No. 27 above but cross section area 50 Sqmm, 3.5 core.

All as per description of serial item No. 27 above but cross section area 70 Sqmm, 3.5 core.

All as per description of serial item No. 27 above but cross section area 150 Sqmm, 3.5 core.

All as per description of serial item No. 27 above but cross section area 240 Sqmm, 3.5 core.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point, complete all as specified and directed.

M&L for sand cushioning for protection of cables, complete all as specified and directed.

Supplying & laying fly ash bricks, Non Modular, sub-class B designation 7.5, over LT/HT cable laid flat for protection of cable complete all as specified and directed.

S& F for erecting 9.0 Mtr steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws Note: (i) Excavation ,earth work and PCC shall be measured and paid separately. (ii) Painting will be measured and paid seperatelyunder relevent item.

Material & Labour for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in base foundation of pole concrete including providing necessary form work complete all as specified and directed.

Material & Labour for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foundation of pole/stay and filling of mass concrete including providing necessary form work complete all as specified and directed.

Material & Labour for PCC (1:2:4) type B-1 using 20 mm graded aggregate as in coping of pole including providing necessary form work complete all as specified and directed.

S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable XLPE, armoured, Aluminium conductor cable of size 6 to 16 sqmm complete all as specified and directed.

All as per description of serial item No. 46 above3 but for 3 ½ / 4 core XLPE, armoured cable of size 25 to 50 sqmm.

All as per description of serial item No. 46 above3 but for 3 ½ / 4 core XLPE, armoured cable of size 70 to 120 sqmm.

Labour only for 'B' check maintenance/servicing of DG set including replacing of defective wornout parts by new spares such as filters, V belt, engine oil, rubber hoses etc for 62.5 KVA DG set complete all as specified and directed. Note: Fixture/spares Shall be measured & paid seperately under repective items as suuply only.

Supply only diesel filter element with 'O' ring as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only oil filter element with 'O' ring as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only air filter element with 'O' ring as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only fan belt as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only alternator belt as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only rubber hose pipe set complete with clamps as per sample suitable for 62.5 KVA DG set complete all as specified and directed.

Supply only engine oil multigrade 20 W 40 complete all as specified and directed.

Supply only inhibitor corrosion (coolant for radiator) complete all as specified and directed.

S&F in replacement battery lead set PVC insulated multistranded copper conductor 50 Sqmm, 1.25 m long each fixed with brass cladded copper clamps suitable for DG set 62.5 KVA, complete all as specified and directed.

Cleaning of fuel tank both internally and externally by removing all the dust/sediments etc, complete all as specified and directed.

Taking down and cleaning the radiator both internally and externally by removing all the dust/sediments and cleaning of capillary tube by pressure and refixing complete all as specified and directed.

Supply and fixing in repairs rigid Non-metallic PVC conduits of external width not less than 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing with street light pole using suitable fixing accessories complete all as specified and directed.

S&F copper wire three core multistrand FRLS 1.5 sqmm complete all as specified and directed.

S&F MCB, SP 5 to 30 Amps, 240 volts bracking capacity 10 KA, ISI marked complete all as specified and directed.

Material and labour for Cleaning and preparation of old painted surface of street light steel tubular pole 9mtr long and painting with two coat of aluminum paint including brackets including applying two coats of cement base paint to coping, rewriting Pole No complete all as specified and directed.

Supply and fix time switch suitable for daily and weekly time programming with IP 20 protection, AC, 230 volts, one channel, two module and making connections by using suitable copper lugs complete all as specified & directed. Make: Legrand, Cat No : 4126 31/HAGER/SCHNIDER

Material and labour required for locating fault in U/G LT cable by using fault detector machine including transportation and by carring out high pressure test complete all as specified and directed.

S&F of street light fitting Pressure die cast aluminium housing (LM6 Alloy), Minium 9000-10000 Lumens with maximum system voltage 90 W-100 W, with PMMA lenses,External built proper heat shinks and toughtened glass/PC ensuring IP66 & IK>05 protection, LED used shall be SMD type and fixture should have minium efficiency at system level (Not chip level) 100 Lumens/Watt, Life of system should 50000 Hrs all including necessary wire for fitting light to pole complete all as specified and directed.Make: Philips Cat Part No BRP410 LED 094 CW HE MR FG S2 PSU GR, CG Cat Part No LSTP-100-CDL-A or Havells Cat Part No Endura Pearl Magnum SL90WLED757PASYTOTG.

S&F bracket for street light fitting made out of 40 mm dia light grade GI tubing bent to required shape 1.5 m long including necessary GI clamps, nuts bolts and washers and connecting with thee core flexible wire of 1.5 sq mm copper conductor to the pole junction box complete all as specified and directed.

Supply and fix in replacement of LED security light fitting 40 watt, 3500 lumen, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fix in repairs danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with screws, nut bolts with adequate size clamps on HT/LT pole of 25x20 cm size

Supply and fixing contactor 32 Amp Capacity, 3 Pole having coil voltage 220 V, 50 Hz for time switch complete all as specified and directed.

Cleaning/clearing of vegitation around the installations and disposing off complete all as specified and directed.

M & L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

All as Item No 73 above but using galvanised earth lead wire 4.0mm dia.

Supply only 10 SQMM 2 Core Aluminium unarmoured, flame resistant PVC flat cable, ISI marked complete all as specified and directed.

Taking down written shut down from concerned JE/AGE (E/M) for trimming of tree branches touching to the HT/LT over head line or near to the HT/LT over head line as per the direction of AGE E/M/ JE incharge complete including removing the tree branches. Note :(i) Span from one pole to next pole (30 to 50 RM) will be considered as a one Job (ii) Any damage cause due to contractormen will be rectified without any extra payment (iii) T & P such as ladder, rope, cutter, Axes and other related material will be provided by the contractor.

Supply and fix in replacement of integrated LED bulk head fitting 12 Watt LED lamp, 60 lumen, 6500K with IP 66 and IK 09 impact resistance protection comprises of high pressure die cast aluminium housing, polycarbonate cover etc complete all as specified and directed.

Supply, install, testing and commissioning in renewal of indoor type cubical LT panel board suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof comprising of the following :-(Details are given in Annexure-A on page No-15 of tender document )

Supply, install, testing and commissioning in renewal of outdoor type cubical LT panel board suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof comprising of the following :-(Details are given in Annexure-A on page No-15 of tender document )

Supply and fix LED post top lantern fitting for 360 degree indirect light 40W IP 65 protection complete all as specified and directed.

Supply and fixing LED Flood Light 100W equiped with IP 66 protection or above complete all as specified and directed.

Material and Labour in replacement of test point terminal block made out of gun metal of phospharus bronze fixed in 75 x 75 x 25 mm MS/polycarbonate enclouser drilled and screwed including 3 Nos of 8 mm dia 25 mm long screw complete all as specified and directed.

Supply and fixing in replacement of Earth continuity conductor with adequate size saddles fixed to wall on batten or recess or any other indicated situation for loop earthing etc. as required 32mm x 6mm GI strip complete all as specified and directed.

M&L Stay assembly comprising of 20 mm dia stay rod 2150 mm long, loop type insulator of size 90 mm x 140 mm, galvanised stay plate 6mm thick of size 300 mm x 300 mm, stay bow, stay clamps etc. complete all as specified and directed & shown in EP No. 1 of SSR Pt I. Note : Excavation, earth work and PCC shall be measured and paid seperately.

M&L for Galvanised stay strand 7/4 mm complete all as specified and directed.

S & F PVC weather proof, hinged door, junction box with 30A Aluminium bus bar, 240V, Neutral link and 1No MCB SP of 10 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc all as specified and directed.

S & F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed.

S & F FRP smart meter box for single phase electric meters all as specified and directed.

S & F polycarbonate tampered proof electric meter seal all as specified and directed.

Boring of road for laying of pipe not exceeding 90 cm below groundlevel all complete as specified and as directed.

M & L for cement concrete type C2 1:3:6 (40 mm graded aggregate) for making good to disturbed surface of road etc. all as specified and as directed.

M&L for taking out of submersible pumpset capacity 25 HP from bore well/shallow well for repair and replacement of unserviceable pipes, parts, overhauling,rewindning and re-installation / lowering in the same position along with all accessories, jointing of delivery pipes,cable after repairs by using tools and tackles as required at site,complete all as specified & directed.

M&L for repair and overhauling of submersible pumpset of capacity 25 HP by replacement of bearings,stainer,applying quick drying warnish to starter winding,cleaning of mineral deposition and refixing Part by part by using tools and tackles and necessary GI specials,bolts nuts,as required at site,complete all as specified & directed.

M&L for rewinding of 25 HP submersible pump set motor coil with super enameled quality copper winding wire as per existing sample after cutting, removing burnt out / leakage damaged coils & reassembling the motor complete as reqd complete all as specified & directed.

M&L for Transportation of submerssible pump set 25 HP from Pump House to workshop and back to Pump House after repair complete all as specified & directed.

M&L for repair & servicing of sluice valve of size 100 mm bore by replacement of stainless steel spindle , gun metal checknut , Gland rope, side nobe lock nuts, and refixing in the position complete all as specified and directed.

M&L for Flange joints with 150/100 mm dia flange joints by digging out up to depth of existing pipe line and complete the joint by using including necessary flange of 20 mm thick, 6 mm thick rubber insertion, nuts, bolts, Washers including bailing out the accumulated water in the trenches, complete all as specified and directed.

M&L for lead joint of size 100/150/80 mm bore pipe by digging out up to depth of existing pipe line and bailing out accumulated water and complete the joint by using Lead, spunyan CI specials what ever required at site and making good disturbed area, complete all as specified and directed.

Supply & fixing sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 100mm bore complete all as specified and directed. Make : Kirloskar/L&T/BIR.

Supply & fixing sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 150 mm bore complete all as specified and directed. Make : Kirloskar/L&T/BIR

Supply & fixing sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 80 mm bore complete all as specified and directed. Make : Kirloskar/L&T/BIR

S&F in repair Non return valve of CI flanged end, class-I, ISI marked with rubber packing, nuts & bolts etc complete of 100 mm bore complete all as specified and directed.Make: Kirloskar/L&T/BIR.

M& L for taking up existing cast iron pipes with flanged ends, centrifugally cast, class 'B' in any length, laid in trenches of size 100mm bore, complete, all as specified and directed. Make: Electro steel/Jindal/Kesoram Ind/Tata/Jaiswal Neco/Bengal iron Corporation (Note :- Excavation & Earth work shall be measured and paid separately under the respective items.)

M&L for taking up existing CI/GI 80 mm Pipe line with spigot and socket end from trenches and laying for GI pipe medium grade, with all fittings, laid in trenches or on walls of size 80 mm bore, complete, all as specified and directed . Make: Jindal/Tata/Prakash /Surya (Note :- Excavation & Earth work shall be measured and paid separately under the respective items.)

All as per description of serial item No. 104 above but 100mm bore pipe.

All as per description of serial item No. 104 above but 50mm bore pipe.

All as per description of serial item No. 104 above but 40 mm bore pipe.

All as per description of serial item No. 104 above but 25 mm bore pipe.

All as per description of serial item No. 104 above but 20 mm bore pipe.

S & F 50 mm bore Gun metal gate valve in repair with iron wheel head, screwed both ends for iron / PPR pipe complete all as specified and directed.

All as per description of serial item No. 110 above but 40 mm dia

All as per description of serial item No. 110 above but 25 mm dia

All as per description of serial item No. 110 above but 20 mm dia

Repairs & cleaning of valve chamber of size 500X500X500 mm by descaling accumulated water and removing all sludge, vegetables and carry out all masonry work like plastering, PCC flooring and applying two coat of white wash on inner and outer surfaces and applying two coats of synthetic enamel paint over a coat of metal primer on metallic opening door, sluice valve and pipeline including necessary welding work to repair door, hinges,complete all as specified & directed.

All as per description of serial item No. 114 above but valve chamber of size 750x750x750mm.

S& F in repair automatic star delta starter conforming to IS 19947-4 suitable for submersible pump set 25 HP complete testing and commissioning complete all as specified and directed.Make : Siemens/L&T/ABB

M&L for Service and repair of Chlorine Dosing Pump alongwith connected items complete all as specified and directed. (Note: All itmes required for Service will be measure and paid separately)

S&F in repair solid PVC NRV of 1/2" Bore connection for outlet of Chlorine Dosing Pump complete all as specified and directed.

S&F in repair PVC adaptor of 1/2" Bore for connecting outlet/inlet of Chlorine Dosing Pump complete all as specified and directed.

Taking out the unserviceable compressor (Sealed unit) from water cooler 150 liters capacity of any make and type and repalacement of new compressor obtained from the factory out let make Kirloskar/Tecumseh/Whirlpool, model ACJ 513, AW 1000, including suitable relay, over load and starting/running capacitor flushing out the old burnt condensafe from the gas system by vacuumisation, cleaning the system by CTC solution , pressure testing of the system, gas charging with R-134a/22 gas upto the desired pressure, testing & commissioning the water cooler complete all as specified and directed.

Material and labour for flushing out the condensate from the gas system of water cooler of capacity 40/80, 60/120,150/150 litres, injecting CTC for demoisturing the system , pressure testing and gas charging with R-134a gas upto the desired pressure complete all as specified and directed.

Supply and fixing in replacement chromium plated brass taps push button type, 15mm dia for water cooler of any capacity suitable for Usha/Blue Star water coolers complete all as specified and directed.

Supply and fixing in replacement of blower fan motor 1/10 HP suitable for water cooler, single phase 230 Volts including mounting ring/washer complete all as specified and directed.

Supply and fixing Running capacitor of 15 mfd complete all as specified and directed.

Draining out water from over head reservoir of 50000 Gln capacity , removing sludge deposited, scales and other impurities from inside the tank thoroughly by scrapping with wire brushes, broom stick to make the surfaces free from sludge deposit and impurities, cleaning & washing the surfaces with bleaching powder solution including rewashing with fresh water and writing letters /figures like “Tank cleaned on____________(date) and Due date_____ boldly & prominently with thick synthetic enamel with height & width of letters/figures 15cm & 10cm respectively in prominent places of tank all complete all as specified and as directed.

Supply and fixing replacement drain hose pipe not less than 1.5 metre length and 30/40mm dia complete with clamping arrangment complete all as specified and directed.

Supply only Calcium Hypochlorite Hydrated (Sodium Process) bleaching powder granules for treatment of water complete all as specified and directed. Make: Aquafit or equivalent.

S&F cast iron fittings for spigot socketed pipes upto 150 mm bores like Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

S&F cast iron fittings for flanged pipes upto 150 mm bores like Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged complete all as specified and directed.

Unnati Engineers