Spl Repair/ Renovation of Plastering, Flooring, Tiling of Bathroom, Toilets, Roof Treatment of OR Md Accn Bldg No P-47 (06) at FAFA Line and provn of car parking near JCOs Md Accn Bldg No P-198, P-197 and P-174 of 253 Med Regt at Anarwala under GE De

Amount

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

All as per item No 02 here-in-before but except bricks complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including all quoins, arches, pillars etc. complete all as specified and directed.

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc.complete all as specified and directed.

Material and labour for 10 mm thick plastering on ceiling surfaces in CM (1:4) even and smooth without using extra cement complete all as specified & directed.

Material and labour rendering 15 mm thick on cement mortar 1:6 over fair/ unfair faces of brick work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately under respective item of this schedule.

Supply only liquid water proofing compound (Dr Fixit or equivalent) @ 0.20 ml per bags of cement complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and finally rubbed and smooth with sand paper complete all as per SSR part-I and as directed by Engr-in-charge.

Material and labour for applying interior grade wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour for applying exterior grade wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered or unplastered wall or putty surface including preparation complete all as specified.

Material and labour for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

Material and labour for preparing plastered or unplastered new surface of walls and applying three coats of white wash on wall Surface complete all as specified and directed.

Material and labour for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash on wall surface complete all as specified and directed.

Material and labour for preparing plastered or unplastered new surfaces of ceiling and applying three coats of white wash on wall Surface complete all as specified and directed.

Material and labour for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Demolition of PCC/terrazo floor in ground floor and paving n.exc 15 cm below or above ground level including tiles stone flooring etc complete all as specified and directed.

Material and labour 25 mm th PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

Roughening surfaces of old concrete floor by picking with chisel, sweeping clean and washing down with water to remove dust, etc.omplete all as specified and as directed by Engr-in-Charge.

Material and labour PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping,benching,anchorage blocks, lintels upto 1.5m clear span,cills, steps, sesmic & other similar bands, plinth course, lacing course, parapets & ralling upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for water trought & the like including weathering, slightly rounded or chemfered angels & throating complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

Supply and fix non-skid ceramic tiles 8 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Square metre but not exceeding 0.36 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 24 here-in-before but as in skirting complete all as specified and directed.

Supply and fix non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour Rendering 10 mm thick in cm 1:4 for dado & skirting on brick/concrete wall surface finished fair and even for receiving tiles in vertical surfaces complete all as specified and directed.

Material and labour Glazed Ceramic tiles coloured, of size 300 mm x 450 mm x 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 18-20 mm thick laid over cement screed base 15 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and as directed. Note: Size of Kota stone shall not be less than 550 mm x 550 mm.

Material and labour for machine cut Kota stone slab 16-18 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in CM 1:4 and jointed with neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of stone slab and tiles and laid bedded in any mortar of any description in floors, apron, etc. complete all as specified and directed.

Material and labour for 16-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 15 mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement in ground floor and paving below or above ground level complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Material and labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

Supply and fix PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

Supply and fix CP bib tap short body fancy type cast copper alloy 15 mm bore screwed down with crutch or butterfly handle for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix fancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15 mm dia iron pipe complete all as specified and directed.

Supply and fix in repairs CP brass fancy type Angle cock 15 mm dia ISI mark complete all as specified and directed.

Supply and fix CP brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 600 mm PVC 'P' trap.

Demolition of reinforced cement concrete, of any description complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams, base for column, etc under piles and mass concrete complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in columns, pillars, peirs, posts and struts complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof beam, floor beam, etc and the like, complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete etc. Complete all as specified and directed.

Use and waste of form work for side and soffits of floor beam, roof beam and the like complete all as specified and directed.RCC Slab such as roof slab, chajja, floor slab etc. for fair finished surfaces complete all as specified and directed.

Use and waste of for form work for RCC Slab such as roof slab, chajja, floor slab etc. for fair finished surfaces complete all as specified and directed.

Use & waste of formwork to sides of pillers, posts, struts, piers, columns and stanchions etc for fair finished surfaces of concrete complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, break in floor & roofs n.exec 20 cm wide horizontal or sloping and smilar works complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including form, moulds, mitred,stopped ends etc complete all as specified and directed.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT) complete all as specified and directed.

Material and labour for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Taking down chowkat with shutter area exc 1.5 sq.mt but n.exc 4 Sq.mt each complete all as specified and directed.

Taking down chowkat with shutter area n.exc 1.5 Sq. mt each complete all as specified and directed.

Taking down shutter only area exc 1.0 sq.mt but n.exc 2.00 Sq. mt complete all as specified and directed.

Taking down shutter only area exc 1.0 sq.mt but n.exc 2.00 Sq mt and refixing in the same opening after necessary easing and repair complete all as specified and directed.

Material and labour cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. (Note: frame filled in cement concrete1:2:4 type B-0 ( using12.5 mm stone aggregate)

Material and labour 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fix 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood (Shisham) complete all as specified and directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cubic metre from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

Supply and fix of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate including taking down old complete all as specified and directed.

Dismantling of block board as in kitchen cabinets and making good disturbed surfaces to match with the existing complete all as specified and directed.

Supply and fix 18 mm thick PVC sheet of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer - in -charge.

Supply and fix 18 mm thick PVC sheet of one side plain and one side prelaminated colour to make kitchen cabinet Partition Shutter/ drawer Front, cup board shutters complete as per specifications and as directed by the engineer - in - charge.

Supply and fix continous piono hinges 30 mm width of flap of stainless steel complete all as specified and directed.

Supply and fix 150 mm MS powder coated Hasp and staples safety type, stove annnealed black including bolt to hings plate and fixed with screwed complete all as specified and directed.

Supply and fix 200mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed complete all as specified and directed.

Supply and fix 125mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 150mm mild steel powder coated handles cast type anodised complete all as specified and directed.

Supply and fix 125mm mild steel powder coated handles cast type anodised complete all as specified and directed.

Supply and fix 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed complete all as specified and directed.

Supply and fix 300 mm, mild steel powder coated ordinary rat rail rod pattern door springs including roller plate complete all as specified and directed.

Supply and fix MS flat iron 25x3mm thick for hold fast including all necessary drilling, bolting or riveting, notching, chamfering, etc omplete all as specified and directed.

Supply and fix 250 mm long mild steel powder coated sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

Supply and fix in galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average aperature 1.18 mm complete all as specified and directed.

Material and labour applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces including preparation, exc 10 cm width or girth, complete all as specified and directed.

Material and labour applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Material and labour for preparation of already primed new steel or iron surfaces and applying two coats of synthetic enamel paint exc 10 cm width or girth, complete all as specified and directed. (Note: For steel windows only)

Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and directed.

Material and labour in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling Mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix mild steel work as in main and cross beam, truss, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for surface preparation and treating of joints, filling of honey combs with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) with WPC over roof surface complete all as specified and directed.

Material and labour for rendering 10 mm thick plastering in cement mortar 1:4 with WPC (If ordered by Engineer-in-Charge) in roof surfaces surface finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/Square metre and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Square metre ) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Square metre over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed. Note: The work of water proofing treatment shall be got executed through original manufacturer or authorised applicator only.

Supply and fix mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete as specified and directed

Material and labour sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 Square metre each pane complete all as specified

Supply and fix in repairs 25mm dia stainless steel drapery rods with both side fixing bracket and fancy piece both side of rod, complete all as specified and as directed.

Material and labour for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Square metre . (d) Supply and providing APP based polymeric water proofing members 3 mm thick of weight not less than 3.00 Kg/ Square metre . (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Square metre . (f) Material and labour for PCC 1:5:10 complete mixed with brick bats 40 mm size. (g) Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth as specified.

Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sunken filling sub base or leveling course of floor etc complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed in walls complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

Supply and fix in reapir PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as required and as directed.

Supply and fix PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as required and as directed.

Supply and fix PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix glass shelf assembly of 5.50mm thick glass , 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws etc, complete all as specified and directed.

Supply and fix PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply and fix waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified and directed.

Supply and fix in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fixed pillar taps, swan neck type, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed complete all as specified and directed.

Supply and fix in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

Supply and fix in repair 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

Supply and fix 20 mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm complete all as specified and directed.

Supply and fix 15mm dia brass chromium plated Kitchen sink mixer with accessories for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Material and labour for wire netting size of mesh 12 mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and directed.

Supply and fix in repairs plate rack for 200mm dia plates and size 60 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

Material and labour for 25 mm thick sand filling under floors or in foundations including spreading & levelling complete all as specified directed.

Material and labour for pre-painted coloured (red/ yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Anti termite treatment providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall where along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing walls/ floors complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for foundation in soft /loose soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Material and labour salt glazed stone ware (SGSW) drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

Material and labour cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

Material and labour for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) smooth finished and reforming benching as required complete (internal dia of pipe 150mm).

Material and labour 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).

Material and labour 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and as directed.

Material and labour PCC 1:3:6 Type C1 (using 40mm graded stone aggregate) as in surface channel drain, etc complete all as specified and directed.

Excavation in soft/loose soil as in post holes each not exc 0.5 Cubic metre & getting out, returning filling in and ramming earth in layers not exc 25cm thick, watering making good surfaces and removal of surplus soil to a distance not exc 50 mtr complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Supply and fix steel work in tubular trusses, poles including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 quality-A complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long (05 to 10 mm dia of neck) complete all as specified and directed

Material and labour for Hardcore of broken stones or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified and directed.

Material and labour applying two coats of cement base paint over a coat of suitable primer on newly/old plastered surfaces of wall complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as specified and directed.

Material and labour for Point wiring with1100 Volts, grade 1.5 Square metre m. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Square metre m. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point/exhaust fan, controlled by one way switch complete all as specified and directed.

One ceiling fan point , controlled by one way switch through Regulaor complete all as specified and directed.

One bell point , controlled by bell push switch complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches complete all as specified and directed.

One three pin 5 Amp socket on independent board complete all as specified and directed.

One light point controlled with switch 2 way complete all as specified and directed.

All as per Item No 149 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Square metre m FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix ix in repairs for Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix ix in repairs for Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix ix in repairs for Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix ix in repairs for bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix in repairs for Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fix in repairs for Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified and directed.

Supply and fix ix in repairs for calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix in repairs for step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repairs for Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix ix in repairs for Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting complete all as specified and directed.

Supply and fix wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix in replacement of Decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, suitable for 15 Watts LED Lamp incl one LED New Odore 10W E27 WW Ball Lamp Lumen output 835 (lm) 3000K complete all as specified and directed by Engineer-in-charge

Supply and fix in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge.

Supply and fix Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/6 Nos incuding electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed.

Supply and fix Temper proof LCD display Digital Energy Meter,single phase, 2 Wire,AC, 230V, Cap 10-60A, Push to fixed type Box alongwith marking of qtr nos as directed by Engr-in-charge.

Supply and fix Ceiling fans with copper winding complete with blades ,down rods, and accessories, 230V,1200mm sweep,340 RPM,200CMM,50Watt including taking out old u/s c/fan & deposited to E/M Yard complete all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan,steel body AC single phase ,230 V of size 300 mm sweep ,made out of sturdy engineering plastic complete with louwer copper winding including taking out old u/s c/fan & deposited to E/M Yard complete all as specified and directed by Engr-in-Charge.

Supply and fix Water storage elaectric geyser ,copper tank ,2 KW, cap 25 Ltr ,230 v AC Complete with all accessories incl PVC Connection & safety devices complete all as specified and directed.

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fixing in replacement for Distribution board TPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

Supply and fix ix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'B' series confirming to IS complete all as specified and directed.

Supply and fix ix in repairs MCB SPN 240 Volt 10 KA 32 Amp 'B' series conforming to IS complete all as specified & directed.

Supply and fix ix in repairs MCB SPN 240 Volt 10 KA 40 Amp 'B' series conforming to IS complete all as specified & directed.

Supply and fixing in replacement for Distribution Box MCB Protected Socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP all as specified & directed.

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Square metre m (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Square metre m (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

M/s Pradeep Kumar

M/s RP AGRAWAL