Pdg. and laying galvanized sheet roofing with conglomerate flooring at stable in MNSS Rai in Sonipat distt.

Amount

work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6)

Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth.(HSR 10.26)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth (HSR 10.41)

Cement concrete 1:1 ½::3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.(HSR 10.86+10.95)

First class brick work laid in cement sand mortar 1:4 in foundation & plinth.(HSR 11.4)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(HSR 11.9)

12mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall (HSR 15.12)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.(HSR 16.25)

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work.(HSR 16.57)

Providing two coat of exterior acrylic emulsion paint as per (HSR 16.79)

Providing and applying two cates white cement based puty over plastered surface and grinding the durface smooth eiht sand paper to get an even and smooth finish including cost and carriage of all material, labour charge, scaffolding, sundries etc. complete (J.K/ Birla make)(HSR 16.81)

Structural steel work in compound girders or stanchions built up from two or more R.S. joists or channel section or plates and Angles etc., riveted including cutting and Fixing all lattice bars, stiffeners, gusset plates, Bolts, nuts, rivets etc., complete with flange Plates, heads sole, plaster, angle connections, Etc. with hoisting and erection in position angle iron, etc(HSR 18.9) (a) with two or more R.S. Joits size 250x125mm

(b) with two or more Channels size 100x50mm

Fe- 500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding & placing in the position complete .(HSR 18.22)

Construction brick masonary inspection chamber size as given below up to 0.60 Meter av. Depth. (HSR 29.84)(a)size 450mmx450mm inside

Providing & fixing G.I. colour coated Galvanized Metal sheet roof of 0.50mm (TCT) thick rib profile Pre coated galvanized trapezoidal sheet having minimum pitch of 50mm C/C ( .N.S.)

Prooviding & fixing CPVC pipe including all speials. (N.S.)(a) 1"

Providing & fixing G.I. Pipe including all specials. (N.S.) (a) 3/4"

Providing & fixing CPVC Ball valve 1".(N.S.)

Providing & fixing 50mm dia G.I. Pipe.B-class. (N.S.)

The Sayara Coop L and C Society Ltd