REPAIRS TO JOINERY SANITARY FITTINGS FLOORING CEILING WALL ROOF SEWAGE LINE AND PERIODICAL SERVICES TO BUILDINGS ETC AT ICGS BEYPORE AND CGRA KOZHIKODE

Amount

Material and Labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed.

Material and Labour for preparation of old decorated surfaces of ceiling/sofit of chajja & canopy and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old treated wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying one coat of colour wash complete all as specified and as directed.

Material and Labour for preparation of old treated surfaces of wall and applying one coat of exterior emulsion anti fungal paint over upto 4th storey height including necessary scaffolding work complete all as specified and as directed.

Material and labour for preparation of old treated wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying one coat of synthetic enemal paint complete all as specified and as directed.

Material and labour for preparation of old treated steel surfaces of any description exceeding 10cm width or grith not otherwise specified and applying one coat of synthetic enemal paint complete all as specified and as directed.

Material and labour for preparation of old treated surfaces of ceiling and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old treated wall surfaces and applying one coat of acrylic distemper complete all as specified and as directed.

Cleaning blocked sewage line up to 150 mm dia pipe by rodding from one manhole to next manhole, washing thouroughly with fresh water & removing all sludge from the sewage line including removing existing manhole covers & refixing properly after cleaning and disposal of sludges outside MD land as directed all as specified and directed.

Cleaning man holes of any size and depth not exceeding 1.5metres by bailing out waste water, removing night soil & sediments & disposing off out side MD land, cleaning the external surfaces with fresh water & fixing the manhole over including disposal of sludges/water outside MD land as directed complete all as specified and directed.

Cleaning septic tanks of 10 to 250 users capacity by pumping out/bailing out waste water, removing night soil & sediments & disposing off out side MD land, cleaning the external surfaces with fresh water & fixing the manhole over including disposal of sludges/water outside MD land as directed complete all as specified and directed.

Removing blockages from water closet pans, IEC/WEC traps, gully traps, floor or nahani traps & bends by rodding thoroughly and pouring water under pressure or by compressive air pressure and cleaning and clearing the drainage to efficient and smooth flow of sludge / waste water including dispose off rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of demolished materials complete all as specified and as directed.

Supply and Fix TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for unreinforced complete all as specified and as directed.

Material and labour for 150mm thick Plain cement concrete 1:5:10, type E2, using 40mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Demolition of brick or stone masonry built in cement mortar including all quoins,arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc complete all as specified and as directed.

Material and labour for rendering 20mm thick in CM 1:4 on fair face of stone masonry surface, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work/concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Precast cement concrete solid block masonry using soild PCC block type C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles as directed including use of form work as necessary all as specified and as directed.

Supply and laying 300mm dia Reinforced cement concrete hume pipes class NP2, laid and jointed complete with one collar per length of pipe and including demolition and breaking up existing unserviceable drains pipes complete all as specified and as directed.

Supply and laying 150mm dia Reinforced cement concrete hume pipes class NP2, laid and jointed complete with one collar per length of pipe and including demolition and breaking up existing unserviceable drains pipes complete all as specified and as directed.

Material and labour for concrete bed to drain pipes of 300 mm bore with cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes all as specified and as directed.

Material and labour for concrete bed to drain pipes of 150 mm bore with cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes all as specified and as directed.

Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slabs of man holes including necessary form work, placed in position, set in CM 1:6 complete all specified and as directed. NOTE: Reinforcement shall be measured and paid separately.

Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device etc complete all as specified and directed.

Taking down chowkat with shutters( without taking off shutters from the frame) exe 1.5 Sqm but n.exc 4 Square metre complete all as directed.

Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, fixed to wall and making good to wall all as specified and directed.

Supply and fix Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube, supporting & fixing in opening as per specifications complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete all as specified and as directed.

Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 30mm thick with lock rail and with panels of 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix mild steel butt hinges, of size 100mm medium weight, cold rolled mild steel & fixed complete all as specified and as directed.

Supply and fix aluminium handles cast type anodised of size 125mm complete all as specified and as directed

Supply and fix 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type and fixing clipsof sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fix 250mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type and fixing clipsof sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fix Butt hinges 125 mm length, extruded brass with mild steel hinge pin, bright polished and fixed , type B-11 complete all as specified and as directed.

Material and Labour for applying two coats synthetic enamel paint over one coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc. complete all as specified and as directed.

Material and labour for preparation of old treated wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying two coats of colour wash on walls all as specified and as directed.

Material and labour for applying two coats of cement based paint wall over a coat of white cement primer including preparation of new surface of wall complete all as specified and directed.

Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 including dismantling damaged flooring complete all as specified and as directed.

Material and Labour for laying 3.2 mm thick Linoleum plain sheet as in flooring coloured sheet laid and sealed with an approved adhesive as per manufacturers instruction on existing concrete floor surface after preparation of surface complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 11,925.00 NOTE: Bidder shall insert credit amount of Rs. 11,925.00 as rate in Green field under Col-13.

ANAND REFRIGERATION