LOt-01

Earth work in foundation in dry ordinary (Loam, clay or sand) including lift upto 1.5 m and lead upto 30 m and including filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m from the foundation trench.(i) For Structures (Canal VRB, DRB, PRB and other hydraulic structure)

Earth work in cutting or in embankment in ordinary Soil, excavation to be in the form of irregular pits and earth work in embankment to be in 20 cm layers, including ramming and dressing the surface to the required level and slopes and also including 1.5 m lift and 30 m lead. The earth from cutting to be used in making embankment or to be deposited as spoil bank within 30 m distance as directed by the Engineer-in-Charge.(i) In main and Branch above 30 cumecs discharge

Hiring Charges for diesel pump (5HP) including operator and p.o.l.

Centering & Shuttering of CC Work including rent of shuttering material, labour and T&P required for proper completion of work

Providing and Laying Cement Concrete in 1:2:4 (M15) with [cement : coarse sand (Fineness Modulus not less than 2.25) : 40 mm gauge stone grit] with mechanical mixing & proper curing including all materials, labour, T&P etc. but excluding the cost of necessary centering and shuttering as per direction of Engineer-in-Charge.

Class 150 brick work in 1:4 cement and coarse sand mortar including supply of all materials, labour and tools and plants etc., required for proper completion of the work.

Pointing on brick work with cement mortar 1:3(1 cement : 3 fine sand): with all labour materials T&P.

R.C.C works with cement, approved coarse sand (Fineness Modulus not less than 2.25) and 20mm gauge approved stone ballast conforming to Grade of concrete not less than (M20, 1:1.5:3), with mechanical mixing & mechanical vibration and proper curing excluding supply of reinforcement and binding the same with 24 BWG binding wire and necessary centering and shuttering etc. but including supply of all materials, labour, tools and plants etc. required for proper completion of work as per direction of Engineer-in- Charge.

Supplying and placing in position of Reinforcement including cutting, bending, binding (with 16 SWG binding wire) and including labour, tools & plants, carriage, loading unloading and stacking of all materials at site for proper completion of works at all respect.

Supplying and fixing in position of wheel guard including all labour materails T&P.

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/ return wall with HDPE Pipe 0.75 mm dia PVC Pipe for drainage spout etc, extending through the full width of the structure with slope of 1V :20H towards drawing force. Complete as per drawing and Technical Specifications.