Kerala

AOC

Works

Civil Works - Others

DP KKD 2025-26 Proj.932/26 Swami guruvarananda memerial higher secondary school kolathur Compound wall and Maintenance nanmanada pt

Local Self Government Department

Nanmanda | Kozhikode, Kerala

Amount: ₹8.4 LCloses: 8 Aug 2025Closed

Timeline

Published31 Jul 2025
Closed8 Aug 2025
Awarded14 Nov 2025

Bids

Item Rate

2 Bids14 Nov 2025

#	Company	Amount	Rank	Status
1	MOIDEENKOYA PP L1₹7.1 LAccepted-AOC KERALA KL	₹7.1 L	L1	Accepted-AOC L1
2	shyju Rejected-Technical	-	-	Rejected-Technical L2

BoQ Comparative

Line Items (18)

Sl No	Description	Qty	Unit	MOIDEENKOYA PP L1	shyju L2
1.00HSS building maintenance
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	939.8	kg	149.71 ₹1,40,697.46 Lowest	166 ₹1,56,006.8
1.00	OD176869/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitchofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthicknesswith zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length up to 12 metre or as desired by Engineer-in-charge. Thesheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.	3.9	sqm	510.14 ₹1,989.55 Lowest	565 ₹2,203.5
1.00	2.7.1:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock	0.73	cum	399.08 ₹293.32 Lowest	442 ₹324.87
1.00	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	0.91	cum	2,829.69 ₹2,572.19 Lowest	3,136 ₹2,850.62
1.00	50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.	1.44	cum	6,283.48 ₹9,041.93 Lowest	6,965 ₹10,022.64
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	48.41	sqm	284.94 ₹13,795.37 Lowest	315 ₹15,250.73
1.01	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	28	kg	545.79 ₹15,282.12 Lowest	604 ₹16,912
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	15.95	sqm	985.5 ₹15,718.73 Lowest	1,092 ₹17,417.4
1.01	14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)	42.96	sqm	446.76 ₹19,192.81 Lowest	495 ₹21,265.2

Tender Value

₹8.4 L

EMD Value

₹21,076

Closing Date

8 Aug 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

LID and EW Division Kozhikode

Work Description

Compound wall and Maintenance

Tender Information

Tender ID

2025_LSGD_781091_1

Reference Number

EE/LSGD/KKD/32/2025-26

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

180 days

Location

Nanmanda

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredTender schedule (.xls)

RequiredScanned document of duely filled and signed Preliminary agreement in the form of VI (2) of SBD (.pdf)

RequiredScanned document of duely filled and signed E payment form in the form of VI (6) of SBD (.pdf)

RequiredScanned document of duely filled and signed Integrity pact in the form of VI (3) of SBD (.pdf)

RequiredScanned document of duely filled and signed Affidavit in the form of VI (4) of SBD (.pdf)

RequiredScanned document of duely filled and signed Form of Tender in the form of VI (1) of SBD (.pdf)

RequiredSBD Downloaded from Etender Website (.pdf)

RequiredScanned document of GST Registration and Bank pass book (.pdf)

RequiredScanned document of License ,Pan card and Aadhar card (.pdf)

RequiredTender conditions (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,860

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹21,076

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

14 Nov 2025

Published

31 Jul 2025

Bid Opening

11 Aug 2025

Download Starts

31 Jul 2025

Download Ends

8 Aug 2025

Submission Starts

31 Jul 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1280717.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

MOIDEENKOYA PP

L1₹7.1 LAccepted-AOC

KERALA KL

shyju

Rejected-Technical

Sl No	Description	Qty	Unit	MOIDEENKOYA PP L1	shyju L2
1.00HSS building maintenance
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	939.8	kg	149.71 ₹1,40,697.46 Lowest	166 ₹1,56,006.8
1.00	OD176869/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitchofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthicknesswith zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length up to 12 metre or as desired by Engineer-in-charge. Thesheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.	3.9	sqm	510.14 ₹1,989.55 Lowest	565 ₹2,203.5
1.00	2.7.1:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock	0.73	cum	399.08 ₹293.32 Lowest	442 ₹324.87
1.00	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	0.91	cum	2,829.69 ₹2,572.19 Lowest	3,136 ₹2,850.62
1.00	50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.	1.44	cum	6,283.48 ₹9,041.93 Lowest	6,965 ₹10,022.64
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	48.41	sqm	284.94 ₹13,795.37 Lowest	315 ₹15,250.73
1.01	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	28	kg	545.79 ₹15,282.12 Lowest	604 ₹16,912
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	15.95	sqm	985.5 ₹15,718.73 Lowest	1,092 ₹17,417.4
1.01	14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)	42.96	sqm	446.76 ₹19,192.81 Lowest	495 ₹21,265.2

Sl No

Description

Qty

Unit

MOIDEENKOYA PP

shyju

1.00HSS building maintenance

1.00

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

939.8

149.71

₹1,40,697.46

Lowest

166

₹1,56,006.8

1.00

OD176869/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitchofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthicknesswith zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length up to 12 metre or as desired by Engineer-in-charge. Thesheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

3.9

sqm

510.14

₹1,989.55

Lowest

565

₹2,203.5

1.00

2.7.1:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

0.73

cum

399.08

₹293.32

Lowest

442

₹324.87

1.00

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

0.91

cum

2,829.69

₹2,572.19

Lowest

3,136

₹2,850.62

1.00

50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

1.44

cum

6,283.48

₹9,041.93

Lowest

6,965

₹10,022.64

1.01

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

48.41

sqm

284.94

₹13,795.37

Lowest

315

₹15,250.73

1.01

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

545.79

₹15,282.12

Lowest

604

₹16,912

1.01

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

15.95

sqm

985.5

₹15,718.73

Lowest

1,092

₹17,417.4

1.01

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

42.96

sqm

446.76

₹19,192.81

Lowest

495

₹21,265.2