PALAKKAD DISTRICT PANCHAYATH- INFRASTRUCTURAL DEVELOPMENT WORKS AT STATE SEED FARM, KUNNANUR

Amount

Part I

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

15.39.3 : Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 25 mm upto 40 mm

15.41 : Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

od2739/2019_2020 : Dismantling damaged UV sheet , shade net and insect proof net and disposal of unserviceable materials within 50 metres lead as per direction of Engineer in charge

14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

od2272/2019_2020 : 25 mm wooden planking, tongued and grooved in side panelling, including fixing with iron screws complete with: Deparment supplied wood(MODIFIED DSR 11.33.1)

9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane

50.9.5.3 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Vengai wood 35 mm thick shutters

50.9.13.3 : Supplying and fixing Vengai wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

50.9.14.3 : Supplying and fixing Vengai wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

od2307/2019_2020 : Laying on roof departmental pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on wooden frame work complete. Modified DSoR 12.49

od2308/2019_2020 : fixing on roof departmental pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on wooden frame work complete modified DSoR 12.48

12.5.1 : Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2

14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

od2728/2019_2020 : Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of epoxy paint over two coats of approved steel primer etc. complete, all as per direction of Officer-in- charge. (MODIFIED DSR 13.52.1)

od2768/2019_2020 : Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :18 mm thick Cement bonded wood particle board as per IS:14276 (Modified DSR 10.26.2)

od2313/2019_2020 : Providing and fixing crates with Pincoda wood with frame size of 70 X 50 mm

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.51.2 : Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats

13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work

od2745/2019_2020 : Supplying and laying UV stabilized polythene film 5 layer, 200 micron thick of reputed makelike Ginegar,Tuflex, Garwara etc.having IR blocking, Antidrip/ fog, diffused film on the GI truss work with aluminiumlocking profile with zigzag springs galvanised, with hexwasher including all cost of materials and labour charges etc.complete with fitting and locking arrangements.

od2748/2019_2020 : Supplying and laying weed control woven net over the floor of the yard, GSM of the net as per<br>the directions of officer in charge

od2749/2019_2020 : Supplying fixing and laying 50% UV stabilized shade net on the movable screening without<br>damaging shade net with manual rolling systems including all frame works and necessary fittings at user comfortable<br>height<br>

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

od2761/2019_2020 : Supplying clog resistant, durable and self flushing Min i sprinklers, 30 LPH and minimum 6m<br>wetting diameter to be installed in a spacing of 3x3m and to be fixed on 16mm LLDPE pipe at operating pressure<br>less than 4.5 bar with distribution uniformity highest

od2762/2019_2020 : Supplying riser for micro sprinkler made of high density plastic 1.0m long

od2763/2019_2020 : supplying and fixing micro sprinklers of reputed make

od2767/2019_2020 : Supplying and fixing 16mm LLDP pipe for fogger line

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

od2783/2019_2020 : Supplying and fixing 40 mm PVC Ball Valve

SHANUS LAL M

P Yousuf

KERALA AGRO INDUSTRIES CORPORATION LTD,AMBALAPPUZHA

Bidder Name

P Yousuf

VT UMMER

KERALA AGRO INDUSTRIES CORPORATION LTD,AMBALAPPUZHA

SHANUS LAL M