Construction of Sump & Pump room At Bilodara Jail Nadiad Dist- Kheda (Including of Electrical)

Name of Work :- Construction of Sump & Pump room At Bilodara Jail Nadiad Dist-Kheda (Including of Electrical)

SOR 2024-25 [KHEDA]

Statement showing the approximate quantities for items of the above work to be carried out of Rs.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

1 Excavation for foundation in loose or soft soil upto 1.5 m. depth including 52.00 cum 115.92 RS: One Hundred Fifteen and

sorting out and stacking of useful materials and disposing of the excavated Paise Ninty Two only

stuff upto any Lead and lift.

2 Excavation for foundation in Dense or Hard Soil up to 1.50mt to 3.0mt Depth 38.00 cum 160.77 RS: One Hundred Sixty and

including sorting out and stacking of useful materials and disposing of Paise Seventy Seven only

excavated staff up to any lead and lift.

3 Providing and laying Cement concrete 1:3:6(1cement:3coarse sand :6 3.25 cum 2976.00 RS: Two Thousand Nine

Machine crush stone aggregate 40mm nominal size) and curing etc complete Hundred Seventy Six only

including cost of form work in (A) Foudation and plinth

4 Providing & laying controlled cement concrete M 250 including finishing 5.00 cum 4550.55 RS: Four Thousand Five

smooth with curing complete including cost of formwork but excluding the Hundred Fifty and Paise Fifty Five

cost of reinforcement in Foundation Footing and mass concreteRates Are only

Inclusive Of Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

5 Providing and laying controlled cement concrete M-250 including finishing 14.00 cum 7753.45 RS: Seven Thousand Seven

smooth with curing complete including cost of formwork but excluding cost Hundred Fifty Three and Paise

of reinforcement in vertical & horizontal WALL having any thickness for FOR Forty Five only

ANY HEIGHT .Rates Are Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

6 Providing and laying Controlled cement concrete M-250 and finishing smooth 0.75 cum 8737.52 RS: Eight Thousand Seven

with curing etc.. complete including the cost of formwork but exculding the Hundred Thirty Seven and Paise

cost of reinforcement for BEAMS having any cross sectional area for Fifty Two only

GROUND FLOOR. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

7 Providing and laying Controlled cement concrete M-250 finishing smooth with 3.50 cum 7702.61 RS: Seven Thousand Seven

curing etc. complete including the cost of formwork but exculding the cost of Hundred Two and Paise Sixty One

reinforcement for R.C.C. work in SLAB having thickness of 13 cm TO 15cm. only

for ground Floor. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

8 Providing and laying Controlled cement concrete M-250 finishing smooth with 1.75 cum 8126.51 RS: Eight Thousand One

curing etc. complete including the cost of formwork but exculding the cost of Hundred Twenty Six and Paise

reinforcement for R.C.C. work in SLAB having thickness of 10 cm TO 13cm. Fifty One only

for ground Floor. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

9 Provinding 10 mm thick cement PLASTER in single coat of interior 120.00 smt 198.56 RS: One Hundred Ninty Eight

plastering and finished even and smooth in cement mortar 1:3 ( 1 cement : 3 and Paise Fifty Six only

sand ) and finishing with floating coat of neat cement slurry including

providing and mixing WATER PROFFING material in C.M in proportion

recomended by the manufacturer including finishing with a flaoting coat of

neat cement slurry. FOR ALL FLOOR

10 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern 35.00 kg 74.94 RS: Seventy Four and Paise

fabricated from M.S. flat,square bars, round bars,c-channel, square/round box Ninty Four only

pipe as per detail Drawings. Rate is inclusive of welding with grinding smooth

surface, two coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be used as per Approved Material List By

G.S.P.H.C The M.S Steel Structured steel shall be used only ISI Mark

11 Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 62.00 rmt 23.45 RS: Twenty Three and Paise

1 : 1 including neat cement finishing, watering etc. Complete. Forty Five only

12 Providing T.M.T. Fe-500 Steel reinforcement for RCC work including cutting, 2,380.00 kg 75.46 RS: Seventy Five and Paise

bending, binding and placing in position etc. complete for all floors. Forty Six only

13 Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of 18.50 cmt 129.10 RS: One Hundred Twenty Nine

foundations etc. in layers NOt exceeding 20 cms. In depth consolidation each and Paise Ten only

deposited layer by ramming and watering.

14 Brick work using common burnt clay building bricks having crushing 11.00 Cum 4246.86 RS: Four Thousand Two

strength not less than 35 Kg/Sq.cm.in Ground Floor in cement mortar 1:6 (1- Hundred Forty Six and Paise

cement;6-coarse sand), Conventional bricks.Bricks with frog only shall be Eighty Six only

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

15 Providing 10mm. thick cement plaster in single coat on ceiling for interior 15.00 Sqm 215.31 RS: Two Hundred Fifteen and

plastering and finished even and smooth in C:M 1:4 (1 cement; 4 sand) Paise Thirty One only

including finishing with a floating coat of neat cement slurry AT GROUND

16 Providing 15 mm. thick cement plaster in single coat on wall for interior 100.00 Sqm 219.41 RS: Two Hundred Ninteen and

plastering and finished even and smooth in C:M 1:4 (1 cement; 4 sand) Paise Forty One only

including finishing with a floating coat of neat cement slurry AT GROUND

17 Providing 20mm thick SAND FACED cement plaster on walls above ground 60.00 Sqm 332.33 RS: Three Hundred Thirty Two

level consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and and Paise Thirty Three only

8mm thick finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any

height.(Gukta Plaster) For up to (G+3)

18 Ceiling painting (two coats) with plastic emulsion paint Shall be Of Rangoli 15.00 Sqm 188.49 RS: One Hundred Eighty Eight

Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian and Paise Forty Nine only

Paint or Dulux Interior A 900 of Dulux Paint and manufacture on undecorated

wall surface to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand papered

smooth With Applying two coats of Fine Putty ........

...........Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare Wall

Putty of Asian Paint or Dulux Polly Putty of Dulux Paint & One coats of primer

of BP White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior

Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint and manufacture

on new wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand papered

19 Wall painting (two coats) with plastic emulsion paint Shall be Of Rangoli Total 100.00 Sqm 176.01 RS: One Hundred Seventy Six

Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or and Paise One only

Dulux Interior A 900 of Dulux Paint and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free

from mortar droppings.......

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

.......... and other foreign matter and sand papered smooth With Applying two

coats of Fine Putty Shall be of Bison Wall Putty of Berger Paint India Ltd or

Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint & One

coats of primer of BP White Primer of Berger Paint India Ltd or Asian Paint

Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

20 Finishing wall with weather proof exterior emulsion paint on wall surface 60.00 Sqm 147.68 RS: One Hundred Forty Seven

(two coats) over and above applying One Coat Of Primer to give an required and Paise Sixty Eight only

shape even shade after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials.etc ......

.........complete. Primer Shall be Weather Coat Exterior Primer of Berger Paint

India Ltd or Asian Paint Trucare Exterior Primer of Asian Paint Or Exterior

Sealer E 900 of Dulux Paint only and exterior emulsion paint Shall be Weather

Coat Smooth of Berger Paint India Ltd or Apex Weather Proof Emulsion of

Asian Paint or Dulux Weather Shield Projecs of Dulux Paint Only

21 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for 1.50 Sqm. 2428.00 RS: Two Thousand Four

jambs and sills of doors & windows using neat cement slurry laid over 20 mm Hundred Twenty Eight only

average base of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with

grey cement slurry including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base

of neat cement) as per direction of Engineer in charge including rounding the

exposed edges as directed.

22 Pro and Laying 25mm thick Doubel Pre polished ( Dimond polished ) polished 12.00 Sqm 1078.70 RS: One Thousand Ten

kota stone flooring over average 20mm thick base of cement mortar 1:6 ( 1 Hundred Seventy Eight and Paise

cement : 6 coarse sand ) and jointeed with gray cement slarry including Seventy only

rubbing and polishing etc. complete All kota stone edge shall be hand cutting

Machine Cut shall be not allowed..

23 Pro and Laying Doubel Pre polished ( Dimond polished ) polished kota stone 2.00 Sqm 1215.70 RS: One Thousand Two

slab 25mm thick in risers of steps.dedo,skarting and pillars laid on 10mm Hundred Fifteen and Paise

thick cement mortar 1:3 ( 1 cement : 3 coars sand ) and jointed with gray Seventy only

cement slarry including rubbing & polishing etc. complete

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

24 Providing and laying integrated cement based proprietary water proofing 12.00 Sqm 595.22 RS: Five Hundred Ninty Five

treatment of required thickness over the roof including providing and and Paise Twenty Two only

applying two coat of Acrylic polymer of approved brand & manufactures and

china mosaic fitting and finally finishing the surface with white cement slurry

and sloping out terrace slabs with following specification laid to required

slope not flotter than 1 : 80(incl treating the vertical surface of the parapet

wall upto 20cms height above finished level of terracing including

finishing,curing,testing etc. comp.Rate is incl. ten years performance of

guarantee bond to be given on stamp paper.(No extra shall be paid for

increase in thickness for proper slope)

(A) Applying a two coat of Acrylic based polymer of approved brand &

manufactures and as per recommandation of manufactures over the RCC slab

incl.clearing the surface before treatment.

(B) Finishing the surface with china mosaic pieces laid on 10mm thick joint

less cement mortar of mix 1:3(1 cement : 3 coarse sand)admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry.

(C) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing for final test.All above operations to be done in

order and as directed and specified by the engineer in charge.

25 32 mm Thick Soild Flush Door Shutter With Both Side 1mm Laminates 3.00 Sqm 8399.74 RS: Eight Thousand Three

(Century, Signature, Royal Touch Only ) with Fillar..Indian Pine/SYP With Hundred Ninty Nine and Paise

Door Frame Of Finger Jointed Meranti timber Wood Including Teak Wood Seventy Four only

bedding Patti on all Peripheries of Rail of Shutters with Paint Including Door

Frame Shall be Paint With Matching of Laminates of Door Shutter. (Rs. / Sqm.

). complete as per direction of Engineer – in- charge, manufactacturer’s

specification and drawing. 112*68

26 Providing and fixing standard extruded of ALLUMINIUM SECTION of size 1.00 Sqm 1163.92 RS: One Thousand One

63mm x 38.10mm x 1.2mm (Jindal Section :2434,@Wt.0.643 kg per mt) with Hundred Sixty Three and Paise

colour anodized alluminium frame for ventilation with 5mm thick frosted Ninty Two only

glass as details etc complete for VENTILATION.

27 Providing & Fixing cast iron steps of size 500x150mmx22.5mm and painting 8.00 Eash 201.74 RS: Two Hundred One and

with two coats of Anti-corrosive paint etc.complete. Paise Seventy Four only

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

28 Providing & Fixing concealed centre point to wall ceiling and floor CPVC ( 58.50 Rmt 1312.94 RS: One Thousand Three

SDR 13.5) poipe having National sanitation foundation ( NSF) seal for potable Hundred Twelve and Paise Ninty

water of following dia. Nominal bore tube fittings and clamps including, Four only

making good the wall,ceiling and floor etc complete.65mm inside dia.

29 Provinding and fixing gun metal check or non return full way WHEEL / 1.00 No 4865.50 RS: Four Thousand Eight

HANDLE VALVE 65 mm dia. Hundred Sixty Five and Paise Fifty

30 Providing and laying Controlled cement concrete M-250 and finishing smooth 0.15 Cmt 8461.28 RS: Eight Thousand Four

with curing etc. complete including the cost of formwork but excluding the Hundred Sixty One and Paise

cost of reinforcement for R.C.C. work in LINTEL having any thickness for Twenty Eight only

GROUND FLOOR. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

31 Providing and laying Controlled cement concrete M-250 and finishing smooth 0.10 Cmt 9343.14 RS: Nine Thousand Three

for R.C.C. CHHAJJAS having any thickness including finishing the exposed Hundred Forty Three and Paise

surfaces with cement mortar 1:3 ( 1 cement : 3 fine sand ) to give a smooth Fourteen only

and even surface including centereing formwork and curing etc. complete

but excluding the cost of reinforcement for Ground Floor Rate are inclusive

of providing and mixing plastisizer of approved make in propertion as per

A- Civil Amount

32A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 5.00 Point 481.00 RS: Four Hundred Eighty One

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC only

insulated FRLS wire for earth continuity in FIA approved ISI mark medium

class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for

PVC pipe and boxes ...............

.............shall be filled with cement mortar and finishing the surface to match

the wall / ceiling complete with approved make 5/6 Amp. ISI make modular

type switch and accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary modular lamp holder / modular ceiling rose /

HD Connector ............

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

.........75 mm deep GI box if require ( make & model approved by EIC and

matching colour with switches accessories) as directed for concealed wiring.

Light point. Cat.-III.(Conductor resistance should be as per IS:8130/1984 )

Necessary sheet must be erected on all box to prevent mortar going into the

box.& for ceiling light Point & Junction box use deep Junction box of same

PVC Pipe make . Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long point.

(For future ..........

........extention, if required, agency has to erect one higher size metal box and

modular plate as per instruction of EIC. Cost of blank plate shall be paid as

per tender item) [Wire must be having box packing][This item include

cleaning(inside/outside) of all GI switch boards,electric point box,fan

box,MCBDB & box cutting plaster finishing for modular plate without any

32B For Fan Point (with 6 A. Modular type switch and two module hum free EME 1.00 Point 668.00 RS: Six Hundred Sixty Eight

Five or more step type electronic fan regulator both having ISI mark) Cat.-III only

32C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 1.00 Point 505.00 RS: Five Hundred Five only

32D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both 2.00 Point 255.00 RS: Two Hundred Fifty Five

having ISI mark ) Cat.-III only

33 Providing and erecting Medium Class FIA approved and ISI mark white colour 30.00 Mtr. 24.00 RS: Twenty Four only

(embossed) RIGID PVC PIPES of following size complete erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

34 Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 50.00 Mtr. 62.00 RS: Sixty Two only

grade with FIA approved ISI mark medium class 20/25/32 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution to be erected

on/in brick wall / slab along with continuous G. I. fish wire to draw mains laid

in approved manner with plastering by cement mortar & finishing the surface

to match the .........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

..........wall / ceiling complete with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) (Conductor resistance should be as per

IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor

mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code. (with 20 mm dia. PVC pipe) [Wire must be

having box packing]

35 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe 10.00 Mtr. 37.00 RS: Thirty Seven only

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of

following sizes.

36 Providing following type of Modular Type Accessories mounted with 20 G 10.00 Each 25.00 RS: Twenty Five only

company fabricated metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with necessary connection. As

desired by Engineer in charge. a) Blank Plate Single. Cat.-III

37A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore 2.00 Each 7025.00 RS: Seven Thousand Twenty

of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Five only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, ...........

..........Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised thickness must be

minimum 75 micron any where. SS Nut bolt:- 2 no.with washer suitable for

14mm dia. hole must be provided at terminal. total minimum Weight(approx.)

.......of earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

(C) Back fill Compound :-Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg. Necessary

test report must be submitted.

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

(D) Chamber and cover :-Earthing chamber should be size of

400mmX400mmX400mm depth and Cover should be heavy duty cast iron with

required size of 300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing. .............

{Make & Model to be approved by EIC) OEM has to submit all detail & sample

for approved before supplying

Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to at

least 02 ohms & voltage between neutral &Earthingupto 02 volt. Agency has

to maintain earthing& its value for one year. If required. Earthing must be

done in the presence of A.E (GSPHCL)

37B For above earthing additional charges for boring in hard rock soil (by 2.00 Each 276.00 RS: Two Hundred Seventy Six

breaker) & filling soft soil in earth pit (certificate for soil have to given by DEE only

/ AE along with photographs)

38 Supplying and erecting 8W led lamps with following wattage capacity of 220 1.00 Each 111.00 RS: One Hundred Eleven

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP

39 Supplying and Erecting LED indoor fitting of approximately 4feet long with 3.00 Each 370.00 RS: Three Hundred Seventy

LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use as only

a heat sink shall be made from Aluminum extrusion having enough strength

(sample must be approved by EIC)with polycarbonate diffuser with following

(A) Company mark/name on the fitting.

(B) Rated input voltage and ..........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

..........frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous.........

......... flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector ...........

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

40 providing and erecting Polycarbonate body surface mounting LED Bulk head 1.00 Each 780.00 RS: Seven Hundred Eighty

type 9 watt Lighting Fitting with electronic driver having THD<15% only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , IP 54 protection

,input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver

having THD > 80lm/w., -20degC to +60degC working temperature, AL frame

with Beam Angle 120deg.

41 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 1.00 Each 1929.00 RS: One Thousand Nine

to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Hundred Twenty Nine only

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9,

(4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service

value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty

premium ...........

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

..........quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White

high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: Min. 1.5 MFD (15% Tolerence) as per IS:1709-1984, (14) Down

road: up to 1.0 mtr as per site requirment, (15) Required fixing accessories,

.......wire as per site requirment, (17) No vibration and noise due to mechanical

parts. (18) Safety wire provided by manufacturer with ceiling fan. (Agency has

to erect safey wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at ERDA)

42 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC 1.00 Each 125.00 RS: One Hundred Twenty Five

bars up to 50 mm Length each side & piereced through 16 Gauge G.I Box only

having 125 mm dia & depth of 75 mm complete erected concealed in ceiling

with necessary modular type Round plate

43 Providing & erecting 240 V MCB double pole switch for motor & inductive 1.00 Each 327.00 RS: Three Hundred Twenty

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in Seven only

existing box having following capacity. For 40Amp.

44 Sheets steel powder coated enclosure suitable for incorporating One/Two 1.00 Each 175.00 RS: One Hundred Seventy Five

45 Providing and erecting metallic vitrified danger notice board as per language 1.00 Each 69.00 RS: Sixty Nine only

suggested by engineer incharge for MEDIUM VOLTAGE installation to be

erected as per IS-2551.

46 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable 130.00 Mtr. 361.00 RS: Three Hundred Sixty One

for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with only

suitable G.I. heavy guage 1.6mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor. (a) For 4 core x 4 sq.mm.

47 Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 30.00 Mtr. 141.00 RS: One Hundred Forty One

stranded, annealed copper conductor with heat resistant PVC insulated only

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

For One wire 16.00 Sq.mm (Conductor resistance should be as per

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

48 Providing & fixing Solderless crimping type Copper lugs conforming to IS 10.00 Each 8.00 RS: Eight only

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner. [a] 1.5/2.5 to 6 Sq.mm

49 Providing & fixing double compressed heavy duty flange type brass cable 4.00 Each 43.00 RS: Forty Three only

gland with rubber ring for P V C insulated armoured cable complete with

outgoing tails, insulating tape etc. For following size cables. (a)For 2 to 4 core

x 4.0 Sq. mm (Sigma, MCI, Comet Make Only)

50 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming 95.00 Mtr. 117.00 RS: One Hundred Seventeen

to IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity with only

anti rodent and ultra violet material properties with necessary connecting

accessories of same material at required depth to be laid 90 cms. under

ground for laying of cable below ground / road surface for enclosing cable

and back filling the same to make ground as per original. (A)For Outer

dia.50mm and Inner dia. 38mm (Test Certificate to be Submitted)

51 Providing and erecting open well type horizontal submersible mono block 2.00 Each 15552.00 RS: Fifteen Thousand Five

pump set with cast iron body having following specification [E] For , 3 phase Hundred Fifty Two only

open well horizontal mono block pump set suitable for 270LPM discharge at

required head as per plumbing length and vertical & Horizontal head.Agency

has to submit the details calculation of head to GSPHCL and get approval of

................and model of pump having tender specification with TDS & GA

drawing. Suitable for 65/75 mm dia delivery pipe with 10 mtr. necessary Size

Core Flat copper flexible cable. (Body: Cast iron / Winding : Copper / stator :

Copper / rotor : Copper / shaft : SS 304 material test certificate from

manufacture shall be submitted).The model of the pump with respect to head

and discharge will be ..........

............approved by EIC. Pump should have following specifications:(1)

Minimum 10 mtr. Cu. flat cable of suitable size must be provided with

pump.(2) Pump shall be installed as per manufacturer foundation/erection

drawing or as per IS specification. (Body full C.I., stator winding- copper,

rotor- copper, shaft- SS 304, motor-Energy efficiency)

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

52 Supplying and erecting approved make 3 HP DOL type motor control cubical 1.00 Each 47062.00 RS: Forty Seven Thousand

panel made from 16 G. CRCA sheet duly epoxy powder painted inside and Sixty Two only

outside with hinged doors and locking arrangement Floor Mounting On

mm Height with MS Stand Angle & CC Foundation. Size 35 mm (H) x 35 mm

................ detail specification & quantity of material used are as under.

Panel must be with minilec relay for auotmatic change over for pump 1 &

logically without using manually change over switch (Minimum Panel Size:

1.10 meter (H) x 1.10 meter (W) x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp.,

Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Make:

Meco, Qty: 01 No. (3) Ammeter Selector Switch, Rating: 6 Amp., Rotary, Make:

Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Meco,

Qty: 01 No. (5) Volt Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty:

............Current Transformer, Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos. (7)

Indicating Lamps (R,Y,B), Rating: 22.5 mm LED, Make: Airon, Qty:03 Nos. (8)

SP MCB , Rating: 20 Amp., Make: L&T , Qty: 03 Nos. (9) Control Wiring,

Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10) Copper Busbar, Rating:

63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Outgoing Feeder (3 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA, Rating:

20 Amp., Make: L&T, Qty: 02 Nos. (2) Power Contactor (415 V) Main, Rating:

Amp., Make: L&T, Qty: 02 Nos. (3) Over Load Relay, Rating: 6-10 Amp., Make:

L&T, Qty: 02 Nos. (4) Digital Ameter (SR-65), Rating: 0-20 Amp., Make: Meco,

Qty: 02 Nos., (5) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Meco, Qty:

02 Nos. (6) Indicating ............

...........Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make: Airon, Qty: 04 Nos.

(7) Push Button (Start,Stop), Rating: 22.5 mm, Make: Airon, Qty: 02 Nos. (8)

SPP, Rating: 415 V, Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per

Amp., Make: Airon, Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm.,

Make: Any ISI, Qty: Lot (11) Power Wiring, Rating: As Per Amp., Make: Any ISI,

Item TOTAL Rate TOTAL

Description Unit Rate In Word

No. QTY Figure Amount

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA, Rating:

Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP Type, Rating: 2 KVAr, Make:

Concap, Qty: 01 No., (3) Power wiring, Rating: As Per Amp., Make: Any ISI,

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating:

Amp., Make: L&T, Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3)

Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-10KA , Rating: 20A,

Make: L&T, Qty.:01 Nos.

53 Lowering of existing submercible motor pump set complete with required No. 2.00 Each 848.00 RS: Eight Hundred Forty Eight

and size of pipes by means of proper chain pulley block and pipe wrenches. only

Job includes stacking of pipes cronologically after the checking of threads.

[d] For open well horizontal submercible pump set for sump well. (ii) 1.00 HP

54 Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . 20.00 Mtr. 342.00 RS: Three Hundred Forty Two

Pipe & erecting as directed by Engineer-in-charge with necessary plumbing only

as desired. . [d] 65 mm dia

55 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI 3.00 Each 1475.00 RS: One Thousand Four

marked with packing, flange, nuts and bolts etc.suitable for following pipe Hundred Seventy Five only

size. [a] For 65 mm dia.

56 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 20.00 Mtr. 103.00 RS: One Hundred Three

Submersible copper cable approved make of following Size. [d] 3 Core x 2.5 only

57 Providing water proof straight joint in PVC insulated flat flexible copper cable 2.00 Each 188.00 RS: One Hundred Eighty Eight

by using insulated material water proofing material and making the joint only

complete. UP to 10 Sq.mm

B - Electrical Amount

A - Civil Amount

Total DTP Amount

NADIAD Gandhinagar