Essential electrical works at various sites under AE(Elect) KBN, MTNL, New Delhi.

Supplying following rating copper conductor PVC flexible cable of 1.1 KV grade on wall / cable tray i/c connection etc as reqd.(ISI marked) (a) 3 core 1.5 sq. mm Copper cond cable Make-Kalinga/polycab/Havells/National/Gloster/SS

SITC of 1 HP Booster Pressure Pump suitable for 230 V 50 HZ Single phase supply with pressure controller suitable to discharge constant water pressure and head of 45-7 mtr(adjustable pressure 1.5 to 5.0 bar) the pump set shall be silent operation, wide performance range with high efficiency of electric motor stainless steel part suitable to handle water 15-70 LPM (Discharge range) with 25 Lit pressure tank of 5.0 bar, pressure sensitive cut of mechanism i/c, C.C. work, connection etc as rqd Make- M/s Crompton Greaves

SITC of dry running protection relay with suitable sensor connection etc as rqd

SITC of single phase mini pump starter with low volt coil suitable for 1 HP booster pump complete with connection etc as rqd

SITC of following GM construction accessories with ISI mark (Leader, Jaloto ,Sant))NRV 25mm dia

b)Gate/ball valve 25 mm dia

c) Gate valve 19mm dia

d)union valve 25 mm dia

e)Tank Niple 25 mm dia

f)elbow 25 mm dia

g) T 25 mm dia

h) 25 mm dia B Class ISI Mark GI Pipe

i)Plug 25 mm dia

SITC of following PVC accessories with ISI mark Make: Supreme/Prince/Prayag a)Gate/ball valve 25 mm dia

b)union valve 25 mm dia

c)Tank Niple 25 mm dia

d)elbow 25 mm dia

e) T 25 mm dia

f) 25 mm dia C PVC Pipe with ISI Mark

g)Plug 25 mm dia

Fabrication of pressure pump cage by welding using suitable 35 x 5 mm angle iron frames (with Suitble No of Angles/flat )on 3 sides with front openable door suitable number of hinges i/c locking arrangement of door etc and fixing of water proof metallic sheet as roof cover of this cage by suitable nut bolts and fixing grouting the cage properly etc as reqd

Supplying, laying, fixing, testing and commissioning XLPE armoured power cable of 1.1 KV grade on wall / cable tray with saddles, screws etc. complete as reqd. (Make: ISI marked of Polycab / Havells) a) 3.5 Core x 150 sq.mm. Aluminium conductor

a) 3.5 Core x 120 sq.mm. Aluminium conductor

Supplying and making end termination with brass compression gland and aluminium lugs (bottle type/ bolt type) for following size of aluminium conductor XLPE armoured power cable of 1.1 KV grade as reqd. a) 3.5 Core x 150 sq.mm. Aluminium conductor

a) 3.5 Core x 120 sq.mm. Aluminium conductor

Providing and fixing following rating, breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel/ board including drilling holes in cubicle panel making connection with bus bar etc. complete as required. a) 400 Amps 35/36kA Four Pole MCCB (Make: L&T)

b) 250 Amps 36kA Four Pole MCCB (Make: L&T)

Supplying & installing of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5 % in convenient sections joined with connectors suspended with ceiling with MS suspenders i/c nut bolt, screw, painted suspenders, fasteners etc. as reqd. a) 150 mm width x 50 mm depth x 1.6 mm thickness

S.K.Electricals

Avadh Electric Company