SUPPLY, ERECTION AND COMMISSIONING OF LT ACB 800 AMP 4 POLE FOR EXISTING 400/250 KVA TRANSFORMERS AND LT MCCB FOR 100/63/25 KVA TRANSFORMERS OF 11 KV FEEDERS and REPLACEMENT OF EXISTING LINE CONDUCTOR BY AAAC AL59, 99 SQ MM COVERED CONDUCTOR OF 11 KV

Amount

De-Centralised Material

11KV AAAC AL-59 (99 sqmm) Covered conductor (SS4240813 & SS4240814) EN 50397-1:2006 the conductor shall be stranded,round,non compacted and water tight , Non compacted shall be comply with all the requirement of EN 50397-1.2006 The stranded conductor shall be longitudionally water blocked by means of a water blocking material the semi conducting screen inner insulation and outer insulation should be extruted in one step . the outer covering insulation shall be UV stabilized tracking resistant black XLPE Capacity 300 amp

MVCC Accessories as per EN 50397-2.

11KV 90 KN Tension clamp with Bail and IPC (section Pole)

11KV Suspension ties on every Pin Insulator.

11Kv IPC for CC to CC Connection in every Section Pole

11Kv IPC for CC to Bare Connection at both end and Taping

11Kv Mid Span Jointing kit at every 500Mt. Cable drum

Supply IPC with Aluminium bail for earthing

Disc Insulator with Fitting (B&S) type for 11 KV

Holding Clamp for SP-23 with N&B.

Providing 800 amp Air Circuit Breaker type complete LT Distribution board with CT including microprocessor release IPR-1 Fixed Type 4 Pole as per (IS-13947-2 and IEC 60947-2) with panel and mounting structure as per specification for 400/250 KVA Transformers

Providing 250 amp 35 KA MF four pole with adjustable micro processor relay with earth fault digitial module case circuit bracker for 100 KVA /TF with all assesries ( Enclosure) make L&T, Indo Asian, Havell's, C&S)

Providing 125 amp 35 KA MF four pole with adjustable micro processor relay with earth fault digitial module case circuit bracker for 63/25 kVa /TF with all assesries ( Enclosure) make L&T, Indo Asian, Havell's, C&S)

Al Lug 120 (105x12)

Al Lug 240 (2x12)

MS Clamp for bottom side for ST Pole SP-23/21/33 for MCCB and 11 KV fuse set/ Line Isolator

LT XLPE Cable size 1x120 sqmm (105x66 mtr) for 100/63/25 kva Trasnformers

LT XLPE Cable size 1x240 sqmm (2x64 mtr) for 250 kva Trasnformers

Supply of GI Earthing Strip size 32x5

Earthing Rod 20x2500 mm

Labour

Cartage of SP-23 Poles from store centre to nearest road site with loading, unloading at both points. (Loading ,unloading plus carriage per poles) (0 to 100 km)

ST Pole SP-23 (Bottom Portion Hot dip)

Small Material

Head load Cartage of the following poles from road side to construction site (rates are per pole /Km including loading/unloading at both points) (0 to 1 KM)

ST Pole SP-23 (Bottom Portion Hot dip)

Small Material

Excavation of earth and erection of ST pole SP 23 single support with CC Comp

Muffing of SP 23 pole

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium strip of fluorescent alternate Red and white paint 30 cm wide upto 1.5 mtrs from ground level

Fabrication of MS channel and angle

Removing of old conductor with opening of existing, jumpering and making of bundle with carriage from pit size of JE store including loading /unloading complete work

Laying, spreading, stringing and sagging of 11KV AAAC AL-59 (99 sqmm) Covered conductor (SS4240813 & SS4240814) EN 50397-1:2006 the conductor shall be stranded,round,non compacted and water tight , Non compacted shall be comply with all the requirement of EN 50397-1.2006 The stranded conductor shall be longitudionally water blocked by means of a water blocking material the semi conducting screen inner insulation and outer insulation should be extruted in one step . the outer covering insulation shall be UV stabilized tracking resistant black XLPE

Fixing of MVCC Accessories

11 KV 90KN tension clamp with bail and IPC

11 KV Suspension ties

11 KV IPC for CC to CC Connection

11 KV IPC for CC to Bare connection

11 kV Mid Span Jointing kit

Fixing of IPC with Aluminium bail for earthing

Back carriage of material from site to store (0-100 kms) including manual shifting

Cartage and Head load Cartage of material ACB, LT Cable, and other including loading and unloading from Je Store to site (0-100 kms)

Cartage of small line material from store centre Dehradun to roadsite including loading & unloading at both ends (0-100 kms)

Cartage and Head load Cartage of material MCCB, LT Cable, and other including loading and unloading from Je Store to site (0-100 kms)

Manual shifting of small line material from roadsite to worksite (0-1 kms)

Opening of 11 kV Jumper and making jumper again of section pole after complete the work

Installation of LT ACB Pannel Complete in all respect. i.e disconnection of existing cable from DTR Terminal and metering cubcial, fixing of new additional cable in ACB LT Distribution Board connecting DTR metering complete testing and commissioning of ACB connection using all lugs of proper size lugs will be provided by supplier as per required on site and narrated by Engineer in Charge of Work

Installation of Digital moulded Case Breaker on the pole with fixing of 02 nos MS Angle with the help of MS Clamp in all respect i.e i.e disconnection of existing cable from DTR Terminal, fixing of new additional cable in MCCB connecting DTR complete testing and commissioning of MCCB connection using all lugs of proper size lugs/clamp as per required site and narrated by Engineer in Charge of Work

Earthing and installation of complete chemical earthing and connection with equipment as per specifications

Fixing of Moulded case circuit braker by earth road

Laying and saging of LT XLPE Cable 1x120 sqmm

Laying and saging of LT XLPE Cable 1x 240 sqmm

AMC in First Year after one year guarantee period on MCCB 3 % on MCCB cost

AMC in 2nd year after one year guarantee period on MCCB 4 % on MCCB cost

AMC in First Year after one year guarantee period on ACB 3 % on MCCB cost

AMC in 2nd year after one year guarantee period on ACB 4 % on MCCB cost

RP INFRAPOWER PVT LTD