Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC ITTIKUNNATH X 386 KOREPARAMBIL ROAD NJARACKAL ERNAKULAM 682505 | ERNAKULAM | ERNAKULAM | KERALA | 682505 | ₹9.3 L Quoted ₹10.2 L | L1 | Accepted-AOC Being Lowest Tenderer |
| 2 | L2₹10.5 L+₹23,630 (2.31%)Rejected-Finance | ₹10.5 L+₹23,630 (2.31%) | L2 | Rejected-Finance Other than Lowest Tenderer |
| 3 | L3₹10.6 L+₹39,015 (3.81%)Rejected-Finance PARUTHIYEZHATHU HOUSE MULAVUKAD P O NORTH ERNAKULAM 682 504 | ERNAKULAM | KERALA | 682504 | ₹10.6 L+₹39,015 (3.81%) | L3 | Rejected-Finance Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | HIGH TECH ENGINEERS AND CO L1 | GOLDEN EYE BUILDERS L3 | AB CONSTRUCTIONS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Disconnection of electrical wire from ceiling rose and taking down the ceiling fan any capacity/ type / size and make including dismantling the ceiling fan for removal of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning and re-fixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut, bolts washers etc. connection with flexible wire & testing complete after replacement of burnt out/ worn out copper winding and existing same gauge of copper wire winding/ unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5m long including testing the repaired ceiling fan to the entire satisfaction of engineer in charge.
NOTE:- (Rewinding of ceiling fan and PVC wire for making connection and spares as required shall be measured and paid separately under respective items.) | 800 | Each Job | 80 ₹64,000 | 75 ₹60,000 | 45 ₹36,000 Lowest |
| 2.00 | Material and labour for rewinding of ceiling fan 230 volts of any capacity/make/type and size (1200/1400 mm) with existing same gauge copper wire winding and number of turns as to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of starter/ rotor complete all as specified and as directed.
Note: (Ceiling fan before fixing at site the RPM shall be checked and match as per manufacturer's specification till entire satisfaction of Engineer in charge. | 800 | Each Job | 550 ₹4,40,000 Lowest | 550 ₹4,40,000 Lowest | 590 ₹4,72,000 |
| 3.00 | Carrying out re-metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to entire satisfaction of Engineer in change.
(Note : bearing shall be measured and paid separately ) | 80 | Each Job | 95 ₹7,600 | 125 ₹10,000 | 90 ₹7,200 Lowest |
| 4.00 | Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan for obtained from Sl item No.1, all as specified and as directed. Make - TATA/NBC/SKF | 800 | Each | 95 ₹76,000 | 170 ₹1,36,000 | 43 ₹34,400 Lowest |
| 5.00 | Supply only capacitor of capacity 2.5 MFD, 220 volt ISI marked all as specified and as directed. | 800 | Each | 80 ₹64,000 | 48 ₹38,400 | 45 ₹36,000 Lowest |
| 6.00 | Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm all as specified and as directed. | 70 | RM | 40 ₹2,800 Lowest | 45 ₹3,150 | 42 ₹2,940 |
| 7.00 | Supply only suitable size of bush for ceiling fan of any type/size obtained from Sl item No.1, all as specified and as directed. Make - TATA/NBC/SKF | 300 | Each | 30 ₹9,000 | 70 ₹21,000 | 5 ₹1,500 Lowest |
| 8.00 | Supply and fixing in repairs PVC connector 4 way 6 Amps with connection screws, nuts etc. complete all as specified and as directed. | 110 | Each | 20 ₹2,200 | 15 ₹1,650 | 4 ₹440 Lowest |
| 9.00 | Supply and fixing in repairs PVC clamps with fixing screws for holding capacitor of any type and size, all as specified and directed. | 100 | Each | 10 ₹1,000 | 16 ₹1,600 | 8 ₹800 Lowest |
| 10.00 | Supply and fixing in repairs Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double fasteners M10 x 75mm for hanging ceiling fan instead of worn out hook as specified and as directed. | 30 | Each | 110 ₹3,300 | 185 ₹5,550 | 35 ₹1,050 Lowest |
Tender Value
₹12.8 L
EMD Value
₹25,500
Closing Date
5 Aug 2025, 6:00 pmClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIR/ MAINT OF CEILING FAN EXHAUST FAN AND CONNECTED ITEMS IN SMA RAMESWARAM, DAD RESIDENTIAL COMPLEX, PAMPA VIHAR I AND II AT PALLURUTHY UNDER GE FORT KOCHI
2025_MES_719143_1
8235/E8_GE_FORT_KOCHI
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
FORT KOCHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE FORT KOCHI
₹25,500
Yes
29 Sept 2025
8 Jul 2025
12 Aug 2025
8 Jul 2025
5 Aug 2025
22 Jul 2025
Amount
Disconnection of electrical wire from ceiling rose and taking down the ceiling fan any capacity/ type / size and make including dismantling the ceiling fan for removal of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning and re-fixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut, bolts washers etc. connection with flexible wire & testing complete after replacement of burnt out/ worn out copper winding and existing same gauge of copper wire winding/ unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5m long including testing the repaired ceiling fan to the entire satisfaction of engineer in charge. NOTE:- (Rewinding of ceiling fan and PVC wire for making connection and spares as required shall be measured and paid separately under respective items.)
Material and labour for rewinding of ceiling fan 230 volts of any capacity/make/type and size (1200/1400 mm) with existing same gauge copper wire winding and number of turns as to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of starter/ rotor complete all as specified and as directed. Note: (Ceiling fan before fixing at site the RPM shall be checked and match as per manufacturer's specification till entire satisfaction of Engineer in charge.
Carrying out re-metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to entire satisfaction of Engineer in change. (Note : bearing shall be measured and paid separately )
Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan for obtained from Sl item No.1, all as specified and as directed. Make - TATA/NBC/SKF
Supply only capacitor of capacity 2.5 MFD, 220 volt ISI marked all as specified and as directed.
Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm all as specified and as directed.
Supply only suitable size of bush for ceiling fan of any type/size obtained from Sl item No.1, all as specified and as directed. Make - TATA/NBC/SKF
Supply and fixing in repairs PVC connector 4 way 6 Amps with connection screws, nuts etc. complete all as specified and as directed.
Supply and fixing in repairs PVC clamps with fixing screws for holding capacitor of any type and size, all as specified and directed.
Supply and fixing in repairs Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double fasteners M10 x 75mm for hanging ceiling fan instead of worn out hook as specified and as directed.
Supply and fixing in repairs heavy duty Steel with rubber cushion for ceiling fan hook attachment clamp with fan rod nut bolt & locking pins complete set, all as specified and as directed
Supply and fixing in repairs ceiling fan blade of 1200/1400mm size of existing Make including proper painting matching with existing ceiling fan all as specified and as directed.
Supply and fixing in repairs PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws all as specified and as directed.
Supply and fixing in repairs down rod 1'/1.5' suitable for ceiling fan of any type/make for both end of down rod including fixing screws all as specified and as directed.
Cleaning of ceiling fan assembly of any type/size and carrying out two coats of spray painting with first quality synthetic enamel paint of approved colour, including writing of MES number in black paint all as specified and as directed.
Disconnection of electrical wire from ceiling rose and taking down the exhaust fan any capacity/ type / size and make including dismantling the exhaust fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning and re-fixing the exhaust fan in own position with provision of hanging bush, cotter pins, nut, bolts washers etc. connection with flexible wire & testing complete after replacement of burnt out/ worn out copper winding and existing same gauge of copper wire winding/ unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repaired exhaust fan to the entire satisfaction of Engineer in charge. NOTE:- (Rewinding of exhaust fan and PVC wire for making connection and spares as required shall be measured and paid separately under respective items.)
Supply and fixing in repairs switch piano, flush type, single pole, one way, 6 Amps ISI marked complete all as specified and as directed.
Supply and fixing in repairs electronic Fan regulator stepped type flush type 120 W suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as required complete all as specified and as directed.
Material and labour for rewinding of exhaust fan 230 volts of 300 mm sweep of any make/type with super enamelled copper wire of appropriate gauge winding and number of turns as existing to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all worn out material as required, replacement of all insulation materials, varnishing, heating, drying, reassembling of exhaust fan and fitting, connection & testing complete all as specified and as directed. Note: (Exhaust fan before fixing at site the RPM shall be checked and matched as per manufacturer's specification till entire satisfaction of Engineer in charge.
All as per item No 19 above but 380 mm sweep, all as specified and as directed.
All as per item No 19 above but 450 mm sweep, all as specified and as directed.
Supply and fixing of louver shutter made of MS sheet metal 1.2 mm thick for round/square base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mm x 3mm including heavy duty rust proof passivated bolts of size 50mm long 8mm dia to be fixed on wall after drilling, and duly painted by two coats of synthetic enamel paint (spray painting) over a coat of primer for exhaust fan up to 300/380 mm sweep complete including taking down of existing shutter all as specified and as directed.
Material and labour for fan motor suitable for PVC body exhaust fan up to 250 mm sweep and RPM match with existing including taking down old motor and fixing of new with proper alignment using necessary mounting screws and accessories without any vibrations and noise to the satisfaction of Engr-in-Charge.
Supply and fixing in repairs capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified and as directed.
Supply and fixing in repairs PCB (Printed Circuit Board) for BLDC fan of any make/type and size (1200/1400) mm sweep as existing to obtain the specified and satisfactory RPM as per manufacturer's specification and as directed. Note : Ceiling fan before fixing at site the RPM shall be checked and matched as per manufacturer's specification till entire satisfaction of Engr in charge.
AB CONSTRUCTIONS (BID ID -3383896)
GOLDEN EYE BUILDERS (BID ID -3383137)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .