Setting up of Board room on the 4th floor of the Vigilance and Anti Corruption Bureau

OD180071/2026-2027:WOODEN CEILING PANEL : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long drywall screws @ 230 mm interval, including fixing of plywood to ceiling section and perimeter channel with the help of drywall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides and Edge banding, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: Century Plywood or Equivalent Thickness 12 Mm and fixed one side with 2 mm decorative century veneer.

OD180072/2026-2027:Supplying and providing wall paneling with WPC decorative Wall fluted Panels 12mm fixing with levels etc. complete

OD180069/2026-2027:WOODEN PANEL - Century plywood or equivalent 12 mm thick wood paneling, with 2mm decorative Century veneer on one side, fixed to the walls with screws and fasteners, including melamine polishing with filler and clear coat. After rubbing and finishing to obtain the grain and structure of the wood as per the design and instructions of the engineer in charge.

OD180073/2026-2027:Providing and fixing manual controlled zebra curtains/blinds made of premium quality fabric around aluminium tube to be raised and lowered by ball chain pulley, to provide adequate privacy and light control as per architect approved shade .including cost and conveyance of all materials labour charges etc.

OD180067/2026-2027:Fabrication supply, providing U-shaped conference table including all fittings, completing all installation and transportation, etc.

OD180068/2026-2027:Supplying and Fixing Conference room chairs

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

8.3.2:Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.6:Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.