construction of Sub divisional Laboratry at Baroh

Amount

Brick work using common burnt clay building bricks in super structure above plinth level upto Door level in C.M 1:6 (1cement: 6sand) complete in all respect as per the direction and entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x 5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:- Beams, cantilever, girders and lintels sides and sofits of beams haunchings catilivers girders bressumers and lintels not excessing 1 meter in depth sesmic bend plinth level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and laying cement concrete work 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- Beams, cantilever, girders and lintels sides and sofits of beams haunchings catilivers girders bressumers and lintels not excessing 1 meter in depth sesmic bend plinth level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and laying granite stone in flooring 20 mm (average) thickness base of cement mortor 1:3 (1 cement :3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and laying Mild steel /Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level (tor steel) complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

20mm cement plaster in single coat on rough side of brick/ concrete /stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts.

Pointing on brick work with cement mortor 1:4 (1 cement : 4 sand) (Flush Pointing). complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Distempering (Two coats) with oil bound washable distemper for approved brand & manufacture and of required shade on un-decorated wall surfaces to give an even shade over & i/c a priming coat with distemper primer of approved brand & manufacture after thoroughly brushing the surface free from mortor dropping & other foreign matter & also i/c preparing the surface even & sand papered smooth priming coat with distemper primer complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge with in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose prepared materials complete in all respect within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing Precast terrazzo tiles 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 20 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing with white tiles complete in all respect within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge.

Providing and fixing anodised aluminium work Jindal / Hindalco for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screwsl complete in all respect as per the direction and the entire satisfaction of Engineer-In-Charge within all leads and lifts. (125 X 44 mm)

Providing and fixing for Shutters of doors windows and including providing and fixing hings/pivolts and making provisions for fixing of fitting where-ever required including the cost of PVC/neoprene gaskets are required (fittingh and glazing/panelling shall be paid for seperately) complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (44 X 44 mm)

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge designation 85-G with wire of dia 0.56mm for doors, windows and clearstorey windows including bright finished / black enamelled iron hings with necessary screws complete in all respect as per the direction and to the entire Satification of Engineer-in-Charge with in all leads and lifts.

Providing and fixing of glazing with glass panes with putty and nails including removal of broken glass panes 4mm thick (weight not less than 13.75 kg/ sqm.) complete in all respect as per the direction and to the entire Satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and fixing of 25mm thick water proof commercial board in shelves box for cup board with butt joints & fixing with nails & screws etc. complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (Laminated Board)

Providing Steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing and fixing 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm over all with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and Fixing of partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) cement bonded partical board 8 mm thick complete in all respect with in all leads and lifts.

Providing and fixing of Hydraulic Door Closer complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and fixing of aluminium sliding door bolts anodized transparent or dyed to required colour and shade with bolts and nuts screws etc complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. (300X16mm)

Providing and Fixing of aluminium Tower bolts (barrel type) anodised transparent with necessary screws etc. complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Fixing of anodized MS handles anodized transparent or dyed to required colour or shade with necessary screw etc. complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. (125 mm)

Providing and Fixing of LED light 20 watt including all accessories complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. .

Providing and Fixing of Sink / wash basin with padestal for required size complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and Fixing 10.00/12.50/15.00 Ltrs. Capacity viterous Chiana low level flushing cistern with a pair of CI or mild complete with fitting such as valve less syphon 15 mm nominal size brass ball with polythene float, CP brass handle, Uninon and coupling for connection with inlet, outlet an over flow pipe 40 mm dia CP flush bend including cutting hole in wall and making good the same and connecting the flush bend with cistem and closet (over flow) pipe to be measured for separately complete as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and Fixing Vitreous china wash down water closet (European type W.C.Pan) with (Hindostan/ Johnson make) superior quality)"P" or "S" traps i/c jointing the trap with soil pipe in cement mortor 1:1 (1 Cement : 1 Sand) (seat and cover to be measured and paid separately)as per the direction of Engineer-in-Charge with in all leads and lifts. Anglo indian (Universal closet)

Providing and fixing of Angle Cock complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and Fixing CP brass bib tap with capastan head of 15mm dia as per the direction of Engineer-in-Charge with in all leads and lifts. (Long Body).

Providing and fixing of pillar Cock complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and fixing of PVC Connection Pipe complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and fixing of Towel Rail complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and fixing of Shop Dish complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and fixing of looking Merior complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (Exhaust Fan, Heavy duty, 300 mm sweep)

Providing and fixing of Aluminium Grills of required pattern in aluminium frame of Window etc. which plain grill complete in all respect as per the direction and to the entire Satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and fixing CFL type 27 watt light with angle holder as required size complete in all respect complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. RFRLS/PVC insulated single core copper conductor cable as requiredcomplete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (Group B)

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Wiring for circuit/sub-main with 4X2.5 sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 2.5 sq mm (4X2.50+2X2.5) HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

S.P. 5/ 6 Amps one way switch, piano type.

5 Pin 5/ 6 Amps. one way switch, porcelain base/piano type.

6 Pin 15/16 Amps. socket outlet, porcelain base/piano type.

Supplying & fixing metal box of 180mm.x100mm.x60mm. Deep (nominal size) on surface or in recessed with suitable for fixing phenolic laminated sheet cover in front including painting etc. as required (180mmx 100mmx 60mm. Deep) and providing and fixing 3 pin 15/16 AMP socket out let and 5/6 Amp Tumbler/Paino type switch connections etc. as required (SR) complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying & fixing metal box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (200mm.x250mm.x100mm. deep).

Supplying and fixing brass bracket lamp holder including connections etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Single pole. Cat-B.

Double pole. Cat-B.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. complete in all respect as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (Ceiling Fan 1200 mm sweep, Category-A)

Providing and fixing Street Light including all acessories as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

deep kumar